原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Tapo MCP

作者:mihai-dinculescu版本 0.7.0i★ 877 (整个仓库的星标)i在你的电脑上运行代码仓库 ↗
注册名称io.github.mihai-dinculescu/tapo-mcp

安装方法

What it does

MCP server for discovering and controlling TP-Link Tapo smart home devices via AI Agents

  • Connects 在你的电脑上运行
  • Account or key Needs TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY · 1 setting to fill in (TAPO_MCP_DISCOVERY_TARGET)
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度28/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分40/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 2 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Tapo MCP。按照 https://mcp.popnx.com/i/mihai-dinculescu-tapo-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Tapo MCP,按顺序:1) 用 docker --version 检查是否有 Docker。没有的话,请让我从 https://www.docker.com/products/docker-desktop/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "tapo": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "TAPO_MCP_USERNAME", "-e", "TAPO_MCP_PASSWORD", "-e", "TAPO_MCP_CAMERA_USERNAME", "-e", "TAPO_MCP_CAMERA_PASSWORD", "-e", "TAPO_MCP_DISCOVERY_TARGET", "-e", "TAPO_MCP_API_KEY", "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0" ], "env": { "TAPO_MCP_USERNAME": "your-value", "TAPO_MCP_PASSWORD": "your-value", "TAPO_MCP_CAMERA_USERNAME": "your-value", "TAPO_MCP_CAMERA_PASSWORD": "your-value", "TAPO_MCP_DISCOVERY_TARGET": "your-value", "TAPO_MCP_API_KEY": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY, TAPO_MCP_DISCOVERY_TARGET 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Tapo MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Docker(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    docker --version
    • 显示版本号(例如 Docker version …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 安装 Docker Desktop:Mac 打开 Docker.dmg,把图标拖到“应用程序”(按电脑选择 Apple silicon 或 Intel 版本)· Windows 双击 Docker Desktop Installer.exe · 装好后打开 Docker Desktop 应用并保持运行。不需要 curl 命令

    打开 Docker 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: docker --version

    安装一次,所有需要 Docker 的工具都能用

  2. 注册并创建 Tapo MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Tapo MCP 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • TAPO_MCP_DISCOVERY_TARGET 用于设备发现的 IP 地址,通常为网络的广播地址(例如 192.168.1.255)
      查看英文原文IP address for device discovery, usually the network's broadcast address (e.g. 192.168.1.255)

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  5. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "tapo": {
          "command": "docker",
          "args": [
            "run",
            "-i",
            "--rm",
            "-e",
            "TAPO_MCP_USERNAME",
            "-e",
            "TAPO_MCP_PASSWORD",
            "-e",
            "TAPO_MCP_CAMERA_USERNAME",
            "-e",
            "TAPO_MCP_CAMERA_PASSWORD",
            "-e",
            "TAPO_MCP_DISCOVERY_TARGET",
            "-e",
            "TAPO_MCP_API_KEY",
            "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0"
          ],
          "env": {
            "TAPO_MCP_USERNAME": "your-value",
            "TAPO_MCP_PASSWORD": "your-value",
            "TAPO_MCP_CAMERA_USERNAME": "your-value",
            "TAPO_MCP_CAMERA_PASSWORD": "your-value",
            "TAPO_MCP_DISCOVERY_TARGET": "your-value",
            "TAPO_MCP_API_KEY": "your-value"
          }
        }
      }
    }

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 退出 Claude 再重新打开

  7. 试一试

    用 Tapo MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Tapo MCP,或回答中出现 Tapo MCP 的工具名称,就表示连接成功

5 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • TAPO_MCP_ALLOWED_HOSTS 可选的以逗号分隔的 Host 请求头允许列表;将取代仅允许回环地址的默认设置
    查看英文原文Optional comma-separated Host header allowlist; replaces the loopback-only default
  • TAPO_MCP_PUBLIC_URL 可选的基础 URL,客户端通过它访问服务器;启用短期有效的快照链接
    查看英文原文Optional base URL clients reach the server at; enables short-lived snapshot links
  • TAPO_MCP_DISCOVERY_TIMEOUT 设备发现的超时时间(秒),必须在 1 到 60 之间
    查看英文原文Device discovery timeout in seconds; must be between 1 and 60
    · 默认值 5
  • TAPO_MCP_DISCOVERY_INTERVAL 后台设备发现之间的间隔秒数,用于刷新设备列表;必须至少为 TAPO_MCP_DISCOVERY_TIMEOUT,且至多为 86400(一天)。工具调用会在发现运行时等待,因此过短的…
    查看英文原文Seconds between background device discoveries that refresh the device list; must be at least TAPO_MCP_DISCOVERY_TIMEOUT and at most 86400 (one day); tool calls wait while a discovery runs, so a short…
    · 默认值 600
  • OTEL_EXPORTER_OTLP_ENDPOINT Base URL of an OTLP/HTTP collector to export traces to, such as http://localhost:4318; traces go to /v1/traces under it

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Tapo MCP

Tapo MCP 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Tapo MCP 的应用

  • 需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次)
  • 需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次)
  • 需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Tapo MCP,按顺序:1) 用 docker --version 检查是否有 Docker。没有的话,请让我从 https://www.docker.com/products/docker-desktop/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user tapo --env TAPO_MCP_USERNAME=your-value --env TAPO_MCP_PASSWORD=your-value --env TAPO_MCP_CAMERA_USERNAME=your-value --env TAPO_MCP_CAMERA_PASSWORD=your-value --env TAPO_MCP_DISCOVERY_TARGET=your-value --env TAPO_MCP_API_KEY=your-value -- docker run -i --rm -e TAPO_MCP_USERNAME -e TAPO_MCP_PASSWORD -e TAPO_MCP_CAMERA_USERNAME -e TAPO_MCP_CAMERA_PASSWORD -e TAPO_MCP_DISCOVERY_TARGET -e TAPO_MCP_API_KEY ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY, TAPO_MCP_DISCOVERY_TARGET 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Tapo MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Docker(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    docker --version
    • 显示版本号(例如 Docker version …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 安装 Docker Desktop:Mac 打开 Docker.dmg,把图标拖到“应用程序”(按电脑选择 Apple silicon 或 Intel 版本)· Windows 双击 Docker Desktop Installer.exe · 装好后打开 Docker Desktop 应用并保持运行。不需要 curl 命令

    打开 Docker 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: docker --version

    安装一次,所有需要 Docker 的工具都能用

  2. 注册并创建 Tapo MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Tapo MCP 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • TAPO_MCP_DISCOVERY_TARGET 用于设备发现的 IP 地址,通常为网络的广播地址(例如 192.168.1.255)
      查看英文原文IP address for device discovery, usually the network's broadcast address (e.g. 192.168.1.255)

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  5. 粘贴这条命令并按 Enter

    claude mcp add --scope user tapo --env TAPO_MCP_USERNAME=your-value --env TAPO_MCP_PASSWORD=your-value --env TAPO_MCP_CAMERA_USERNAME=your-value --env TAPO_MCP_CAMERA_PASSWORD=your-value --env TAPO_MCP_DISCOVERY_TARGET=your-value --env TAPO_MCP_API_KEY=your-value -- docker run -i --rm -e TAPO_MCP_USERNAME -e TAPO_MCP_PASSWORD -e TAPO_MCP_CAMERA_USERNAME -e TAPO_MCP_CAMERA_PASSWORD -e TAPO_MCP_DISCOVERY_TARGET -e TAPO_MCP_API_KEY ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0

    按 Enter 前,把“your-value”改成你的密钥

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 在 Claude Code 中输入 /mcp

    应能看到 Tapo MCP 在列表中并显示已连接

  7. 试一试

    用 Tapo MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Tapo MCP,或回答中出现 Tapo MCP 的工具名称,就表示连接成功

5 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • TAPO_MCP_ALLOWED_HOSTS 可选的以逗号分隔的 Host 请求头允许列表;将取代仅允许回环地址的默认设置
    查看英文原文Optional comma-separated Host header allowlist; replaces the loopback-only default
  • TAPO_MCP_PUBLIC_URL 可选的基础 URL,客户端通过它访问服务器;启用短期有效的快照链接
    查看英文原文Optional base URL clients reach the server at; enables short-lived snapshot links
  • TAPO_MCP_DISCOVERY_TIMEOUT 设备发现的超时时间(秒),必须在 1 到 60 之间
    查看英文原文Device discovery timeout in seconds; must be between 1 and 60
    · 默认值 5
  • TAPO_MCP_DISCOVERY_INTERVAL 后台设备发现之间的间隔秒数,用于刷新设备列表;必须至少为 TAPO_MCP_DISCOVERY_TIMEOUT,且至多为 86400(一天)。工具调用会在发现运行时等待,因此过短的…
    查看英文原文Seconds between background device discoveries that refresh the device list; must be at least TAPO_MCP_DISCOVERY_TIMEOUT and at most 86400 (one day); tool calls wait while a discovery runs, so a short…
    · 默认值 600
  • OTEL_EXPORTER_OTLP_ENDPOINT Base URL of an OTLP/HTTP collector to export traces to, such as http://localhost:4318; traces go to /v1/traces under it

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Tapo MCP,按顺序:1) 用 docker --version 检查是否有 Docker。没有的话,请让我从 https://www.docker.com/products/docker-desktop/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "tapo": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "TAPO_MCP_USERNAME", "-e", "TAPO_MCP_PASSWORD", "-e", "TAPO_MCP_CAMERA_USERNAME", "-e", "TAPO_MCP_CAMERA_PASSWORD", "-e", "TAPO_MCP_DISCOVERY_TARGET", "-e", "TAPO_MCP_API_KEY", "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0" ], "env": { "TAPO_MCP_USERNAME": "your-value", "TAPO_MCP_PASSWORD": "your-value", "TAPO_MCP_CAMERA_USERNAME": "your-value", "TAPO_MCP_CAMERA_PASSWORD": "your-value", "TAPO_MCP_DISCOVERY_TARGET": "your-value", "TAPO_MCP_API_KEY": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY, TAPO_MCP_DISCOVERY_TARGET 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Tapo MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Docker(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    docker --version
    • 显示版本号(例如 Docker version …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 安装 Docker Desktop:Mac 打开 Docker.dmg,把图标拖到“应用程序”(按电脑选择 Apple silicon 或 Intel 版本)· Windows 双击 Docker Desktop Installer.exe · 装好后打开 Docker Desktop 应用并保持运行。不需要 curl 命令

    打开 Docker 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: docker --version

    安装一次,所有需要 Docker 的工具都能用

  2. 注册并创建 Tapo MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Tapo MCP 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • TAPO_MCP_DISCOVERY_TARGET 用于设备发现的 IP 地址,通常为网络的广播地址(例如 192.168.1.255)
      查看英文原文IP address for device discovery, usually the network's broadcast address (e.g. 192.168.1.255)

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  5. 填写你的密钥

    在 Tapo MCP 的设置中,TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY, TAPO_MCP_DISCOVERY_TARGET 还是空的,填入你的密钥并保存

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 在 Cursor 中以 Agent 模式打开 AI 聊天

  7. 试一试

    用 Tapo MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Tapo MCP,或回答中出现 Tapo MCP 的工具名称,就表示连接成功

5 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • TAPO_MCP_ALLOWED_HOSTS 可选的以逗号分隔的 Host 请求头允许列表;将取代仅允许回环地址的默认设置
    查看英文原文Optional comma-separated Host header allowlist; replaces the loopback-only default
  • TAPO_MCP_PUBLIC_URL 可选的基础 URL,客户端通过它访问服务器;启用短期有效的快照链接
    查看英文原文Optional base URL clients reach the server at; enables short-lived snapshot links
  • TAPO_MCP_DISCOVERY_TIMEOUT 设备发现的超时时间(秒),必须在 1 到 60 之间
    查看英文原文Device discovery timeout in seconds; must be between 1 and 60
    · 默认值 5
  • TAPO_MCP_DISCOVERY_INTERVAL 后台设备发现之间的间隔秒数,用于刷新设备列表;必须至少为 TAPO_MCP_DISCOVERY_TIMEOUT,且至多为 86400(一天)。工具调用会在发现运行时等待,因此过短的…
    查看英文原文Seconds between background device discoveries that refresh the device list; must be at least TAPO_MCP_DISCOVERY_TIMEOUT and at most 86400 (one day); tool calls wait while a discovery runs, so a short…
    · 默认值 600
  • OTEL_EXPORTER_OTLP_ENDPOINT Base URL of an OTLP/HTTP collector to export traces to, such as http://localhost:4318; traces go to /v1/traces under it

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要 Tapo MCP 的密钥(在开发者网站创建) · 需要填写 1 项设置(TAPO_MCP_DISCOVERY_TARGET) · 需要先在电脑上安装 Docker(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Tapo MCP,按顺序:1) 用 docker --version 检查是否有 Docker。没有的话,请让我从 https://www.docker.com/products/docker-desktop/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "tapo": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "TAPO_MCP_USERNAME", "-e", "TAPO_MCP_PASSWORD", "-e", "TAPO_MCP_CAMERA_USERNAME", "-e", "TAPO_MCP_CAMERA_PASSWORD", "-e", "TAPO_MCP_DISCOVERY_TARGET", "-e", "TAPO_MCP_API_KEY", "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0" ], "env": { "TAPO_MCP_USERNAME": "your-value", "TAPO_MCP_PASSWORD": "your-value", "TAPO_MCP_CAMERA_USERNAME": "your-value", "TAPO_MCP_CAMERA_PASSWORD": "your-value", "TAPO_MCP_DISCOVERY_TARGET": "your-value", "TAPO_MCP_API_KEY": "your-value" } } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY, TAPO_MCP_DISCOVERY_TARGET 先保留 "your-value",请我自己把真实值粘贴到文件或应用的输入框里。不要让我在对话里输入密钥。5) 按约定执行,然后确认 Tapo MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 Docker(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    docker --version
    • 显示版本号(例如 Docker version …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: 安装 Docker Desktop:Mac 打开 Docker.dmg,把图标拖到“应用程序”(按电脑选择 Apple silicon 或 Intel 版本)· Windows 双击 Docker Desktop Installer.exe · 装好后打开 Docker Desktop 应用并保持运行。不需要 curl 命令

    打开 Docker 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: docker --version

    安装一次,所有需要 Docker 的工具都能用

  2. 注册并创建 Tapo MCP 的密钥

    打开开发者网站,注册账户并创建 API 密钥,下一步要用。价格和免费方案请看开发者网站。

    打开 Tapo MCP 网站 ↗

  3. 填写 1 项设置

    这些是程序设置,不是密钥,无需注册。按开发者的说明填写。

    • TAPO_MCP_DISCOVERY_TARGET 用于设备发现的 IP 地址,通常为网络的广播地址(例如 192.168.1.255)
      查看英文原文IP address for device discovery, usually the network's broadcast address (e.g. 192.168.1.255)

    说明为自动翻译,变量名保持原样;不确定时请查看原文。

  4. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  5. 填写你的密钥

    在 Tapo MCP 的设置中,TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY, TAPO_MCP_DISCOVERY_TARGET 还是空的,填入你的密钥并保存

    只把密钥粘贴到应用的输入框里,不要粘贴到聊天中或发给任何人

  6. 在 VS Code 中以 Agent 模式打开 AI 聊天

  7. 试一试

    用 Tapo MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Tapo MCP,或回答中出现 Tapo MCP 的工具名称,就表示连接成功

5 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • TAPO_MCP_ALLOWED_HOSTS 可选的以逗号分隔的 Host 请求头允许列表;将取代仅允许回环地址的默认设置
    查看英文原文Optional comma-separated Host header allowlist; replaces the loopback-only default
  • TAPO_MCP_PUBLIC_URL 可选的基础 URL,客户端通过它访问服务器;启用短期有效的快照链接
    查看英文原文Optional base URL clients reach the server at; enables short-lived snapshot links
  • TAPO_MCP_DISCOVERY_TIMEOUT 设备发现的超时时间(秒),必须在 1 到 60 之间
    查看英文原文Device discovery timeout in seconds; must be between 1 and 60
    · 默认值 5
  • TAPO_MCP_DISCOVERY_INTERVAL 后台设备发现之间的间隔秒数,用于刷新设备列表;必须至少为 TAPO_MCP_DISCOVERY_TIMEOUT,且至多为 86400(一天)。工具调用会在发现运行时等待,因此过短的…
    查看英文原文Seconds between background device discoveries that refresh the device list; must be at least TAPO_MCP_DISCOVERY_TIMEOUT and at most 86400 (one day); tool calls wait while a discovery runs, so a short…
    · 默认值 600
  • OTEL_EXPORTER_OTLP_ENDPOINT Base URL of an OTLP/HTTP collector to export traces to, such as http://localhost:4318; traces go to /v1/traces under it

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Tapo MCP 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user tapo --env TAPO_MCP_USERNAME=your-value --env TAPO_MCP_PASSWORD=your-value --env TAPO_MCP_CAMERA_USERNAME=your-value --env TAPO_MCP_CAMERA_PASSWORD=your-value --env TAPO_MCP_DISCOVERY_TARGET=your-value --env TAPO_MCP_API_KEY=your-value -- docker run -i --rm -e TAPO_MCP_USERNAME -e TAPO_MCP_PASSWORD -e TAPO_MCP_CAMERA_USERNAME -e TAPO_MCP_CAMERA_PASSWORD -e TAPO_MCP_DISCOVERY_TARGET -e TAPO_MCP_API_KEY ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "tapo": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "TAPO_MCP_USERNAME",
        "-e",
        "TAPO_MCP_PASSWORD",
        "-e",
        "TAPO_MCP_CAMERA_USERNAME",
        "-e",
        "TAPO_MCP_CAMERA_PASSWORD",
        "-e",
        "TAPO_MCP_DISCOVERY_TARGET",
        "-e",
        "TAPO_MCP_API_KEY",
        "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0"
      ],
      "env": {
        "TAPO_MCP_USERNAME": "your-value",
        "TAPO_MCP_PASSWORD": "your-value",
        "TAPO_MCP_CAMERA_USERNAME": "your-value",
        "TAPO_MCP_CAMERA_PASSWORD": "your-value",
        "TAPO_MCP_DISCOVERY_TARGET": "your-value",
        "TAPO_MCP_API_KEY": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "tapo": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "TAPO_MCP_USERNAME",
        "-e",
        "TAPO_MCP_PASSWORD",
        "-e",
        "TAPO_MCP_CAMERA_USERNAME",
        "-e",
        "TAPO_MCP_CAMERA_PASSWORD",
        "-e",
        "TAPO_MCP_DISCOVERY_TARGET",
        "-e",
        "TAPO_MCP_API_KEY",
        "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0"
      ],
      "env": {
        "TAPO_MCP_USERNAME": "your-value",
        "TAPO_MCP_PASSWORD": "your-value",
        "TAPO_MCP_CAMERA_USERNAME": "your-value",
        "TAPO_MCP_CAMERA_PASSWORD": "your-value",
        "TAPO_MCP_DISCOVERY_TARGET": "your-value",
        "TAPO_MCP_API_KEY": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "tapo": {
      "type": "stdio",
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "TAPO_MCP_USERNAME",
        "-e",
        "TAPO_MCP_PASSWORD",
        "-e",
        "TAPO_MCP_CAMERA_USERNAME",
        "-e",
        "TAPO_MCP_CAMERA_PASSWORD",
        "-e",
        "TAPO_MCP_DISCOVERY_TARGET",
        "-e",
        "TAPO_MCP_API_KEY",
        "ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0"
      ],
      "env": {
        "TAPO_MCP_USERNAME": "your-value",
        "TAPO_MCP_PASSWORD": "your-value",
        "TAPO_MCP_CAMERA_USERNAME": "your-value",
        "TAPO_MCP_CAMERA_PASSWORD": "your-value",
        "TAPO_MCP_DISCOVERY_TARGET": "your-value",
        "TAPO_MCP_API_KEY": "your-value"
      }
    }
  }
}

需要你填写的值

  • TAPO_MCP_USERNAME 机密 必填 env
    TP-Link Tapo 账户邮箱
    查看英文原文TP-Link Tapo account email
  • TAPO_MCP_PASSWORD 机密 必填 env
    TP-Link Tapo 账户密码
    查看英文原文TP-Link Tapo account password
  • TAPO_MCP_CAMERA_USERNAME 机密 必填 env
    可选的摄像头账户用户名;拍摄摄像头快照时必需
    查看英文原文Optional camera account username; required for taking camera snapshots
  • TAPO_MCP_CAMERA_PASSWORD 机密 必填 env
    可选的摄像头账户密码;拍摄摄像头快照时必需
    查看英文原文Optional camera account password; required for taking camera snapshots
  • TAPO_MCP_DISCOVERY_TARGET 必填 env
    用于设备发现的 IP 地址,通常为网络的广播地址(例如 192.168.1.255)
    查看英文原文IP address for device discovery, usually the network's broadcast address (e.g. 192.168.1.255)
  • TAPO_MCP_API_KEY 机密 必填 env
    客户端在 Authorization 请求头中发送的 Bearer 令牌;镜像监听所有网络接口,若未设置则无法启动
    查看英文原文Bearer token that clients send in the Authorization header; the image listens on all interfaces and does not start without it
  • TAPO_MCP_ALLOWED_HOSTS env
    可选的以逗号分隔的 Host 请求头允许列表;将取代仅允许回环地址的默认设置
    查看英文原文Optional comma-separated Host header allowlist; replaces the loopback-only default
  • TAPO_MCP_PUBLIC_URL env
    可选的基础 URL,客户端通过它访问服务器;启用短期有效的快照链接
    查看英文原文Optional base URL clients reach the server at; enables short-lived snapshot links
  • TAPO_MCP_DISCOVERY_TIMEOUT env
    设备发现的超时时间(秒),必须在 1 到 60 之间
    查看英文原文Device discovery timeout in seconds; must be between 1 and 60
  • TAPO_MCP_DISCOVERY_INTERVAL env
    后台设备发现之间的间隔秒数,用于刷新设备列表;必须至少为 TAPO_MCP_DISCOVERY_TIMEOUT,且至多为 86400(一天)。工具调用会在发现运行时等待,因此过短的…
    查看英文原文Seconds between background device discoveries that refresh the device list; must be at least TAPO_MCP_DISCOVERY_TIMEOUT and at most 86400 (one day); tool calls wait while a discovery runs, so a short…
  • OTEL_EXPORTER_OTLP_ENDPOINT env
    Base URL of an OTLP/HTTP collector to export traces to, such as http://localhost:4318; traces go to /v1/traces under it

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

GitHub 星标i
877 (整个仓库的星标)
该仓库包含多个 MCP 条目,星标在排名中只计算一次
每周下载量i
不在 npm/PyPI 上
连接方式
在你的电脑上运行
传输方式
streamable-http
最新版本i
0.7.0
分类i
其他
发布到注册中心i
2026年11月12日
代码最后更新i
2026年11月13日
作者
mihai-dinculescu
软件包
oci: ghcr.io/mihai-dinculescu/tapo-mcp:0.7.0
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 mihai-dinculescu 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于6天前

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

未检查:只能检查标明版本的 npm 和 PyPI 包

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/mihai-dinculescu-tapo-mcp.svg)](https://mcp.popnx.com/en/servers/mihai-dinculescu-tapo-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20693 个服务器的 99%
  • 发布到注册中心的时间比此分类中其他 20693 个服务器的 87% 更新
  • 基础检查结果等于或优于此分类中其他 20693 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Tapo MCP 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

你需要填写:TAPO_MCP_USERNAME, TAPO_MCP_PASSWORD, TAPO_MCP_CAMERA_USERNAME, TAPO_MCP_CAMERA_PASSWORD, TAPO_MCP_API_KEY

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于6天前,最新版本(0.7.0)于7天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Docker。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582514个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
Tapo MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥是否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

tapo-mcp

MCP server that exposes Tapo smart-home devices as AI-callable tools and resources via the Model Context Protocol.

Built on the tapo crate and the rmcp SDK. Runs as an HTTP server (Streamable HTTP transport).

Example Prompts

"List all my Tapo devices"

"Turn off the office light"

"Turn on smart plug 4 on the power strip"

"Is the office light on?"

"Set the bedroom light to 50% brightness"

"Change the living room light to Coral"

"Take a snapshot from the baby monitor"

"What's the temperature in the kitchen?"

"Show me the last 24 hours of temperature from the living room temperature and humidity sensor"

"List the 5 most recent events on the smart button"

"How much energy did the washing machine plug use each day this month?"

"Show me the TV's power draw over the last 6 hours"

Tools

ToolDescription
list_devicesList available Tapo devices on the network (includes set and get capabilities).
get_device_stateGet a device's current state (e.g. {"type": "DeviceInfo"}). Checks the capability's parameters, then verifies the device ID matches at the given IP.
control_deviceControl a device by applying 1 to 12 set capabilities, in order. Checks the count and values, then verifies the device ID matches at the given IP; a capability the device does not support fails before any is applied. Returns the device's state afterwards, read back from the device.
take_snapshotCapture a still JPEG snapshot from a Tapo camera (~640x360), with the device id, capture time and size as text, plus a short-lived link when TAPO_MCP_PUBLIC_URL is set (see Snapshot links). Verifies the device ID matches at the given IP first.

Resources

URIDescription
tapo://devicesJSON list of discovered Tapo devices.

Capabilities

Devices and child devices expose separate lists of set and get capabilities they support. Child devices have no IP of their own; their ip is their parent's, which is the one to pass with the child's id.

Set Capabilities
CapabilityDescription
BrightnessSet the device brightness (1-100)
ColorSet the device color using a preset name
HueSaturationSet the device color using a hue (0-360) and saturation (1-100)
ColorTemperatureSet the device color temperature (2500-6500)
OnOffTurn the device on or off
Get Capabilities
CapabilityDescription
DetectionsRead the detections stored on a camera's SD card, with the events detected (person, motion, ...), for up to 24 hours (C120, C210, C220, C225, C325WB, C520WS, TC40, TC70)
DeviceInfoRead the device's current state
EnergyDataHourlyRead the energy used per hour, in Wh, for up to 8 days (P110, P110M, P115, P304M, P316M)
EnergyDataDailyRead the energy used per day, in Wh, for a quarter of a year (P110, P110M, P115, P304M, P316M)
EnergyDataMonthlyRead the energy used per month, in Wh, for a year (P110, P110M, P115, P304M, P316M)
EnergyMeterDataRead the live voltage, current and power, and the energy used since the device last restarted (P110, P110M, P115, P304M, P316M)
PowerDataEvery5MinutesRead the power draw every 5 minutes, in W, for up to 12 hours (P110, P110M, P115, P304M, P316M)
PowerDataHourlyRead the power draw every hour, in W, for up to 6 days (P110, P110M, P115, P304M, P316M)
SnapshotCapture a still JPEG snapshot. Served by the dedicated take_snapshot tool (binary, not JSON state)
TemperatureHumidityRecordsRead the last 24 hours of temperature and humidity records (T310, T315) at 15 minute intervals
TriggerLogsRead paginated trigger logs from a hub child sensor (S200, T100, T110, T300)

Configuration

All configuration is via environment variables prefixed with TAPO_MCP_:

VariableRequiredDefaultDescription
TAPO_MCP_USERNAMEYes—Tapo account email
TAPO_MCP_PASSWORDYes—Tapo account password
TAPO_MCP_CAMERA_USERNAMENo—Camera account username[^camera]. Required by take_snapshot.
TAPO_MCP_CAMERA_PASSWORDNo—Camera account password[^camera]. Required by take_snapshot.
TAPO_MCP_DISCOVERY_TARGETYes—IP address for device discovery, usually the network's broadcast address (e.g. 192.168.1.255)
TAPO_MCP_HTTP_ADDRNo127.0.0.1:3000Address the server listens on
TAPO_MCP_DISCOVERY_TIMEOUTNo5Discovery timeout in seconds. Must be between 1 and 60[^discovery]
TAPO_MCP_DISCOVERY_INTERVALNo600Seconds between background discoveries that refresh the device list. Must be at least TAPO_MCP_DISCOVERY_TIMEOUT and at most 86400 (one day)[^discovery]
TAPO_MCP_API_KEYNo—Bearer token for HTTP authentication (see below)
TAPO_MCP_ALLOWED_HOSTSNoloopback onlyComma-separated Host header allowlist (see Network exposure)
TAPO_MCP_PUBLIC_URLNo—Base URL clients reach the server at (e.g. https://tapo.example.com). Enables short-lived snapshot links (see Snapshot links)

Clients connect to the MCP endpoint at /mcp on that address, for example http://127.0.0.1:3000/mcp. / still works but is deprecated: it logs a warning and will be removed in a later release.

Authentication

When TAPO_MCP_API_KEY is set, the server requires every HTTP request except /livez and snapshot links to include an Authorization: Bearer header. Requests with a missing or invalid token receive a 401 Unauthorized response.

When the variable is unset (or empty/whitespace-only), the server runs without authentication.

Network exposure

The server enforces the MCP Streamable HTTP DNS-rebinding protection. By default only loopback Host headers (localhost, 127.0.0.1, ::1) are accepted, which prevents a malicious web page from reaching a locally running server via DNS rebinding. Requests to the MCP endpoint with any other Host receive a 403 Forbidden response, and the server logs a warning that names the refused host. Snapshot links are not covered by this check (see Snapshot links).

To reach the server over the LAN or from another host, set TAPO_MCP_ALLOWED_HOSTS to the exact hostname(s) or host:port authorities clients connect to, for example TAPO_MCP_ALLOWED_HOSTS="tapo-mcp.lan:3000,192.168.1.50:3000". This replaces the loopback default, so include loopback entries as well if you still need them.

To avoid shipping unauthenticated smart-home control, the server refuses to start when it binds to a non-loopback address (for example 0.0.0.0:3000) without TAPO_MCP_API_KEY set. Set an API key, or bind to a loopback address.

Snapshot link

只显示了开头部分;其余内容请在仓库中阅读