World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Breeding-scheme simulation via AlphaSimR. Needs R, AlphaSimR and libtirpc-dev on the host.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 12/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 12/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 breedsim-mcp。按照 https://mcp.popnx.com/i/musharna-breedsim-mcp.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server breedsim-mcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "breedsim": { "command": "uvx", "args": [ "breedsim-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 breedsim-mcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"breedsim": {
"command": "uvx",
"args": [
"breedsim-mcp"
]
}
}
}用 breedsim-mcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 breedsim-mcp,或回答中出现 breedsim-mcp 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
OMP_NUM_THREADS 在导入时固定为 '1',以保证 AlphaSimR 结果可复现;覆盖此值会使运行结果不确定,服务器会在每个响应中报告这一点。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 breedsim-mcp
breedsim-mcp 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 breedsim-mcp 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server breedsim-mcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user breedsim -- uvx breedsim-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 breedsim-mcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user breedsim -- uvx breedsim-mcp应能看到 breedsim-mcp 在列表中并显示已连接
用 breedsim-mcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 breedsim-mcp,或回答中出现 breedsim-mcp 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
OMP_NUM_THREADS 在导入时固定为 '1',以保证 AlphaSimR 结果可复现;覆盖此值会使运行结果不确定,服务器会在每个响应中报告这一点。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server breedsim-mcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "breedsim": { "command": "uvx", "args": [ "breedsim-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 breedsim-mcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 breedsim-mcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 breedsim-mcp,或回答中出现 breedsim-mcp 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
OMP_NUM_THREADS 在导入时固定为 '1',以保证 AlphaSimR 结果可复现;覆盖此值会使运行结果不确定,服务器会在每个响应中报告这一点。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server breedsim-mcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "breedsim": { "type": "stdio", "command": "uvx", "args": [ "breedsim-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 breedsim-mcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 breedsim-mcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 breedsim-mcp,或回答中出现 breedsim-mcp 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
OMP_NUM_THREADS 在导入时固定为 '1',以保证 AlphaSimR 结果可复现;覆盖此值会使运行结果不确定,服务器会在每个响应中报告这一点。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user breedsim -- uvx breedsim-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"breedsim": {
"command": "uvx",
"args": [
"breedsim-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"breedsim": {
"command": "uvx",
"args": [
"breedsim-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"breedsim": {
"type": "stdio",
"command": "uvx",
"args": [
"breedsim-mcp"
]
}
}
}OMP_NUM_THREADS env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 musharna 验证,该账户拥有此仓库
代码最后更新于前天
使用 GPL-3.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 breedsim-mcp@0.7.0 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/musharna-breedsim-mcp)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于前天,最新版本(0.7.0)于6天前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 breedsim-mcp | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | GPL-3.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
breedsim-mcp is an MCP server that lets AI agents run AlphaSimR breeding-program simulations. It returns the spread over replicates, never a single stochastic run, so an agent can say what a selection scheme would gain and how sure that is.
A single simulation run is not a result, and this API will not return one. Five seeds of an identical three-cycle program gave mean genetic gain [1.151, 1.841, 1.424, 1.429, 1.473], sd 0.247, on the very number being reported (measured once on AlphaSimR 2.1.0 while building v0.1.0, 2026-07-29). So run_program enforces a replicate floor and returns a per-cycle mean, sd and confidence interval. No flag collapses it to a point estimate. The interval is conditional on the session's founders: replicates rerun breeding from the same founder population, so founder-to-founder variation is not in it. To generalize, repeat over several founder seeds (recipe.interval_scope on each result says so).
This needs more than uv pip install:
libR.so)cannot find -ltirpc)R_getVar, which needs R ≥ 4.4sudo apt-get install -y r-base r-base-dev libtirpc-dev
R -e 'install.packages("AlphaSimR", repos="https://cloud.r-project.org")' uv add breedsim-mcp
Do not use a conda Python: rpy2 then fails to load libR.so with GLIBCXX_3.4.30 not found, because conda ships an older libstdc++ than the system libicuuc requires. Use a system or uv-managed interpreter. Requires mcp 2.x.
The server speaks stdio through the breedsim-mcp console script.
Claude Code
claude mcp add breedsim -- breedsim-mcp
Claude Desktop (claude_desktop_config.json):
{
"mcpServers": { "breedsim": { "command": "breedsim-mcp" } } }
If the executable is not on your PATH, or AlphaSimR lives in a user library, run it through uv and pass the library path:
{
"mcpServers": { "breedsim": { "command": "uv", "args": ["run", "--directory", "/path/to/breedsim-mcp", "breedsim-mcp"], "env": { "R_LIBS_USER": "/home/you/R/library" } } } }
Check it with list_methods(), which reports the engine versions and whether this process can currently produce reproducible results.
Claude with the server was compared with Claude writing its own AlphaSimR scripts, with R and AlphaSimR installed for it, on 34 breeding-simulation questions, 3 runs each. A tie means the server matches that result without you setting up R and AlphaSimR. Questions right in every run, server against Claude's own scripts: Claude Haiku 5.5 34 against 33, Sonnet 5.5 28 against 33, Opus 5.5 34 against 34 (re-run 2026-10-18). None is separated (pre-registered; Holm-adjusted McNemar p = 1.0 on Haiku, 0.25 on Sonnet). Sonnet's gap is runs where it answered from breeder's-equation theory instead of running the simulation. The server was cheaper with Haiku (on 26 of 34 questions) and dearer with Sonnet and Opus. Opus with no tools got 51 of 102 answers right.
The chart is the first Opus 5.5 run, keyed by AlphaSimR run directly; the best named formula lands in only 15 of 34. With this server Claude got 102 of 102 answers right, with its own R and AlphaSimR 99 of 102 (not separated, exact McNemar p = 1.0), and alone 51 of 102 (both tool setups beat it, p < 1e-6). The re-run, with an unreleased commit that cut the server's instructions and rounded its outputs, got 102 of 102 in both setups and lowered the server's median cost per answer from $0.051 to $0.033; Claude's own scripts cost $0.027, cheaper on all 34 questions (p = 1e-10). Time is not separated.
Each question spells out the AlphaSimR calls, so this tests running a stated simulation, not designing one unaided. We wrote the questions and ran the benchmark ourselves; an outside re-run is welcome. Method, controls, other limitations, and six probability questions reported separately are in benchmarks/agent_qa; the Haiku and Sonnet runs: 2026-10-20 re-run.
| Tool | Returns |
|---|---|
list_methods | engine versions, generators, selection methods, replicate floor |
found_population | session_id, founder provenance, reproducible, measured LD |
run_program | per-cycle distributions: mean, sd, 95% CI |
compare_programs | the paired difference between two programs, with a CI |
describe_session | provenance, trait architecture, cycles run |
Typical loop: found_population → run_program → read the CI and the warnings. To compare two schemes: found_population → compare_programs → read difference. run_program takes selection_method="phenotypic" or "genomic"; compare_programs takes one per arm.
docs/REFERENCE.md has the full tool signatures, example outputs, the warnings table, and the measurements behind the points below.
overlap_but_different). favours is null when the paired interval contains zero.selection_method="genomic" fits RRBLUP to a SNP chip set at founding (n_snp_per_chr). quickHaplo, the default and the only reproducible generator, has no LD, so use runMacs, which does not reproduce in a long-lived process. On this engine you cannot have both. found_population measures LD and warns (no_linkage_disequilibrium) when the markers are uninformative.OMP_NUM_THREADS=1 at import, before R starts; without it the same seed gives different results. The runMacs RNG is seeded once per R session and advances across calls, so a repeat call in this long-lived process differs (reproducible: false).h2 as a list and index_weights to select on a weighted index. trait_correlation must be a real correlation matrix (for n equally correlated traits, not below −1/(n−1)); an invalid one is refused, not replaced by the nearest valid matrix. Genomic selection fits one RRBLUP model per trait, applies the index to the estimated breeding values, and reports prediction_accuracy in each traits entry.species applies only to runMacs, which has demographic histories for GENERIC, CATTLE, WHEAT and MAIZE; anything else is refused. The default is MAIZE, but this is not a plant-only simulator.list_methods() under limits. R is a single interpreter and calls are serialized, so one oversized call would block every other. A founding is also bounded by its product n_ind × n_chr × seg_sites, through a memory budget (default 1024 MiB, set with BREEDSIM_FOUNDING_MEMORY_MIB); see docs/REFERENCE.md. For large jobs, drive AlphaSimR directly.CI installs R and compiles AlphaSimR, so the suite runs against the real engine on Python 3.11, 3.12 and 3.13. One test checks the R engine layer against the breeder's equation R = h²S (docs/EVAL.md); it does not test this server's founding or selection code against an outside reference. docs/MUTATION-CHECKS.md records 25 deliberate mutants: 24 turned a test red, and one survives because it is equivalent. tests/test_perf_ratchet.py gates each tool on exact counts of package-function calls and R evaluations, not on time.
compare_programs is single-trait: one paired verdict needs one criterion, and with several traits that is the index, for which AlphaSimR reports no gain.RRBLUP_D, _GCA and _SCA estimate dominance and combining-ability effects that the additive-only addTraitA architecture does not have.GPL-3.0-or-later, because this imports rpy2, which is GPLv2+. AlphaSimR itself is MIT. Unofficial: not affiliated with, endorsed by, or sponsored by the AlphaSimR authors, the University of Edinburgh, or the R Foundation. See NOTICE.
CHANGELOG.md records what changed and why.