原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

USB LIN Converter

作者:uCAN-LIN版本 0.1.2i★ 94 (星标属于其他仓库)i在你的电脑上运行官方网站 ↗
注册名称io.github.Lukasz-Juranek/lin-usb-converter

安装方法

What it does

Sniff and reverse-engineer a car's LIN bus: capture, changing bits, speed detect, LDF decode

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度0/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分12/100

质量: 基础检查通过 2/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 USB LIN Converter。按照 https://mcp.popnx.com/i/lukasz-juranek-lin-usb-converter.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 2/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server USB LIN Converter,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "lin-usb-converter": { "command": "uvx", "args": [ "ucan-lin-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 USB LIN Converter 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "lin-usb-converter": {
          "command": "uvx",
          "args": [
            "ucan-lin-mcp"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 USB LIN Converter 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 USB LIN Converter,或回答中出现 USB LIN Converter 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 USB LIN Converter

USB LIN Converter 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 USB LIN Converter 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server USB LIN Converter,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user lin-usb-converter -- uvx ucan-lin-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 USB LIN Converter 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user lin-usb-converter -- uvx ucan-lin-mcp
  4. 在 Claude Code 中输入 /mcp

    应能看到 USB LIN Converter 在列表中并显示已连接

  5. 试一试

    用 USB LIN Converter 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 USB LIN Converter,或回答中出现 USB LIN Converter 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server USB LIN Converter,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "lin-usb-converter": { "command": "uvx", "args": [ "ucan-lin-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 USB LIN Converter 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 USB LIN Converter 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 USB LIN Converter,或回答中出现 USB LIN Converter 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server USB LIN Converter,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "lin-usb-converter": { "type": "stdio", "command": "uvx", "args": [ "ucan-lin-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 USB LIN Converter 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 USB LIN Converter 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 USB LIN Converter,或回答中出现 USB LIN Converter 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 USB LIN Converter 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user lin-usb-converter -- uvx ucan-lin-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "lin-usb-converter": {
      "command": "uvx",
      "args": [
        "ucan-lin-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "lin-usb-converter": {
      "command": "uvx",
      "args": [
        "ucan-lin-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "lin-usb-converter": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "ucan-lin-mcp"
      ]
    }
  }
}

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

GitHub 星标i
94 (星标属于其他仓库)
此条目指向他人的仓库,因此星标不计入排名
每周下载量i
59/周
许可证i
GPL-3.0
连接方式
在你的电脑上运行
最新版本i
0.1.2
分类i
其他
发布到注册中心i
2026年11月3日
代码最后更新i
2026年11月4日
作者
uCAN-LIN
软件包
pypi: ucan-lin-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ! 注意

    作者与仓库一致

    发布者(Lukasz-Juranek)不是仓库所有者(uCAN-LIN);可能是其他人代为上架的

  • ✓ 通过

    仍在维护

    代码最后更新于15天前

  • ✓ 通过

    有许可证

    使用 GPL-3.0

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 ucan-lin-mcp@0.1.2 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/lukasz-juranek-lin-usb-converter.svg)](https://mcp.popnx.com/en/servers/lukasz-juranek-lin-usb-converter)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20815 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 20815 个服务器的 74% 更新
  • 基础检查结果等于或优于此分类中其他 20815 个服务器的 46%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

USB LIN Converter 安全吗?

它在 3 项适用的基础检查中通过了 2 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于15天前,最新版本(0.1.2)于16天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582414个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
USB LIN Converter
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查2/34/44/44/41/44/4
许可证GPL-3.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

USB LIN Converter (uLC)

Open source USB ↔ LIN bus dongle. LIN 2.1 master, slave or monitor. SLCAN-compatible virtual COM port - works on Windows, Linux and macOS with no proprietary drivers.

The USB LIN Converter (uLC) is a small open-source USB dongle (STM32F042, ~31 × 18 mm) that lets a PC act as a LIN bus master, slave or passive monitor. It enumerates as a USB CDC virtual COM port and speaks an SLCAN-style ASCII protocol, so it bridges into Linux SocketCAN via slcand and works with parts of can-utils.

A commercial automotive LIN analyzer typically costs hundreds to thousands of euros. This one is around $27 on Tindie.

The LIN protocol implementation is based on openLIN.


Features

  • LIN 2.1 support
  • Monitor mode - full frame reception plus single-frame transmission
  • Master mode - up to 16 scheduled frame slots
  • Slave mode - up to 16 scheduled frame slots for slave simulation
  • 9600 / 19200 baud rate selection
  • Optical isolation between LIN and the USB / PC side
  • Software-controlled termination resistors
  • External 4.5 - 28 V powers the LIN transceiver
  • Device size 31 × 18 mm (without USB connector)
  • USB DFU bootloader for firmware updates
  • No proprietary drivers - Linux / macOS / Windows
  • MCP server so AI agents can sniff and reverse-engineer a LIN bus (see below)

Where to buy

WhereRegionLink
TindieWorldwidehttps://www.tindie.com/products/lll7/usb-lin-converter/
LectronzEUhttps://lectronz.com/stores/ucandevices
EltyPoland / EUhttps://elty.pl/
KamamiPoland / EUhttps://kamami.pl/

Quickstart

  1. Plug the device into a USB port. It enumerates as a virtual COM port (COM3 on Windows, /dev/ttyACM0 on Linux, /dev/cu.usbmodem* on macOS).
  2. No driver is needed on Windows 10/11, Linux or macOS: the built-in USB CDC driver is used. Since firmware 3.5 the device has its own USB ID from pid.codes, 1209:2779; older firmware used ST's generic 0483:5740 (on Windows 7/8 that needs the ST Virtual COM Port driver).
  3. Open the port at any baud rate (USB CDC ignores baud). Line ending must be CR (0x0D).
  4. Power the LIN side with 4.5 - 28 V on the external supply pin.
  5. Send S0 to select 19200 baud, then l to enter monitor mode. Bus traffic will start to appear.
Linux SocketCAN bridge
sudo slcand -o -s8 -t hw -S 921600 /dev/ttyACM0 slcan0

sudo ip link set slcan0 up candump slcan0

Python (pyserial) sniff snippet
import serial

ser = serial.Serial('/dev/ttyACM0', timeout=1) ser.write(b'S0\r') # 19200 baud ser.write(b'l\r') # monitor mode while True: line = ser.readline() if line: print(line.decode(errors='replace').strip())

A higher-level Python library is provided in python_lib/ (package ucanlintools).

AI agents (MCP server)

python_lib/ucanlintools/mcp_server.py is an MCP server that lets an AI agent sniff and reverse-engineer a LIN bus: capture traffic with per-id periods and changing bits, log every data change while you press a button, find the bus speed and checksum type automatically, and decode or encode signals from an LDF file. It is read-only by default; sending frames and acting as master or slave needs --allow-transmit.

uvx ucan-lin-mcp --mock             # from PyPI, no install step (Python 3.10+)

or from this repo: pip install -e "python_lib[mcp]" && ucanlin-mcp --mock

Register it with any MCP client as a stdio server:

{

"mcpServers": { "lin": {"command": "uvx", "args": ["ucan-lin-mcp", "--port", "COM3"]} } }

--mock runs a simulated bus. mcp_package/ is the ucan-lin-mcp launcher package and server.json its MCP Registry entry.

Tools: device_info, monitor_bus, detect_bus, load_ldf, decode_frame, encode_frame, and with --allow-transmit also send_frame, run_master, run_slave.


ASCII command reference

All commands are ASCII terminated with CR (0x0D). Errors return 0x07 (BEL).

CommandDescription
OOpen in master mode
LOpen in slave mode
lOpen in monitor mode
CClose LIN port
SxBaud: S2 = 9600, others = 19200
V / v / NHardware / firmware version / serial number query
tiiildd...Transmit full header + data frame (id, length, data)
r0iilHeader only request (slave answers)
r1ff0Master mode: start sending frames from schedule table
r2ff0Clear schedule table
r31 / r30Checksum for all frames: r31 classic (LIN 1.x), r30 enhanced (LIN 2.x, default). Diagnostic frames 0x3C/0x3D always use classic. Replies Z. Kept until power off; t31/t30 work too.
t04bbbbCustom LIN baud rate, bbbb = 4 hex digits (e.g. t0428B1 = 10417 baud). Send before adding frames. Replies Z.
T0iipptt0ldd... / R0iipptt0lFrame with explicit delay pp and response wait time tt (ms, hex), e.g. T00A643001A5. pp is the time from the start of the previous slot's header to this slot's header (firmware 3.4 and later; older firmware started it when the previous frame ended).
Commands are executed one at a time: wait for the reply (CR, z/Z or BEL) before sending the next one.

Full command reference and examples: https://ucandevices.github.io/ulc.html


Repository layout

DirectoryContents
embedded/STM32F042 firmware sources (STM32CubeMX project LUCEmbedded.ioc, Atollic TrueSTUDIO project under embedded/TrueSTUDIO/). USB layer generated with STM32CubeMX.
pcb/Open-hardware KiCad project for the LIN_USB_CONVERTER board, Gerbers and 1-click BOM.
python_lib/ucanlintools Python package with high-level master / slave / monitor helpers and examples.
doc/LIN 2.2A specification, MCU datasheet, LIN transceiver datasheet and supporting documents.

Build

Source is pure C. Import the Eclipse project in embedded/TrueSTUDIO/LUCEmbedded into STM32CubeIDE (tested with 1.19) and build the Debug configuration; the image is Debug/LUCEmbedded.bin. The openLIN stack is vendored in embedded/Src (open_lin_*.c/h, implementation/ST32). The USB CDC layer was generated with STM32CubeMX from embedded/LUCEmbedded.ioc.

Bootloader

The STM32F042 has an embedded ROM USB DFU bootloader. To enter it from a running device send boot\r over the virtual COM port. See this tutorial for the flashing flow.

With STM32CubeProgrammer installed, the flashing can be scripted:

python -c "import serial; serial.Serial('COM3').write(b'boot\r')"

STM32_Programmer_CLI -c port=usb1 -w LUC_0308.bin 0x08000000 -v -g 0x08000000


Testing

The test suite lives in python_lib/tests (pytest). It covers the firmware and the ucanlintools library:

FileHardwareWhat it tests
test_ldf_parser.py, test_linframe.py, test_luc_encoding.pynoneLDF parsing, signal encode/decode, frame formatting
test_luc_hardware.py1-2 donglesLibrary: version query, mode switching, monitor loopback, master → slave
test_firmware_protocol.py1-2 donglesFirmware over raw serial: malformed-command rejection, 16-row table limit, all frame lengths 1-8 in both directions with exact data check, live data update, diagnostic frames 0x3C/0x3D, unanswered headers, extended T/R row timing, custom baud rate, monitor reception (including back-to-back frames) and monitor transmit. Parametrized for 19200 and 9600 baud.
test_lib_simulation.py2 donglesScripted MasterSimulation.py / SlaveSimulation.py: LDF-encoded master frame, slave response, both changing at runtime, at both speeds

Setup: two converters on one LIN bus (LIN pins connected, external LIN supply applied). LUC_MASTER_PORT is used as LIN master, LUC_SLAVE_PORT as slave / monitor. Tests skip automatically when a port can't be opened, so the offline tests always run.

cd python_lib

pip install pyserial lark pytest LUC_MASTER_PORT=COM3 LUC_SLAVE_PORT=COM56 PYTHONPATH=. pytest tests -v

swap the ports and run again to test each converter in both roles

LUC_MASTER_PORT=COM56 LUC_SLAVE_PORT=COM3 PYTHONPATH=. pytest tests -v

On Windows PowerShell set the variables with $env:LUC_MASTER_PORT="COM3" etc.

How firmware 3.8 was tested
  • Same setup, both converters flashed with LUC_0308.bin.
  • Monitor fix: frames sent back to back (each one as soon as the previous command was acknowledged, about 4 ms apart at 19200 baud) leave less idle time than the monitor's end-of-frame timeout, so the next break reset the reception and the previous frame was lost. The monitor now reports the previous frame when the next break arrives. Before: 15 of 32 frames received; with the fix: 32 of 32, in order.
  • New regression test test_monitor_reports_back_to_back_frames (fails on 3.7, passes on 3.8); full suite run twice with the roles swapped: 66/66 passed in each direction.
  • CANgaroo uLC driver hardware test (two converters, Windows): 32/32 checks passed.
How firmware 3.7 was tested
  • Same setup, both converters flashed with LUC_0307.bin.
  • Slave fix traced byte by byte with a diagnostic build: when the slave subscribed a frame nobody answered, the next header's break byte was counted as that frame's data, and the stale count made the slave take the following frame's last data byte as its checksum and drop it. With the fix the slave receives every following frame (23 of 23 in 1.5 s, before 0).
  • New regression test test_slave_subscribed_to_unanswered_header_keeps_next_frame; full suite run twice with the roles swapped: 65/65 passed in each direction.
How firmware 3.6 was tested
  • Same setup, both converters flashed with LUC_0306.bin.
  • Clock recovery checked with a test-only build that reported the CRS registers: the CRS synchronised to the USB SOF within the first seconds (SYNCOK set, no errors afterwards) and moved the HSI48 trim from 32 to 35 on one converter, i.e. that converter's clock ran measurably slow without it.
  • Full suite run twice with the roles swapped: 63/63 passed in each direction; master slot periods unchanged from 3.4 (within about 1 ms of the configured delay).
How firmware 3.5 was tested
  • Same setup, both converters flashed with LUC_0305.bin. They enumerate as 1209:2779 and Windows 10 loads its built-in CDC driver without any installation.
  • Full suite run twice with the roles swapped: 55/55 passed in each direction. Firmware 3.5 changes only the USB ID, the LIN code is the same as 3.4.
How firmware 3.4 was tested
  • Two uLC converters (hardware V0001), both flashed with LUC_0304.bin, connected on one powered LIN bus.
  • Full suite run twice with the roles swapped: 55/55 passed in

只显示了开头部分;其余内容请在仓库中阅读