原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Lake Shore Temperature Controller

作者:K-Dense-AI版本 0.1.3i★ 32 (整个仓库的星标)i在你的电脑上运行代码仓库 ↗
注册名称io.github.K-Dense-AI/labmcp-lakeshore

安装方法

What it does

MCP server for Lake Shore Cryotronics 335/336/350 temperature controllers.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度0/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度7/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分7/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Lake Shore Temperature Controller。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-lakeshore.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Lake Shore Temperature Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-lakeshore": { "command": "uvx", "args": [ "labmcp-lakeshore" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Lake Shore Temperature Controller 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "labmcp-lakeshore": {
          "command": "uvx",
          "args": [
            "labmcp-lakeshore"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 Lake Shore Temperature Controller 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Lake Shore Temperature Controller,或回答中出现 Lake Shore Temperature Controller 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Lake Shore Temperature Controller

Lake Shore Temperature Controller 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Lake Shore Temperature Controller 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Lake Shore Temperature Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-lakeshore -- uvx labmcp-lakeshore 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Lake Shore Temperature Controller 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user labmcp-lakeshore -- uvx labmcp-lakeshore
  4. 在 Claude Code 中输入 /mcp

    应能看到 Lake Shore Temperature Controller 在列表中并显示已连接

  5. 试一试

    用 Lake Shore Temperature Controller 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Lake Shore Temperature Controller,或回答中出现 Lake Shore Temperature Controller 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Lake Shore Temperature Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-lakeshore": { "command": "uvx", "args": [ "labmcp-lakeshore" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Lake Shore Temperature Controller 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Lake Shore Temperature Controller 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Lake Shore Temperature Controller,或回答中出现 Lake Shore Temperature Controller 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Lake Shore Temperature Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-lakeshore": { "type": "stdio", "command": "uvx", "args": [ "labmcp-lakeshore" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Lake Shore Temperature Controller 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Lake Shore Temperature Controller 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Lake Shore Temperature Controller,或回答中出现 Lake Shore Temperature Controller 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Lake Shore Temperature Controller 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user labmcp-lakeshore -- uvx labmcp-lakeshore

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-lakeshore": {
      "command": "uvx",
      "args": [
        "labmcp-lakeshore"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-lakeshore": {
      "command": "uvx",
      "args": [
        "labmcp-lakeshore"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-lakeshore": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-lakeshore"
      ]
    }
  }
}

需要你填写的值

  • LABMCP_ADDRESS env
    仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

GitHub 星标i
32 (整个仓库的星标)
该仓库包含多个 MCP 条目,星标在排名中只计算一次
每周下载量i
39/周
许可证i
Apache-2.0
连接方式
在你的电脑上运行
最新版本i
0.1.3
分类i
其他
发布到注册中心i
2026年9月27日
代码最后更新i
2026年9月27日
作者
K-Dense-AI
软件包
pypi: labmcp-lakeshore
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于2个月前

  • ✓ 通过

    有许可证

    使用 Apache-2.0

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 labmcp-lakeshore@0.1.3 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-lakeshore.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-lakeshore)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20653 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 20653 个服务器的 45% 更新
  • 基础检查结果等于或优于此分类中其他 20653 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Lake Shore Temperature Controller 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于2个月前,最新版本(0.1.3)于2个月前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582514个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
Lake Shore Temperature Controller
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

Lake Shore Temperature Controller — MCP Server

Let an AI agent read every sensor on your cryostat, check heater status, set setpoints, ramps, heater ranges and PID values, wait for the temperature to settle, and switch all heaters off on Lake Shore Cryotronics Model 335, 336 and 350 temperature controllers.

Packagelabmcp-lakeshore
InstrumentsModel 335 (2 inputs, 2 outputs), Model 336 (4 inputs, 4 outputs), Model 350 (4 inputs, 4 outputs)
InterfacesUSB (virtual COM port), Ethernet (336 and 350, TCP port 7777), IEEE-488 (GPIB via VISA)
ProtocolLake Shore ASCII commands, chapter 6 of the Model 336 (rev. 2.3), Model 335 (rev. 1.6) and Model 350 (rev. 1.7) user's manuals
Status🧪 simulated: tested against a wire-level simulator with a thermal model, not yet verified on hardware. Report a hardware test

Try it without hardware

uvx labmcp-lakeshore --simulate --check

uvx labmcp-lakeshore --simulate --option sim_model=350 --option sim_speed=20 --check

The simulator models a small cryostat at 4.2 K: a stage (inputs A diode and C Cernox-like, heated by output 1) and a sample (input B Pt-100, heated by output 2), with Lake Shore's PID law and setpoint ramping. sim_speed makes simulated time run faster than real time.

Connect your controller

The model is detected from *IDN?; other Lake Shore models (325, 331, 340, 372, ...) are refused.

  1. Pick the interface in the controller's Interface menu (only one remote interface is active at a time).
  2. USB: install the Lake Shore USB driver (Windows Update, or lakeshore.com). The port runs at a fixed 57600 baud, 7 data bits, odd parity, 1 stop bit; the server sets this automatically.
  3. Ethernet (336, 350): configure the IP address on the front panel; the command port is TCP 7777 (two connections at most).
  4. Test the connection:
   uvx labmcp-lakeshore --address /dev/ttyACM0 --check          # Linux

uvx labmcp-lakeshore --address /dev/tty.usbmodemXXXX --check # macOS uvx labmcp-lakeshore --address COM5 --check # Windows uvx labmcp-lakeshore --address tcp://192.168.1.40:7777 --check uvx labmcp-lakeshore --address GPIB0::12::INSTR --check

Add to your MCP client

Claude Code

claude mcp add cryostat -- uvx labmcp-lakeshore --address tcp://192.168.1.40:7777

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "cryostat": { "command": "uvx", "args": ["labmcp-lakeshore", "--address", "tcp://192.168.1.40:7777"] } } }

Add --read-only to allow reading temperatures and heater status but block setpoint, ramp, range and PID changes (all_heaters_off stays available). For other clients, generate the snippet with uvx labmcp config lakeshore --address tcp://192.168.1.40:7777 --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
all_heaters_off🛑 safetyTurn every output off (heater range 0 on outputs 1-4), like the front-panel All Off key, and stop any running wait. Reports the read-back range of each output and all_off.
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_heater_status👁 readReport each output's control mode and input, heater range, output %, setpoint (and in kelvin), ramp state, PID values and heater errors (open/short). Reading a heater error clears it on the controller.
read_temperatures👁 readRead every (or the selected) sensor input: kelvin, raw sensor units, sensor type, input name and decoded reading status (invalid, under/overrange). Disabled inputs are listed with null readings.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
set_heater_range⚠️ hazardSet an output's heater range (each step is ~10x more power). Anything above 0 lets the output heat: in closed loop as the PID demands, in open loop at the front-panel manual output. Refused above max_heater_range, or if the setpoint already programmed on a closed-loop, zone or warm-up output is above max_setpoint_k. Start with the lowest range that can reach the setpoint.
set_pid🎛 controlSet the P, I and D values of an output's control loop (Lake Shore conventions).
set_ramp🎛 controlTurn setpoint ramping on or off for an output's control loop and set the rate. With ramping on, the next setpoint change moves the setpoint gradually - gentler on samples and wiring.
set_setpoint⚠️ hazardSet the control setpoint of an output's loop in kelvin. If setpoint ramping is on, the setpoint moves toward the new value at the ramp rate. Heating only happens if the output is in closed-loop mode and its heater range is not off. Refused above max_setpoint_k.
wait_for_stable_temperature👁 readWait until the control input of output has stayed within tolerance_k of the setpoint (and the setpoint is no longer ramping) for stable_for_s, or until timeout_s. Returns whether it stabilised, the final temperature and a downsampled trace. Changes nothing.

get_connection_info, get_command_log and reconnect are built into every LabMCP server.

Safety limits

LimitDefaultMeaning
max_setpoint_k325 KHighest setpoint set_setpoint accepts (room temperature plus margin). set_heater_range also reads back the setpoint of a closed-loop, zone or warm-up output before letting it heat, so a higher setpoint entered on the front panel is refused too (as is a setpoint in sensor units, which cannot be checked). Raise it only if your stage, wiring and sensors are rated higher
max_heater_range3Highest heater range index. On the 335/336 3 = High (full power); on the 350 ranges go 1-5 in decade steps, so 3 is 1/100 of full power
max_wait_s3600 sLongest wait_for_stable_temperature call

Override at launch: --limit max_setpoint_k=420 --limit max_heater_range=2.

Example prompts

  • "Read all the temperatures and tell me if any sensor has an error."
  • "Ramp output 1 to 77 K at 2 K/min on the medium range, then wait until input A has been within 50 mK for 5 minutes."
  • "Step the sample from 10 K to 300 K in 10 K steps and tell me when each step is stable." (with max_setpoint_k high enough)
  • "What are the PID settings on loop 1? Reduce P to 30 and keep I and D."
  • "Something's wrong - turn all heaters off."

Notes

  • Setting a setpoint does not start heating; the heater range does. With a range above 0 an output heats as its PID loop demands (closed loop) or at the manual output (open loop). Output modes and control inputs are configured on the front panel; the server does not change them, since pointing a loop at the wrong sensor can cause a thermal runaway.
  • Setpoints are always given in kelvin. SETP uses the preferred units of the loop's control input: the server converts for Celsius and refuses when the input is set to sensor units.
  • Every command is followed by *ESR?; command (CME) and execution (EXE) errors are reported instead of being ignored. The server leaves at least 50 ms between messages, as the manuals require (--option min_interval_s=).
  • get_heater_status reads HTRST?, which clears a latched heater open/short error on the controller.
  • wait_for_stable_temperature needs the setpoint to have stopped ramping (RAMPST?) as well as the temperature to be in tolerance. all_heaters_off stops a running wait.
  • all_heaters_off sends RANGE n,0 to every output and reads it back, like the front-panel All Off key. Every output is tried even if another fails; all_off is true only when every output read back as off. It does not change setpoints or output modes. Consider also setting a hardware temperature limit (TLIMIT, front panel) as a last line of defence.
  • The 3062 scanner option (inputs D1-D5), zone tables, autotune, curves, alarms and relays are not exposed. The Model 372 AC resistance bridge was not verified and is refused at connect time.

Hardware verification

ModelFirmwareInterfaceVerified byDate
*none yet: be the first*