timesfm
TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.
MCP server for Stanford Research Systems lock-in amplifiers (SR810/SR830, SR860/SR865A).
教 AI 做这类工作的 Skill,可与本项一起使用
TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.
Open-source intelligence for the global theater. Track everything from the corporate/private jets of the wealthy, and spy satellites, to seismic events in one unified interface. Hook an AI agent up to have it parse through data and find previously unseen correlations. The knowledge is available to…
scrape data from Google Maps. Extracts data such as the name, address, phone number, website URL, rating, reviews number, latitude and longitude, reviews,email and more for each place
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 SRS Lock-in Amplifier。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-srs-lockin.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server SRS Lock-in Amplifier,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-srs-lockin": { "command": "uvx", "args": [ "labmcp-srs-lockin" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Lock-in Amplifier 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-srs-lockin": {
"command": "uvx",
"args": [
"labmcp-srs-lockin"
]
}
}
}用 SRS Lock-in Amplifier 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 SRS Lock-in Amplifier,或回答中出现 SRS Lock-in Amplifier 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 SRS Lock-in Amplifier
SRS Lock-in Amplifier 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server SRS Lock-in Amplifier,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-srs-lockin -- uvx labmcp-srs-lockin 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Lock-in Amplifier 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user labmcp-srs-lockin -- uvx labmcp-srs-lockin应能看到 SRS Lock-in Amplifier 在列表中并显示已连接
用 SRS Lock-in Amplifier 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 SRS Lock-in Amplifier,或回答中出现 SRS Lock-in Amplifier 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server SRS Lock-in Amplifier,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-srs-lockin": { "command": "uvx", "args": [ "labmcp-srs-lockin" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Lock-in Amplifier 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 SRS Lock-in Amplifier 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 SRS Lock-in Amplifier,或回答中出现 SRS Lock-in Amplifier 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server SRS Lock-in Amplifier,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-srs-lockin": { "type": "stdio", "command": "uvx", "args": [ "labmcp-srs-lockin" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Lock-in Amplifier 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 SRS Lock-in Amplifier 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 SRS Lock-in Amplifier,或回答中出现 SRS Lock-in Amplifier 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user labmcp-srs-lockin -- uvx labmcp-srs-lockinClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-srs-lockin": {
"command": "uvx",
"args": [
"labmcp-srs-lockin"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-srs-lockin": {
"command": "uvx",
"args": [
"labmcp-srs-lockin"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-srs-lockin": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-srs-lockin"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库
代码最后更新于2个月前
使用 Apache-2.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 labmcp-srs-lockin@0.1.3 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-srs-lockin)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于2个月前,最新版本(0.1.3)于2个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:OpenSEO, Exa, Microsoft Learn MCP, Docs, COTAL actions (cotal.ai)
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Keyword research, site audits, rank tracking and AI visibility for your AI agent.
Connect AI agents to Exa for web search, content fetching, and multi-step research.
Official Microsoft Learn MCP Server – real-time, trusted docs & code samples for AI and LLMs.
cotal.ai actions: product overview, site search, build log, feedback, Cloud waitlist, updates, calls
| 本项 SRS Lock-in Amplifier | OpenSEO | Exa | Microsoft Learn MCP | Docs | COTAL actions (cotal.ai) | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 是 | 是 | 是 | 否 | 否 |
| 基础检查 | 3/3 | 5/5 | 2/4 | 4/4 | 4/4 | 4/4 |
| 许可证 | Apache-2.0 | MIT | MIT | CC-BY-4.0 | NOASSERTION | Apache-2.0 |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI agent read X/Y/R/θ, set the reference frequency, harmonic and phase, drive level, sensitivity and time constant, run auto phase/gain, and record bounded frequency sweeps on Stanford Research Systems DSP lock-in amplifiers, both the classic SR810/SR830 and the current SR860/SR865A.
| Package | labmcp-srs-lockin |
| Instruments | SR830, SR810 (SR8x0 command set); SR860, SR865A (SR86x command set) |
| Interfaces | GPIB (VISA), RS-232; SR86x also USB (USBTMC) and Ethernet (VXI-11) |
| Protocol | SRS ASCII remote commands, IEEE-488.2 style (SR830 manual ch. 5, SR810 manual, SR860 manual ch. 4, SR865A manual) |
| Status | 🧪 simulated: tested against a wire-level simulator of both command sets, not yet verified on hardware. Report a hardware test |
uvx labmcp-srs-lockin --simulate --check # SR830 simulator
uvx labmcp-srs-lockin --simulate --option model=sr860 --check # SR860 simulator
The simulated sample is a resonator (10 kHz, Q = 50) driven by the sine output, so a frequency_sweep from 9 to 11 kHz shows a resonance peak.
The model is detected from *IDN? (override with --option model=sr830|sr810|sr860|sr865a).
labmcp[visa] (included) and a VISA backend (pyvisa-py works with most USB-GPIB adapters; NI-VISA with ?backend=@ivi).OUTX; the server sends OUTX 0 automatically on serial connections and OUTX 1 on GPIB. The SR830 ends RS-232 replies with CR. For an SR86x on RS-232, pass --option model=sr860 (replies end with LF) or set the SR86x transmit terminator to CR.TCPIP0:: ::inst0::INSTR; enable VXI-11 and add your PC to the trusted IP range in the system menu). uvx labmcp-srs-lockin --address GPIB0::8::INSTR --check
uvx labmcp-srs-lockin --address /dev/ttyUSB0 --check # SR830 RS-232 uvx labmcp-srs-lockin --address "serial://COM3?baudrate=19200" --check # non-default baud uvx labmcp-srs-lockin --address TCPIP0::192.168.1.20::inst0::INSTR --check # SR86x LAN
Use `--option interface=gpib` if you reach an SR830's GPIB port through a raw TCP adapter.
Claude Code
claude mcp add lockin -- uvx labmcp-srs-lockin --address GPIB0::8::INSTR
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)
{
"mcpServers": { "lockin": { "command": "uvx", "args": ["labmcp-srs-lockin", "--address", "GPIB0::8::INSTR"] } } }
Add --read-only to allow reading outputs and settings but block every setting change and the sine-output drive. For other clients, generate the snippet with uvx labmcp config srs-lockin --address GPIB0::8::INSTR --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
auto_gain | 🎛 control | Pick the sensitivity automatically for the present signal (SR830 AGAN / SR86x ASCL). On the SR830 AGAN does nothing when the time constant is longer than 1 s. |
auto_phase | 🎛 control | Run Auto Phase (APHS): shift the reference phase so that Y ≈ 0 and X ≈ R. The outputs then need several time constants to settle. Does nothing if the phase is unstable. |
auto_range | 🎛 control | Optimise the input stage for the present signal: SR830 Auto Reserve (ARSV) or SR86x Auto Range of the voltage input range (ARNG). |
frequency_sweep | ⚠️ hazard | Step the internal reference (and SINE OUT drive) from start_hz to stop_hz, waiting for the output filter to settle at each point, and record X/Y/R/θ vs frequency - e.g. a resonance or transfer-function measurement. The drive amplitude stays at its present value. Needs the internal reference. The estimated duration must be within max_sweep_duration_s; set_amplitude_minimum stops a running sweep. save_path must be a new .csv file. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_settings | 👁 read | Report the reference (source, frequency, harmonic, phase), sine output, sensitivity, time constant/slope (with the 99 % settling time), and input configuration. |
read_outputs | 👁 read | Read X, Y, R and θ as one coherent snapshot (SNAP?), with the reference frequency, sensitivity, fraction of full scale and any overloads latched since the last reading. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
set_amplitude | ⚠️ hazard | Set the SINE OUT amplitude (V rms), which drives the sample or excitation circuit. Refused above the max_amplitude_v safety limit. Tell the user the new drive level first. |
set_amplitude_minimum | 🛑 safety | Turn the sine output down to the instrument minimum (the lock-in's closest thing to 'output off') and stop any running frequency sweep. SR810/SR830: 4 mV rms (it cannot go to zero - disconnect the cable if the sample must see no drive). SR86x: 1 nV rms and DC level 0 V. |
set_input | 🎛 control | Configure the signal input: A / A-B / current, AC or DC coupling, shield float/ground and (SR86x) the voltage input range. Use DC coupling below ~160 mHz. Omitted parameters are left unchanged. |
set_reference | 🎛 control | Set the reference: source (internal/external), internal frequency, detection harmonic and phase shift. Omitted parameters are left unchanged. Changing the frequency also changes the frequency of the SINE OUT drive (at the current amplitude). |
set_sensitivity | 🎛 control | Set the sensitivity (full-scale range). The smallest available range that is at least full_scale is chosen, so a signal of that size does not overload. On SR810/SR830 the dynamic reserve can be set at the same time. |
set_time_constant | 🎛 control | Set the output filter time constant (nearest available value), and optionally the filter slope and synchronous filter. The SR830 may raise a too-short time constant to its minimum for the current slope/reserve; the returned settings show the value actually used. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
| Limit | Default | Meaning |
|---|---|---|
max_amplitude_v | 1.0 V | Largest sine-output amplitude (V rms) set_amplitude may set; a sweep also refuses to run if the present amplitude is above it |
max_sweep_duration_s | 600 s | Longest estimated frequency sweep (points × settle time) an agent may start |
Override at launch: --limit max_amplitude_v=0.1 --limit max_sweep_duration_s=1800.
set_amplitude checks max_amplitude_v; set_amplitude_minimum is the closest thing to "output off": the SR810/SR830 cannot go below 4 mV rms, so disconnect the cable if the sample must see no drive. On the SR86x it sets 1 nV rms and a 0 V DC level (SOFF). The SR830 powers up and resets (*RST) to 1.000 V rms.*ESR?; if the lock-in flags an execution error (parameter out of range, e.g. FREQ in external-reference mode) or an illegal command, the tool reports it instead of silently continuing.set_sensitivity picks the smallest range that is at least the requested full scale (never a smaller one, which would overload). set_time_constant picks the nearest available value; the SR830 may raise it to the minimum allowed for the slope/reserve, and the returned settings show the value actually used.read_outputs returns unit = V for voltage inputs and A for the current input (1 V ↔ 1 µA sensitivity mapping from the manuals). The SR830 manual (SR530-compatibility QX/QY commands, ch. 5) states that outputs are returned in amps when the current input is selected; the SR86x manual does not say explicitly — please report what your instrument returns.overloads comes from LIAS?, whose bits are latched since the last read; the first reading after a transient may show an overload that has already cleared.frequency_sweep waits the manual's 99 % settling time at each point (5/7/9/10 time constants for 6/12/18/24 dB/oct) unless settle_time_constants is given, and restores the starting frequency afterwards. Calling set_amplitude_minimum stops a running sweep at the next point (also one that is still reading its settings). One sweep can take at most 3640 s (the tool's timeout minus a margin) whatever max_sweep_duration_s is: longer estimates are refused, and a sweep running slower than estimated stops early and returns the points measured so far (completed: false). save_path must end in .csv and must not exist yet (an existing file is never overwritten); it is checked before the sweep starts.set_amplitude_minimum tries both the amplitude and (SR86x) the DC level even if one of them fails, then reports every failure.auto_gain maps to AGAN (SR830) or ASCL (SR86x); auto_range maps to ARSV (SR830 auto reserve) or ARNG (SR86x auto input range). SR830 AGAN does nothing when the time constant is above 1 s.--option model=... lets you try a compatible model at your own risk.| Model | Firmware | Interface | Verified by | Date |
|---|---|---|---|---|
| *none yet: be the first* |