原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚 登录

Mettler Toledo Balance

作者:K-Dense-AI版本 0.1.3i★ 32 (整个仓库的星标)i在你的电脑上运行代码仓库 ↗
注册名称io.github.K-Dense-AI/labmcp-mettler-toledo

安装方法

能做什么

MCP server for Mettler Toledo laboratory balances (MT-SICS): weigh, tare, zero, log drift, adjust.

作者提供的原文

  • 连接方式 在你的电脑上运行
  • 账号或密钥 无需密钥
  • 分类 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度11/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度7/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分19/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Mettler Toledo Balance。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-mettler-toledo.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Mettler Toledo Balance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-mettler-toledo": { "command": "uvx", "args": [ "labmcp-mettler-toledo" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Mettler Toledo Balance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "labmcp-mettler-toledo": {
          "command": "uvx",
          "args": [
            "labmcp-mettler-toledo"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 Mettler Toledo Balance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Mettler Toledo Balance,或回答中出现 Mettler Toledo Balance 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Mettler Toledo Balance

Mettler Toledo Balance 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Mettler Toledo Balance 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Mettler Toledo Balance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-mettler-toledo -- uvx labmcp-mettler-toledo 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Mettler Toledo Balance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user labmcp-mettler-toledo -- uvx labmcp-mettler-toledo
  4. 在 Claude Code 中输入 /mcp

    应能看到 Mettler Toledo Balance 在列表中并显示已连接

  5. 试一试

    用 Mettler Toledo Balance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Mettler Toledo Balance,或回答中出现 Mettler Toledo Balance 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Mettler Toledo Balance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-mettler-toledo": { "command": "uvx", "args": [ "labmcp-mettler-toledo" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Mettler Toledo Balance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Mettler Toledo Balance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Mettler Toledo Balance,或回答中出现 Mettler Toledo Balance 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Mettler Toledo Balance,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-mettler-toledo": { "type": "stdio", "command": "uvx", "args": [ "labmcp-mettler-toledo" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Mettler Toledo Balance 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Mettler Toledo Balance 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Mettler Toledo Balance,或回答中出现 Mettler Toledo Balance 的工具名称,就表示连接成功

4 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Mettler Toledo Balance 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user labmcp-mettler-toledo -- uvx labmcp-mettler-toledo

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-mettler-toledo": {
      "command": "uvx",
      "args": [
        "labmcp-mettler-toledo"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-mettler-toledo": {
      "command": "uvx",
      "args": [
        "labmcp-mettler-toledo"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-mettler-toledo": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-mettler-toledo"
      ]
    }
  }
}

需要你填写的值

  • LABMCP_ADDRESS env
    仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025
    查看英文原文Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    设置为 1 以使用内置模拟器(无需硬件)。
    查看英文原文Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    设置为 1 可禁用所有会更改状态的工具。
    查看英文原文Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    安全限制覆盖值,例如 max_temperature_c=80。
    查看英文原文Safety limit overrides, e.g. max_temperature_c=80

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

GitHub 星标i
32 (整个仓库的星标)
该仓库包含多个 MCP 条目,星标在排名中只计算一次
每周下载量i
44/周
许可证i
Apache-2.0
连接方式
在你的电脑上运行
最新版本i
0.1.3
分类i
其他
发布到注册中心i
2026年9月27日
代码最后更新i
2026年9月27日
作者
K-Dense-AI
软件包
pypi: labmcp-mettler-toledo
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月20日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于2个月前

  • ✓ 通过

    有许可证

    使用 Apache-2.0

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 labmcp-mettler-toledo@0.1.3 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-mettler-toledo.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-mettler-toledo)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20815 个服务器的 96%
  • 发布到注册中心的时间比此分类中其他 20815 个服务器的 45% 更新
  • 基础检查结果等于或优于此分类中其他 20815 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Mettler Toledo Balance 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于2个月前,最新版本(0.1.3)于2个月前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万4天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92762个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582414个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
Mettler Toledo Balance
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

Mettler Toledo Balance — MCP Server

Let an AI agent weigh samples, tare containers, log drift and evaporation, run internal adjustments and drive the draft shield on Mettler Toledo balances through the open MT-SICS interface command set.

Packagelabmcp-mettler-toledo
InstrumentsExcellence XPR/XSR, XP/XS, XA/XE, MS/ML, NewClassic ME/MS, and other MT-SICS balances and weighing terminals
InterfacesRS-232, USB (virtual COM port), Ethernet (XPR/XSR, or any serial-to-Ethernet adapter)
ProtocolMT-SICS levels 0–2 (reference manual)
Status🧪 simulated: tested against a wire-level MT-SICS simulator, not yet verified on hardware. Report a hardware test

Try it without hardware

uvx labmcp-mettler-toledo --simulate --check

Connect your balance

  1. Balance setup: in the balance menu, set the interface (RS232/USB/Ethernet) to MT-SICS (sometimes called "Host" or "Dialog"). Factory settings are 9600 baud, 8 data bits, no parity, 1 stop bit, Xon/Xoff.
  2. Find the port: uvx labmcp ports
  3. Test the connection:
   uvx labmcp-mettler-toledo --address /dev/ttyUSB0 --check          # Linux

uvx labmcp-mettler-toledo --address /dev/tty.usbserial-XXXX --check # macOS uvx labmcp-mettler-toledo --address COM4 --check # Windows uvx labmcp-mettler-toledo --address tcp://192.168.1.60:8001 --check # Ethernet

   Non-default settings go in the address: `serial://COM4?baudrate=19200&xonxoff=false`.

Add to your MCP client

Claude Code

claude mcp add balance -- uvx labmcp-mettler-toledo --address /dev/ttyUSB0

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "balance": { "command": "uvx", "args": ["labmcp-mettler-toledo", "--address", "/dev/ttyUSB0"] } } }

Add --read-only to allow weighing but block taring, zeroing and door movement. For other clients, generate the snippet with uvx labmcp config mettler-toledo --address /dev/ttyUSB0 --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
clear_tare🎛 controlClear the tare memory (tare = 0).
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_draft_shield👁 readReport the position of the motorised draft-shield doors (Excellence/XPR balances only).
get_tare👁 readReturn the weight currently stored in the tare memory.
log_weight_series👁 readRecord a series of immediate (unfiltered) readings to monitor drift, evaporation, moisture uptake or stabilisation. Returns every reading plus summary statistics.
read_temperature👁 readRead the balance's internal temperature probe(s) in °C (MT-SICS M28, if supported).
read_weight👁 readRead the current net weight from the balance.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
reset_balance🛑 safetyAbort whatever the balance is doing (an adjustment, a repeating weight stream, a pending command) and reset it to its power-on state without zeroing (MT-SICS @). Clears the tare. Motorised draft-shield doors have their own obstruction detection and reverse if blocked.
run_internal_adjustment🎛 controlAdjust (calibrate) the balance with its built-in reference weight (MT-SICS C3). The pan must be empty and the balance undisturbed. Takes roughly 1-3 minutes.
set_draft_shield⚠️ hazardOpen or close the motorised draft-shield doors. Make sure nothing (and no one's fingers) is in the way of the doors.
set_tare_preset🎛 controlPreset a known tare weight (e.g. a container weighed earlier).
show_message🎛 controlShow a short message on the balance display (e.g. 'Add sample 3'). Use show_weight_display to return to the normal weight display.
show_weight_display🎛 controlSwitch the balance display back to showing the weight.
tare🎛 controlTare the balance: store the current load (e.g. an empty container) as the tare weight. Returns the stored tare weight.
zero🎛 controlZero the balance with the current load. Also clears the tare memory.

get_connection_info, get_command_log and reconnect are built into every LabMCP server.

Safety limits

LimitDefaultMeaning
max_series_duration_s600 sLongest weight-logging series an agent may start

Override at launch: --limit max_series_duration_s=3600. Whatever the limit says, a single series is capped at one hour (the tool's time limit).

Example prompts

  • "Tare the balance, then tell me when the reading is stable after I add the sample."
  • "Log the weight every 10 s for 5 minutes and tell me the evaporation rate in mg/min."
  • "Weigh out ~250 mg: tell me how much more to add, reading every few seconds, until I'm within ±2 mg."
  • "Run an internal adjustment and confirm it succeeded before we start the calibration curve."

Notes

  • read_weight(stable=True) sends S, which waits for stability. If the balance cannot settle (draughts, vibration), it returns S I. The server reports this as an error, so retry or use stable=false.
  • Weights are in the balance's unit 1 (normally grams). Units shown on the display (unit 2) don't affect the interface.
  • Draft-shield (WS) and temperature (M28) commands exist only on balances with that hardware; other balances answer ES/L, which the server reports clearly.
  • run_internal_adjustment waits for the final C3 A without blocking the connection: reset_balance aborts a running adjustment, and other commands are refused until it ends (their replies would be mixed up with the result).
  • Before each command the server discards anything the balance sent unasked (e.g. a print-key transmission) and checks that the reply belongs to the command, so one late reply cannot shift every later reply by one.
  • show_message accepts printable ASCII only, and set_tare_preset only a unit symbol: a line break would otherwise reach the balance as a second MT-SICS command.

Hardware verification

ModelFirmwareInterfaceVerified byDate
*none yet: be the first*