World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Opentrons OT-2 and Flex liquid-handling robots (HTTP API).
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 Opentrons OT-2 / Flex。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-opentrons.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server Opentrons OT-2 / Flex,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-opentrons": { "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Opentrons OT-2 / Flex 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-opentrons": {
"command": "uvx",
"args": [
"labmcp-opentrons"
]
}
}
}用 Opentrons OT-2 / Flex 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 Opentrons OT-2 / Flex,或回答中出现 Opentrons OT-2 / Flex 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 Opentrons OT-2 / Flex
Opentrons OT-2 / Flex 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 Opentrons OT-2 / Flex 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server Opentrons OT-2 / Flex,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Opentrons OT-2 / Flex 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons应能看到 Opentrons OT-2 / Flex 在列表中并显示已连接
用 Opentrons OT-2 / Flex 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 Opentrons OT-2 / Flex,或回答中出现 Opentrons OT-2 / Flex 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server Opentrons OT-2 / Flex,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-opentrons": { "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Opentrons OT-2 / Flex 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Opentrons OT-2 / Flex 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 Opentrons OT-2 / Flex,或回答中出现 Opentrons OT-2 / Flex 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server Opentrons OT-2 / Flex,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-opentrons": { "type": "stdio", "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Opentrons OT-2 / Flex 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Opentrons OT-2 / Flex 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 Opentrons OT-2 / Flex,或回答中出现 Opentrons OT-2 / Flex 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentronsClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-opentrons": {
"command": "uvx",
"args": [
"labmcp-opentrons"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-opentrons": {
"command": "uvx",
"args": [
"labmcp-opentrons"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-opentrons": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-opentrons"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库
代码最后更新于2个月前
使用 Apache-2.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 labmcp-opentrons@0.1.3 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-opentrons)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于2个月前,最新版本(0.1.3)于2个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 Opentrons OT-2 / Flex | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI agent upload and check protocols, review the deck layout with you, start, pause, stop and resume runs, follow their progress, and read pipettes and modules on Opentrons Flex and OT-2 liquid-handling robots through the robot's documented HTTP API.
| Package | labmcp-opentrons |
| Instruments | Opentrons Flex, Opentrons OT-2 (robot software 5.1 or newer) |
| Interfaces | Ethernet, Wi-Fi, USB (network over USB) |
| Protocol | Opentrons robot-server HTTP API on port 31950, Opentrons-Version: 3 (HTTP API guide, robot-server source; every robot also serves its spec at http:// :31950/openapi.json and /redoc) |
| Status | 🧪 simulated: tested against an in-memory robot-server simulator, not yet verified on hardware. Report a hardware test |
Why this server rather than a generic HTTP wrapper: it refuses to start a run unless the robot's own protocol analysis passed, the user has confirmed the deck, the door is closed, the E-stop is released and module setpoints are within your limits. It exposes no single-move pipetting commands, keeps pause and stop available even in read-only mode, and records every HTTP request in the command log.
uvx labmcp-opentrons --simulate --check
uvx labmcp-opentrons --simulate --option sim_model=ot2 --check # simulate an OT-2
The simulator runs protocols in memory: Python protocols are compiled and scanned for labware, pipettes, modules and steps, runs go through the real status lifecycle, and module temperatures respond to the protocol.
169.254.x.x). uvx labmcp-opentrons --address 192.168.1.20 --check
uvx labmcp-opentrons --address http://ot2-lab.local:31950 --check
`--check` prints the robot's name, model, software and firmware versions.
--option access_token= .Claude Code
claude mcp add opentrons -- uvx labmcp-opentrons --address 192.168.1.20
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)
{
"mcpServers": { "opentrons": { "command": "uvx", "args": ["labmcp-opentrons", "--address", "192.168.1.20"] } } }
Add --read-only to let the agent monitor the robot (status, runs, protocols, modules) while blocking uploads, runs, homing and lights. pause_run, stop_run and deactivate_modules stay available. For other clients, generate the snippet with uvx labmcp config opentrons --address 192.168.1.20 --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
deactivate_modules | 🛑 safety | Switch attached modules off: stop heating/cooling (Temperature Module, Thermocycler block and lid, Heater-Shaker heater), stop shaking, and lower Magnetic Module magnets. Only possible when no run is in progress: stop the run first. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_protocol | 👁 read | Show a stored protocol's analysis: whether it is ready to run, analysis errors, the deck layout it expects (labware and modules per slot, pipettes per mount, liquids), the number of steps and the highest module temperature / shake speed it requests. Review this with the user before start_run. |
get_robot_status | 👁 read | Report the robot's name, model (Flex/OT-2), software and firmware versions, lights, door and E-stop state, and the current run. Call this first to check the robot is ready. |
get_run_status | 👁 read | Report a run's status, the step it is on, progress, recent steps and any errors, plus advice on what to do next (e.g. when the run is waiting for error recovery). |
home_robot | ⚠️ hazard | Home all axes of the robot (the gantry and pipettes move to their home positions). Refused while a run is active. Make sure nothing is in the robot's path and the door is closed. |
list_instruments | 👁 read | List attached pipettes (and the Flex gripper): mount, name, channels, volume range, and whether a tip is detected and calibration data exists. |
list_modules | 👁 read | List attached modules (Temperature Module, Heater-Shaker, Thermocycler, Magnetic Module, Absorbance Plate Reader, ...) with live temperatures, targets, shake speed and status. |
list_protocols | 👁 read | List protocols stored on the robot (newest last) with their analysis status and result. |
list_runs | 👁 read | List recent protocol runs, newest first, with their status. |
pause_run | 🛑 safety | Pause a running protocol. The robot finishes its current step and then holds; resume_run continues it. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
resume_run | ⚠️ hazard | Resume a paused run (the robot starts moving again), or leave error recovery. Refused while the door is open. For a run awaiting recovery, error_recovery must be given. |
set_lights | 🎛 control | Turn the robot's deck (rail) lights on or off. |
start_run | ⚠️ hazard | Create a run of an analyzed protocol and start it: the robot begins moving and pipetting. Refused unless the protocol's analysis completed without errors, its module setpoints are within the safety limits, no other run is active, the door is closed and the E-stop is released. |
stop_run | 🛑 safety | Stop (cancel) a run immediately. A stopped run cannot be resumed; the robot homes and drops any attached tips into the trash. Use this whenever something looks wrong. |
upload_protocol | 🎛 control | Upload a protocol file (plus optional custom labware) to the robot. The robot analyzes it (simulates it) and this tool returns the analysis: errors, deck layout and whether it is ready to run. Uploading does not move the robot. Uploading identical files returns the existing protocol. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server. get_command_log shows every HTTP request sent to the robot and its reply.
| Limit | Default | Meaning |
|---|---|---|
max_module_temperature_c | 110 °C | Highest temperature (Temperature Module, Thermocycler block or lid, Heater-Shaker) a protocol may request; start_run refuses protocols above it |
max_shake_speed_rpm | 3000 rpm | Fastest Heater-Shaker speed a protocol may request |
The defaults are the hardware maxima. Tighten them for heat-sensitive plastics or samples: --limit max_module_temperature_c=70 --limit max_shake_speed_rpm=1500. The check reads the setpoints from the robot's analysis of the protocol (every celsius and rpm value in module commands, including thermocycler profiles).
Other safety interlocks built into start_run:
ok (pending, failed or parameter-required analyses are refused, and the errors are shown);deck_confirmed=true is required, which the agent should only pass after you confirmed the deck matches the layout from get_protocol;~/protocols/serial_dilution.py to the Flex and tell me whether the analysis passed. What labware do I need where?"POST /runs/{id}/commands), because without full deck state these can crash pipettes into labware. That may come later behind stricter checks.labware.set_offset(...)).awaiting-recovery. resume_run(error_recovery="continue") continues from the robot's actual state and skips the failed step; "assume_false_positive" treats the failure as a false alarm. Only use either after someone has checked the robot.deactivate_modules sends the robot's stateless deactivate commands (POST /commands), which the robot only accepts when no run is in progress.list_instruments uses GET /instruments, which the robot fully supports on Flex; on an OT-2 it returns pipettes with less detail (no calibration data).Opentrons-Version: 3 header, as in Opentrons' integration examples. Override with --option api_version=4 if needed.| Model | Robot software | Interface | Verified by | Date |
|---|---|---|---|---|
| *none yet: be the first* |