World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Builds and simulates Arduino breadboard circuits in Tinkercad Circuits.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 16/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 12/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 28/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 13 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 Tinkercad Circuits MCP。按照 https://mcp.popnx.com/i/netchuu-tinkercad-circuits-mcp.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月13日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server Tinkercad Circuits MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "tinkercad-circuits": { "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Tinkercad Circuits MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"tinkercad-circuits": {
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}用 Tinkercad Circuits MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 Tinkercad Circuits MCP,或回答中出现 Tinkercad Circuits MCP 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 Tinkercad Circuits MCP
Tinkercad Circuits MCP 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 Tinkercad Circuits MCP 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Node.js(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server Tinkercad Circuits MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Tinkercad Circuits MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcp应能看到 Tinkercad Circuits MCP 在列表中并显示已连接
用 Tinkercad Circuits MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 Tinkercad Circuits MCP,或回答中出现 Tinkercad Circuits MCP 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Node.js(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server Tinkercad Circuits MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "tinkercad-circuits": { "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Tinkercad Circuits MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
用 Tinkercad Circuits MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 Tinkercad Circuits MCP,或回答中出现 Tinkercad Circuits MCP 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Node.js(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server Tinkercad Circuits MCP,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "tinkercad-circuits": { "type": "stdio", "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Tinkercad Circuits MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
用 Tinkercad Circuits MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 Tinkercad Circuits MCP,或回答中出现 Tinkercad Circuits MCP 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"tinkercad-circuits": {
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"tinkercad-circuits": {
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"tinkercad-circuits": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月20日
注册名称已通过 GitHub 账户 netchuu 验证,该账户拥有此仓库
代码最后更新于14天前
使用 MIT
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 tinkercad-circuits-mcp@0.1.0 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/netchuu-tinkercad-circuits-mcp)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于14天前,最新版本(0.1.0)于14天前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Node.js。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 Tinkercad Circuits MCP | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
An MCP server that builds Arduino circuits in Tinkercad Circuits and runs them in the simulator. You describe the circuit (which part goes in which breadboard hole, the wires, the sketch) and it appears in your Tinkercad account, wired on a breadboard, with the code saved. It can then start the simulation, press buttons, type into the Serial Monitor and tell you what the LEDs, servos and serial output did.
It works with Claude Code, Claude Desktop, Cursor, Codex and any other client that speaks the Model Context Protocol.
*examples/traffic-light.json, built and simulated by the server. The LEDs are read back from the simulator to check the order.*
I wrote it to get through a course with 70-odd Arduino lab tasks that all had to be handed in as Tinkercad designs. Building them by hand took forever.
If you found sethski/tinkercad-mcp-server first: that one works by clicking and dragging in the editor. When I tried it in November 2026 it could not create a circuit or find the breadboard in the parts panel, and it had no way of knowing which hole a leg ended up in. This server changes the editor's circuit model directly, so parts land in the holes you name, and it reads the result back and checks it in the simulator.
Not affiliated with Autodesk. Tinkercad has no public API for Circuits; this uses the editor's internals, which can change without notice. See How it works.
About 20 parts are supported: LEDs, resistors, buttons, potentiometers, servos, a piezo, the HC-SR04, TMP36, DC motors (with and without encoder), the L293D, an IR receiver, an RGB LED and a few more. The full list is in docs/parts.md.
You need Node.js 20 or newer and Google Chrome.
Install it as a plugin. That adds the MCP server and the skill in one go:
/plugin install tinkercad-circuits --marketplace netchuu/tinkercad-circuits-mcp
From a shell: claude plugin marketplace add netchuu/tinkercad-circuits-mcp and then claude plugin install tinkercad-circuits@tinkercad-circuits-mcp.
If you only want the server: claude mcp add tinkercad-circuits -- npx -y tinkercad-circuits-mcp.
In ~/.codex/config.toml:
[mcp_servers.tinkercad-circuits]
command = "npx" args = ["-y", "tinkercad-circuits-mcp"]
and the skill:
mkdir -p ~/.codex/skills/tinkercad-circuits
curl -fsSL https://raw.githubusercontent.com/netchuu/tinkercad-circuits-mcp/main/skills/tinkercad-circuits/SKILL.md -o ~/.codex/skills/tinkercad-circuits/SKILL.md
Add this to the client's MCP config: claude_desktop_config.json for Claude Desktop, ~/.cursor/mcp.json for Cursor.
{
"mcpServers": { "tinkercad-circuits": { "command": "npx", "args": ["-y", "tinkercad-circuits-mcp"] } } }
Once, whichever client you use:
npx -y tinkercad-circuits-mcp login
This opens Chrome on the Tinkercad page. Sign in the way you normally do; it is an ordinary Chrome window. It closes once you reach your dashboard. The session lives in ~/.tinkercad-circuits-mcp/profile; your password never passes through this project.
Restart your client afterwards so it picks up the server.
You can hand the setup to Claude Code or Codex:
Set up the Tinkercad Circuits MCP server from https://github.com/netchuu/tinkercad-circuits-mcp, following its README.
The agent can do everything except signing in. It should run npx -y tinkercad-circuits-mcp login and ask you to sign in in the Chrome window that opens; then, after a restart, tinkercad_status should report signedIn: true.
git clone https://github.com/netchuu/tinkercad-circuits-mcp.git
cd tinkercad-circuits-mcp npm install npm run build npm run login
and use node /full/path/to/tinkercad-circuits-mcp/dist/index.js as the command in the configs above.
Ask for a circuit in plain words:
Build a traffic light in Tinkercad: red, yellow and green LEDs on pins 10, 9 and 8, green for 5 s, yellow 2 s, red 5 s. Then run it and check the order.
Claude turns that into a spec for tinkercad_build_circuit. A smaller one, a single blinking LED, looks like this:
{
"title": "Blink an LED on a breadboard", "parts": [ { "ref": "r1", "type": "resistor", "at": "5g", "pin": "1", "angle": 90, "props": { "ohms": 220 } }, { "ref": "led1", "type": "led", "at": "9i", "pin": "anode", "angle": 180 } ], "wires": [["uno.GND1", "T-1"], ["uno.D13", "5i"], ["10h", "T-10"]], "code": "void setup() { pinMode(13, OUTPUT); }\nvoid loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); }" }
The resistor spans columns 5 to 9 in row g, the LED's anode shares column 9 and its cathode goes to the ground rail. The format is explained in docs/circuit-spec.md, and there are more complete circuits in examples/.
To check the circuit, Claude calls tinkercad_simulate:
{ "samples_ms": [500, 1500, 2500], "leds": ["led1"] }
and gets back, for each sample, whether led1 was on and the simulator clock at that moment.
| Tool | What it does |
|---|---|
tinkercad_status | Checks that the Chrome profile is signed in to Tinkercad. |
tinkercad_list_parts | Parts, pin names and settings. |
tinkercad_open_circuit | Opens a design by link or id, or creates a new one. |
tinkercad_build_circuit | Replaces the open circuit with the one in the spec and saves the code. |
tinkercad_get_circuit | Reads the saved circuit back. |
tinkercad_set_code | Replaces the sketch. |
tinkercad_set_part | Changes a part setting (knob position, sensor distance). |
tinkercad_simulate | Runs the simulator with button presses and serial input; returns LED, servo and serial readings. |
tinkercad_screenshot | Returns a picture of the editor. |
npm run smoke tells you quickly whether it still works.npm test # unit tests for the spec and catalog, no browser needed
npm run smoke # builds and simulates two circuits in your Tinkercad account npm run parts-doc # regenerates docs/parts.md
The smoke test creates a design called "tinkercad-circuits-mcp smoke test". Pass its link to reuse it: npm run smoke -- https://www.tinkercad.com/things/ .
Issues and pull requests are welcome, especially new parts. Adding one is mostly finding its device id (the data-did attribute on the tile in Tinkercad's parts panel) and its pin names; How it works has the details.
MIT