原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

naja-scope

作者:keplertech版本 0.2.0i★ 22i在你的电脑上运行代码仓库 ↗
注册名称io.github.keplertech/naja-scope

安装方法

What it does

Let AI agents explore SystemVerilog, Verilog and VHDL designs: connectivity, hierarchy, source.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度16/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分28/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 naja-scope。按照 https://mcp.popnx.com/i/keplertech-naja-scope.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月19日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server naja-scope,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "naja-scope": { "command": "uvx", "args": [ "naja-scope" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 naja-scope 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "naja-scope": {
          "command": "uvx",
          "args": [
            "naja-scope"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 naja-scope 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 naja-scope,或回答中出现 naja-scope 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 naja-scope

naja-scope 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 naja-scope 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server naja-scope,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user naja-scope -- uvx naja-scope 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 naja-scope 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user naja-scope -- uvx naja-scope
  4. 在 Claude Code 中输入 /mcp

    应能看到 naja-scope 在列表中并显示已连接

  5. 试一试

    用 naja-scope 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 naja-scope,或回答中出现 naja-scope 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server naja-scope,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "naja-scope": { "command": "uvx", "args": [ "naja-scope" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 naja-scope 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 naja-scope 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 naja-scope,或回答中出现 naja-scope 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server naja-scope,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "naja-scope": { "type": "stdio", "command": "uvx", "args": [ "naja-scope" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 naja-scope 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 naja-scope 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 naja-scope,或回答中出现 naja-scope 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 naja-scope 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user naja-scope -- uvx naja-scope

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "naja-scope": {
      "command": "uvx",
      "args": [
        "naja-scope"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "naja-scope": {
      "command": "uvx",
      "args": [
        "naja-scope"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "naja-scope": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "naja-scope"
      ]
    }
  }
}

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
216/周
许可证i
Apache-2.0
连接方式
在你的电脑上运行
最新版本i
0.2.0
分类i
其他
发布到注册中心i
2026年11月19日
代码最后更新i
2026年11月15日
作者
keplertech
软件包
pypi: naja-scope
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月20日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 keplertech 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于5天前

  • ✓ 通过

    有许可证

    使用 Apache-2.0

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

尚未检查

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/keplertech-naja-scope.svg)](https://mcp.popnx.com/en/servers/keplertech-naja-scope)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20815 个服务器的 97%
  • 发布到注册中心的时间比此分类中其他 20815 个服务器的 99% 更新
  • 基础检查结果等于或优于此分类中其他 20815 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

naja-scope 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于5天前,最新版本(0.2.0)于昨天进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万4天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582414个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
naja-scope
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

naja-scope

Let your AI assistant explore SystemVerilog and VHDL designs — without pasting source code into the chat.

naja-scope is an MCP server that gives AI agents (Claude, and any MCP-compatible assistant) a precise, structured view of your elaborated SystemVerilog or VHDL design. Instead of dumping thousands of lines of RTL into the model's context, the agent asks targeted questions — *what drives this signal? what's inside this module? where does this net come from?* — and gets back small, exact answers with file-and-line references.

Built on the najaeda netlist engine.

**On a 17-question CVA6 benchmark,

the same Claude Code agent scored 17/17 with naja-scope versus 10/17 with

grep/read source tools — in 77 turns instead of 123, processing about 5×

less input.** How it was measured ↓

claude mcp add naja-scope -- uvx naja-scope

No separate install step: uvx fetches naja-scope and najaeda from PyPI on first launch. The buttons above do the same for VS Code and Cursor. Prefer pip? See Install.


Why

Large designs don't fit in a chat window. Pasting RTL is slow, expensive, and the model still can't reliably trace connectivity across hierarchy. naja-scope turns your design into something an agent can *navigate*:

  • 🔎 Trace connectivity — find what drives or loads any signal, across module boundaries.
  • 🌲 Walk the hierarchy — explore modules, instances, and ports on demand.
  • 🎯 Jump to source — every answer comes with file:line ranges, so the agent can quote the exact RTL that matters.
  • 🧩 Logic cones — trace fan-in / fan-out combinational cones up to the register boundary.
  • 💡 Recover design intent — enum state names, struct/union fields, and parameter formulas that normally vanish when a design is elaborated.

Requires najaeda 0.7.35 or newer. See the 0.1.26 release notes for test results and snapshot migration requirements.

Works on RTL and gate-level netlists alike: load elaborated SystemVerilog or VHDL (beta), or load a post-synthesis structural Verilog netlist together with its Liberty standard-cell library and navigate the gates the same way (see Gate-level designs).

All responses are token-bounded: lists paginate, large results truncate with clear markers. Your context stays small; your answers stay accurate.


Does it actually help?

naja-scope helps most when the answer exists in the elaborated design rather than in any single source file. In an initial 17-question run on the cv32a6_imac_sv32 configuration of CVA6, the same Claude Code agent was tested with naja-scope and with source-search tools alone.

Agent setupProvider and modelsInitial automated scoreTurnsInput processedOutput tokens
Agent + naja-scopeAnthropic Claude Code; claude-sonnet-4-6 with claude-haiku-4-5-20251001 helper17 / 17771,058,55619,520
Agent + grep/read sourceAnthropic Claude Code; claude-sonnet-4-6 with claude-haiku-4-5-20251001 helper10 / 171235,461,71955,962

The difference is clearest on structural questions that source search cannot answer directly:

CVA6 questionAgent + naja-scopeAgent + grep/read source
Flattened register groups under ex_stage_i92, in 4 turnsNo answer at the turn limit
Flattened register groups under commit_stage_i0, in 3 turnsNo answer at the turn limit
Elaborated hpdcache_mux variants20, in 3 turnsNo answer at the turn limit

Source search remains the right tool for local textual questions. naja-scope adds the elaborated hierarchy, connectivity, lowered primitives, and generated or uniquified structures that are otherwise difficult to reconstruct.

See the benchmark methodology and multi-model runner and historical result record for configuration, scoring, token accounting, and reproducibility details.


Install

pip install naja-scope        # pulls najaeda and the MCP runtime from PyPI

naja-scope-mcp # stdio MCP server


Connect it to Claude Code

claude mcp add naja-scope -- uvx naja-scope      # with uv, no install step

claude mcp add naja-scope -- naja-scope-mcp # after pip install naja-scope

Or add it to any MCP client's config:

{

"mcpServers": { "naja-scope": { "command": "uvx", "args": ["naja-scope"] } } }

(With a pip install, use "command": "naja-scope-mcp" and no args.)

Then just ask your assistant to load a design and start exploring:

*"Load my UART design from rtl/uart.sv with top uart_top, then show me

everything that drives tx_o."*

The agent loads the design once and answers follow-up questions instantly — no re-reading source, no giant pastes.


Connect it to ChatGPT

ChatGPT connects to MCP servers over an HTTP endpoint (custom connectors / Developer mode), so run naja-scope as an HTTP server instead of stdio:

naja-scope-mcp --transport streamable-http --host 127.0.0.1 --port 8000

This serves MCP at http:// :8000/mcp. Because ChatGPT reaches the server over the network, expose that URL where ChatGPT can see it — e.g. a public tunnel for a local run:

# example: a tunnel to your local server (ngrok, cloudflared, …)

ngrok http 8000 # -> https:// .ngrok.app → add /mcp

Then in ChatGPT, open Settings → Connectors (enable Developer mode if needed), add a custom connector, and paste the server URL (https:// /mcp). Once connected, ask it to load a design and explore exactly as above. (ChatGPT's connector UI evolves; the constant is: it needs an HTTPS MCP URL, which --transport streamable-http provides.)

⚠️ The HTTP server has no built-in auth — only expose it over a trusted tunnel,

and prefer short-lived tunnels for local experiments.


Gate-level designs

Already synthesized? Load the structural Verilog netlist together with the Liberty library that defines its standard cells, and navigate the gates the same way as RTL:

*"Load the Liberty library pdk/stdcells.lib, then the gate netlist

build/top.v, and tell me what cells top is built from and what drives

data_out."*

Hierarchy, per-cell counts (get_module_card), drivers/loads, and logic cones all work on the netlist; cones stop at the sequential cells. get_source shows a cell's or net's line in the netlist. For Yosys output, load with yosys_source_attributes=True: the (* src = ... *) attributes become origins that get_source(path, origin=0) reads back in the RTL. A runnable example lives in examples/ (stdcells.lib + counter2.v + gate_level.py).


Storage summaries

get_module_card reports direct-child register bits and inferred RAM/ROM summaries: width, depth, capacity in bits, read/write port counts, and initialization status. Native memory interfaces also report address_bits and reset_mode (none, async_low, async_high, sync_low, or sync_high). It lists up to 12 memories, with memories_truncated when more exist; initialized memories include a 64-character init_preview and init_truncated. Address zero occupies the least-significant word.

get_stats aggregates these counts below the selected instance using flat_register_bits, flat_memory_instances, flat_rom_instances, flat_ram_instances, and flat_memory_bits. Register bits count modeled flip-flop/latch states, including multibit Liberty banks; RAM capacity is separate. Sequential cells without a state model are counted in register_bits_unknown_instances (flat_ in statistics), so known bit counts remain explicit lower bounds when that count is nonzero. Memories are recognized from native naja primitives; opaque memory macros are not assigned an inferred capacity.

Bounded tool output

MCP tools send compact JSON text alongside the same structured result. get_stats() returns aggregate counts and total_models with an empty models list. Request details with get_stats(limit=5), or pass the summary's next_cursor to start paging models (25 per page when only a cursor is supplied; maximum 200). Totals stay the same on every page.

find, get_drivers, and get_loads default to 20 entries (maximum 200). Use find's next_cursor to continue; for endpoints, check truncated and raise limit or query an individual bus bit. Explicit large limits or deep hierarchy queries can still exceed a client's inline output cap.

These defaults change benchmark token counts; record the naja-scope version when comparing runs across this change.

Content comparison

get_content_hash() returns a versioned SHA-256 of the top model and its descendants; pass module="uart_tx" to hash one elaborated model. Use it to compare loaded content before and after snapshot reload or netlist edits. The response includes format_version and naja_git_hash; compare hashes only within the same format version and track the engine separately when primitive semantics matter. Names and IDs participate, while source metadata and primitive definitions are excluded. This is not functional equivalence. Hashing is explicit because large hierarchies can take time.

SystemVerilog time units

For mixed RTL where only some modules declare a time unit, pass default_timescale="1ns/1ps" to load_systemverilog. It supplies a fallback for modules without a time unit and preserves explicit declarations. The setting survives snapshots and load_intent re-elaboration.

VHDL (beta)

VHDL loading is available in beta. Call load_vhdl(file=["pkg.vhd", "child.vhd", "top.vhd"], top="my_entity") to explore its elaborated hierarchy and connectivity; the files may be listed in any order. A single path per call also works (load packages first); package-only files may return top: null until the top file is loaded. The frontend supports a restricted two-state RTL subset, and supported constructs may change. get_source reads VHDL entity, port, signal, instance and process origins, including after snapshot reloads.

Designs that name their library, as in library neorv32;, need library="neorv32" on the load.

Pass intent=True to load_vhdl, or call load_intent afterwards, to query get_intent for enum literals and their encodings, including FSM states held

只显示了开头部分;其余内容请在仓库中阅读