World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Pfeiffer Vacuum TPG 361/362/366 and TPG 261/262 gauge controllers.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 Pfeiffer Vacuum Gauge Controller。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-pfeiffer-tpg.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server Pfeiffer Vacuum Gauge Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-pfeiffer-tpg": { "command": "uvx", "args": [ "labmcp-pfeiffer-tpg" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Pfeiffer Vacuum Gauge Controller 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-pfeiffer-tpg": {
"command": "uvx",
"args": [
"labmcp-pfeiffer-tpg"
]
}
}
}用 Pfeiffer Vacuum Gauge Controller 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 Pfeiffer Vacuum Gauge Controller,或回答中出现 Pfeiffer Vacuum Gauge Controller 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 Pfeiffer Vacuum Gauge Controller
Pfeiffer Vacuum Gauge Controller 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 Pfeiffer Vacuum Gauge Controller 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server Pfeiffer Vacuum Gauge Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-pfeiffer-tpg -- uvx labmcp-pfeiffer-tpg 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Pfeiffer Vacuum Gauge Controller 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user labmcp-pfeiffer-tpg -- uvx labmcp-pfeiffer-tpg应能看到 Pfeiffer Vacuum Gauge Controller 在列表中并显示已连接
用 Pfeiffer Vacuum Gauge Controller 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 Pfeiffer Vacuum Gauge Controller,或回答中出现 Pfeiffer Vacuum Gauge Controller 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server Pfeiffer Vacuum Gauge Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-pfeiffer-tpg": { "command": "uvx", "args": [ "labmcp-pfeiffer-tpg" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Pfeiffer Vacuum Gauge Controller 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Pfeiffer Vacuum Gauge Controller 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 Pfeiffer Vacuum Gauge Controller,或回答中出现 Pfeiffer Vacuum Gauge Controller 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server Pfeiffer Vacuum Gauge Controller,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-pfeiffer-tpg": { "type": "stdio", "command": "uvx", "args": [ "labmcp-pfeiffer-tpg" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Pfeiffer Vacuum Gauge Controller 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 Pfeiffer Vacuum Gauge Controller 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 Pfeiffer Vacuum Gauge Controller,或回答中出现 Pfeiffer Vacuum Gauge Controller 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user labmcp-pfeiffer-tpg -- uvx labmcp-pfeiffer-tpgClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-pfeiffer-tpg": {
"command": "uvx",
"args": [
"labmcp-pfeiffer-tpg"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-pfeiffer-tpg": {
"command": "uvx",
"args": [
"labmcp-pfeiffer-tpg"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-pfeiffer-tpg": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-pfeiffer-tpg"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库
代码最后更新于2个月前
使用 Apache-2.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 labmcp-pfeiffer-tpg@0.1.2 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-pfeiffer-tpg)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于2个月前,最新版本(0.1.2)于2个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 Pfeiffer Vacuum Gauge Controller | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI agent read and log chamber and foreline pressures, identify the connected gauges, change the pressure unit and switch ionisation gauges on and off (with a pressure check) on Pfeiffer Vacuum TPG total-pressure gauge controllers.
| Package | labmcp-pfeiffer-tpg |
| Instruments | TPG 361 SingleGauge, TPG 362 DualGauge, TPG 366 MaxiGauge (ActiveLine gauges); TPG 261 / TPG 262 (compact gauges) |
| Interfaces | TPG 36x: USB type B (virtual COM port), Ethernet (TCP port 8000); TPG 26x: RS-232 |
| Protocol | Pfeiffer mnemonics protocol, ACK/NAK + ENQ (TPG 361/362 communication protocol BG 5510 BEN, TPG 366 communication protocol BG 5511 BEN, TPG 262 operating instructions BG 805 196 BE section 5; originals in the Pfeiffer download center) |
| Status | 🧪 simulated: tested against a byte-level simulator of the protocol, not yet verified on hardware. Report a hardware test |
uvx labmcp-pfeiffer-tpg --simulate --check # TPG 362: FullRange gauge + Pirani
uvx labmcp-pfeiffer-tpg --simulate --option model=tpg366 --check # 6 channels incl. a cold cathode gauge
The simulated chamber pumps down from 8e-5 mbar towards 2e-7 mbar (10 min time constant) and the foreline sits at about 2.4e-2 mbar.
uvx labmcp-pfeiffer-tpg --address /dev/ttyUSB0 --check
uvx labmcp-pfeiffer-tpg --address COM3 --check uvx labmcp-pfeiffer-tpg --address "serial://COM3?baudrate=115200" --check uvx labmcp-pfeiffer-tpg --address tcp://192.168.1.70:8000 --check
The model is detected with `AYT` (TPG 36x); a controller that does not know `AYT` is treated as a TPG 26x. Use `--option model=tpg261` (or `tpg262`, `tpg361`, `tpg362`, `tpg366`) to be explicit.
Claude Code
claude mcp add vacuum -- uvx labmcp-pfeiffer-tpg --address tcp://192.168.1.70:8000
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)
{
"mcpServers": { "vacuum": { "command": "uvx", "args": ["labmcp-pfeiffer-tpg", "--address", "tcp://192.168.1.70:8000"] } } }
Add --read-only to allow reading and logging but block unit changes and switching gauges on (switch_gauge_off stays available). For other clients, generate the snippet with uvx labmcp config pfeiffer-tpg --address tcp://192.168.1.70:8000 --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_errors | 👁 read | Read (and clear) the controller's ERROR word: controller error, no hardware, inadmissible parameter or syntax error. An empty list means no error. |
get_gauge_types | 👁 read | List the gauge connected to each channel (TID), what kind it is, and whether it is an ionisation gauge that is currently switched on or off (SEN). |
log_pressure_series | 👁 read | Log pressures at a fixed interval (e.g. a pump-down curve, leak-up/rate-of-rise test or bake-out). Returns per-channel statistics in log-space plus a downsampled series; the full series can be written to a new CSV file (an existing file is never overwritten). Bounded by max_log_duration_s and 2 h per call. |
read_all_pressures | 👁 read | Read every channel of the controller at once (PRX), with status per channel. |
read_pressure | 👁 read | Read one gauge channel: status, pressure in the display unit and in mbar. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
set_gauge_power | ⚠️ hazard | Switch an ionisation gauge (IKR, PKR, PBR, IMR) on or off (SEN). Switching a hot or cold cathode gauge on at high pressure can burn out the filament or contaminate the gauge, so switching ON is refused unless a valid reading from this gauge or reference_channel is at or below max_switch_on_pressure_mbar. Switching off may trip setpoint relays used as interlocks. |
set_unit | 🎛 control | Change the pressure unit used on the display and interface (UNI). Readings in mbar are always included regardless of this setting. |
switch_gauge_off | 🛑 safety | Switch an ionisation gauge off (e.g. before venting, or if the pressure is rising). Always allowed. Note that setpoint relays assigned to this channel may change state. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
| Limit | Default | Meaning |
|---|---|---|
max_switch_on_pressure_mbar | 1e-2 mbar | An ionisation gauge may only be switched on when a valid reading (its own, or reference_channel) is at or below this pressure |
max_log_duration_s | 3600 s | Longest log_pressure_series an agent may start |
Override at launch: --limit max_switch_on_pressure_mbar=1e-3 --limit max_log_duration_s=7200. One log_pressure_series call logs at most 2 h (the tool's timeout); for a longer bake-out, log in consecutive calls to separate files. save_path must end in .csv and must not exist yet (an existing file is never overwritten); it is checked before logging starts.
set_gauge_power(on=True) requires a reading with status *ok* at or below max_switch_on_pressure_mbar from the gauge itself or from reference_channel on the same vacuum. An *underrange* reading from a Pirani is not accepted as proof (what the controller reports on underrange is not specified), so in a Pirani + Penning setup switch the Penning on at the controller, or use a FullRange gauge as the reference. The 1e-2 mbar default is the upper end of a typical cold cathode measuring range; check your gauge's manual and lower it for hot-filament gauges if recommended.switch_gauge_off, or set_gauge_power(on=False)) can change setpoint (switching-function) relays assigned to that channel, which may be wired to valve or pump interlocks.pressure is only filled in when the status is *ok*; raw_value is what the controller sent. Values are converted to mbar (1 Torr = 1.333224 mbar); in *V* mode no conversion is made.get_errors reads and clears it.| Model | Firmware | Interface | Verified by | Date |
|---|---|---|---|---|
| *none yet: be the first* |