World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for SRS RGA100/200/300 residual gas analyzers.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 7/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 7/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 SRS Residual Gas Analyzer。按照 https://mcp.popnx.com/i/k-dense-ai-labmcp-srs-rga.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server SRS Residual Gas Analyzer,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Residual Gas Analyzer 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}用 SRS Residual Gas Analyzer 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 SRS Residual Gas Analyzer,或回答中出现 SRS Residual Gas Analyzer 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 SRS Residual Gas Analyzer
SRS Residual Gas Analyzer 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 SRS Residual Gas Analyzer 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server SRS Residual Gas Analyzer,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Residual Gas Analyzer 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga应能看到 SRS Residual Gas Analyzer 在列表中并显示已连接
用 SRS Residual Gas Analyzer 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 SRS Residual Gas Analyzer,或回答中出现 SRS Residual Gas Analyzer 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server SRS Residual Gas Analyzer,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Residual Gas Analyzer 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 SRS Residual Gas Analyzer 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 SRS Residual Gas Analyzer,或回答中出现 SRS Residual Gas Analyzer 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server SRS Residual Gas Analyzer,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "labmcp-srs-rga": { "type": "stdio", "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 SRS Residual Gas Analyzer 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 SRS Residual Gas Analyzer 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 SRS Residual Gas Analyzer,或回答中出现 SRS Residual Gas Analyzer 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
LABMCP_ADDRESS 仪器地址,例如 serial:///dev/ttyUSB0 或 tcp://192.168.1.50:5025 LABMCP_SIMULATE 设置为 1 以使用内置模拟器(无需硬件)。 LABMCP_READ_ONLY 设置为 1 可禁用所有会更改状态的工具。 LABMCP_LIMITS 安全限制覆盖值,例如 max_temperature_c=80。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rgaClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-srs-rga": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 K-Dense-AI 验证,该账户拥有此仓库
代码最后更新于2个月前
使用 Apache-2.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 labmcp-srs-rga@0.1.1 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-srs-rga)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于2个月前,最新版本(0.1.1)于2个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 SRS Residual Gas Analyzer | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI agent read the residual gas composition of a vacuum system with a Stanford Research Systems RGA100, RGA200 or RGA300 quadrupole mass spectrometer: partial pressures at chosen m/z, analog and histogram spectra, total pressure, helium leak checks and a first-pass identification of the gases (water, hydrogen, nitrogen/CO, oxygen, argon, CO2, hydrocarbons). The filament, the electron multiplier (CDEM) and the ionizer degas are protected by server-side pressure interlocks.
| Package | labmcp-srs-rga |
| Instruments | SRS RGA100 (1-100 amu), RGA200 (1-200 amu), RGA300 (1-300 amu), with or without the CDEM option (01) |
| Interfaces | RS-232 (fixed 28,800 baud, 8N1, RTS/CTS), TCP via a serial-to-Ethernet adapter or the SRS RGA Ethernet adapter |
| Protocol | SRS RGA command set: Operating Manual and Programming Reference, Models RGA100/200/300, Rev. 1.9, chapter 6 "Programming the RGA Head" |
| Status | 🧪 simulated: tested against a wire-level simulator, not yet verified on hardware. Report a hardware test |
uvx labmcp-srs-rga --simulate --check
uvx labmcp-srs-rga --simulate --option scenario=helium_leak # He pulses every 20 s for leak_check uvx labmcp-srs-rga --simulate --option scenario=overpressure # a growing leak trips the filament
The simulator is an RGA200 with a CDEM on an unbaked chamber at ~1e-7 Torr (mostly water, then H2, N2/CO, CO2).
uvx labmcp ports uvx labmcp-srs-rga --address /dev/ttyUSB0 --check # Linux
uvx labmcp-srs-rga --address /dev/tty.usbserial-XXXX --check # macOS uvx labmcp-srs-rga --address COM3 --check # Windows uvx labmcp-srs-rga --address tcp://192.168.1.50:4001 --check # raw-TCP serial-to-Ethernet adapter uvx labmcp-srs-rga --address tcp://192.168.1.50:818 --option user=admin --option password=admin --check # SRS RGA Ethernet adapter
On connection the server sends `ID?` and `IN0` (clear the RGA's buffers and run its hardware self-check). It does not switch anything on.
Claude Code
claude mcp add rga -- uvx labmcp-srs-rga --address /dev/ttyUSB0
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, ...)
{
"mcpServers": { "rga": { "command": "uvx", "args": ["labmcp-srs-rga", "--address", "/dev/ttyUSB0"] } } }
Add --read-only to allow measurements but block switching the filament/CDEM, degassing, calibration and settings changes (the off switches stay available). For other clients, generate the snippet with uvx labmcp config srs-rga --address /dev/ttyUSB0 --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
all_off | 🛑 safety | Put the RGA in a safe state: abort any degas, CDEM off (HV0), filament off (FL0) and quadrupole RF/DC off (MR0). Use when finished, before venting, or if anything looks wrong. It interrupts a running scan or leak check, and every step is attempted even if an earlier one fails. |
analog_scan | 👁 read | Record an analog mass spectrum (SC1): the quadrupole steps through the mass range and the full peak shapes are returned (downsampled) with a peak list, the total pressure measured at the end of the scan, and optionally the full data as CSV. Use it to check peak positions and to survey unknown gases. Duration depends on the noise floor (e.g. 126 ms/amu at NF4). An existing save_path file is never overwritten. |
calibrate | ⚠️ hazard | Calibrate the detector: zero (CA) re-zeroes the ion detector at the present noise floor and detector and corrects the RF scan table for temperature drift (seconds); electrometer (CL) recalibrates the electrometer's full I-V response (longer, clears all zero offsets). The quadrupole RF is switched off at the end. |
cdem_off | 🛑 safety | Switch the electron multiplier off (HV0) and return to Faraday-cup detection. Always allowed, and it interrupts a running scan, mass measurement or leak check. |
degas | ⚠️ hazard | Start an ionizer degas (DG): 20 mA of 400 eV electrons clean the ion source by electron stimulated desorption. The CDEM is switched off and left off. Degassing shortens filament life; prefer a bakeout. Refused above max_filament_pressure_torr and beyond max_degas_minutes. Returns immediately; the RGA is busy until it finishes (any command would abort it), and filament_off / all_off stop it. |
filament_off | 🛑 safety | Switch the filament off (FL0), stopping a degas first if one is running. Always allowed, and it interrupts a running scan, mass measurement or leak check. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_status | 👁 read | Report the RGA state: filament emission, CDEM on/off and voltage, ionizer settings, scan settings, stored sensitivity factors, and the decoded error bytes (e.g. FL6 when the overpressure protection shut the filament down). Reading the error bytes clears the communication (EC?) and CDEM (EM?) error bytes, as on the instrument. |
histogram_scan | 👁 read | Record a bar-graph spectrum (HS1): one peak-locked value per integer m/z plus the total pressure. Faster than an analog scan and the usual way to follow a residual gas composition. |
identify_residual_gases | 👁 read | Run a histogram scan and assign the major peaks to likely gases with a simple lookup of standard 70 eV fragment patterns: H2 (2), He (4), CH4 (16/15), H2O (18/17), N2 or CO (28, split with 14 and 12), O2 (32), Ar (40), CO2 (44), plus diagnoses such as an air leak or hydrocarbon contamination. A screening aid, not a quantitative analysis. |
leak_check | 👁 read | Helium leak check: monitor m/z 4 while someone sprays helium on suspect joints, and report the baseline, every response above threshold_factor x baseline (start/end time, peak) and the time series. Keep the first few seconds free of helium so the baseline is clean. The response time of a real leak is a few seconds. Bounded by max_leak_check_duration_s. |
measure_masses | 👁 read | Measure partial pressures at a list of m/z values (peak-locked single-mass measurements, MR). Fast and precise for monitoring known gases; the precision and time per mass are set by the noise floor (set_scan_parameters). Pressures are N2-equivalent. |
read_total_pressure | 👁 read | Measure the total pressure with the RGA acting as an ionisation gauge (TP?, Faraday cup). Needs the filament on and the CDEM off. The value is N2-equivalent and can differ from a Bayard-Alpert gauge by a factor of a few, depending on the gas composition. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
set_cdem | ⚠️ hazard | Switch the electron multiplier (CDEM) on at a given high voltage for ~100-10000x more signal. High pressure shortens CDEM life and can destroy it, so this is refused unless the pressure is below max_cdem_pressure_torr (RGA total pressure measured now with the Faraday cup, a recent one, or external_pressure_torr), and the voltage is capped by max_cdem_voltage_v. Total-pressure readings are disabled while the CDEM is on. |
set_filament | ⚠️ hazard | Switch the filament on (or change its emission current). The filament burns out or is damaged above 1e-4 Torr, so this is refused unless the pressure is below max_filament_pressure_torr: pass external_pressure_torr from a separate gauge, or, if the filament is already on, the RGA's own total pressure is measured. The RGA's protection will also shut the filament down on overpressure (reported as FL6). |
set_scan_parameters | 🎛 control | Change measurement settings: noise floor (speed vs detection limit), electron energy, ion energy, focus plate voltage and analog-scan resolution. Sensitivity factors stored in the head are only valid at the default ionizer settings (70 eV, 12 eV, 90 V). After changing the noise floor the detector zero is re-adjusted automatically at the start of the next scan. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
The RGA filament must only run below 1e-4 Torr, and a CDEM should never see voltage above 1e-4 Torr, with 5e-6 Torr or less recommended (manual: FL command warning p. 6-35, "CDEM Handling and Care" in the Maintenance chapter). The RGA only measures pressure while its filament emits, so switching on needs evidence:
set_filament and degas: the pressure must be at or below max_filament_pressure_torr. set_cdem: at or below max_cdem_pressure_torr, and the voltage at or below max_cdem_voltage_v (the hardware range of 10-2490 V is enforced as well).external_pressure_torr (a reading from another gauge that the user confirmed) and, when the filament is on and the CDEM off, a total-pressure measurement taken right then. If both are available, the higher one is checked, so a mistyped gauge value can't override what the RGA measures. With the CDEM on (the RGA can't measure), a reading from the last max_pressure_reading_age_s is accepted, but only while the filament is still on: once it is off (switched off or tripped) an older reading says nothing about the present pressure.get_status reports it.all_off, filament_off and cdem_off interrupt a running scan, mass measurement or leak check (which then returns an error and no data) instead of waiting for it to finish. all_off attempts every step even if one fails, and reports what failed.| Limit | Default | Meaning |
|---|---|---|
max_filament_pressure_torr | 1e-4 Torr | Highest pressure at which the filament may be switched on or the ionizer degassed |
max_cdem_pressure_torr | 5e-6 Torr | Highest pressure at which the CDEM may be switched on |
max_cdem_voltage_v | 2000 V | Highest CDEM high voltage (hardware maximum 2490 V) |
max_pressure_reading_age_s | 60 s | Oldest RGA total-pressure reading accepted as evidence (only while the filament stays on) |
max_degas_minutes | 3 min | Longest ionizer degas (hardware maximum 20 min) |
max_scan_duration_s | 900 s | Longest estimated analog/histogram scan |
max_leak_check_duration_s | 1800 s | Longest helium leak-check run |
Override at launch, e.g. --limit max_cdem_voltage_v=2400 --limit max_filament_pressure_torr=1e-5.