World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Byte-preserving KiCad automation: 100+ tools for schematics, PCB layout, ERC, DRC, exports
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 19/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 12/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 31/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 8 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 KiCad Tools。按照 https://mcp.popnx.com/i/productofamerica-mcp-server-kicad.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月13日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server KiCad Tools,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "kicad": { "command": "uvx", "args": [ "mcp-server-kicad" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 KiCad Tools 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"kicad": {
"command": "uvx",
"args": [
"mcp-server-kicad"
]
}
}
}用 KiCad Tools 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 KiCad Tools,或回答中出现 KiCad Tools 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 KiCad Tools
KiCad Tools 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 KiCad Tools 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server KiCad Tools,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user kicad -- uvx mcp-server-kicad 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 KiCad Tools 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user kicad -- uvx mcp-server-kicad应能看到 KiCad Tools 在列表中并显示已连接
用 KiCad Tools 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 KiCad Tools,或回答中出现 KiCad Tools 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server KiCad Tools,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "kicad": { "command": "uvx", "args": [ "mcp-server-kicad" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 KiCad Tools 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 KiCad Tools 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 KiCad Tools,或回答中出现 KiCad Tools 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server KiCad Tools,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "kicad": { "type": "stdio", "command": "uvx", "args": [ "mcp-server-kicad" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 KiCad Tools 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 KiCad Tools 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 KiCad Tools,或回答中出现 KiCad Tools 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user kicad -- uvx mcp-server-kicadClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"kicad": {
"command": "uvx",
"args": [
"mcp-server-kicad"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"kicad": {
"command": "uvx",
"args": [
"mcp-server-kicad"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"kicad": {
"type": "stdio",
"command": "uvx",
"args": [
"mcp-server-kicad"
]
}
}
}这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 ProductOfAmerica 验证,该账户拥有此仓库
代码最后更新于3天前
使用 GPL-3.0
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 mcp-server-kicad@0.21.1 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/productofamerica-mcp-server-kicad)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于3天前,最新版本(0.21.1)于30天前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 KiCad Tools | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | GPL-3.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Let an AI assistant edit real KiCad projects without corrupting them.
109 MCP tools covering schematic capture, PCB layout, symbol and footprint libraries, ERC and DRC, and manufacturing exports. No screenshots, no copy-paste, no hand-edited s-expressions: the model calls tools, KiCad files change on disk.
Quick start • What you get • Configuration • Tool reference • Requirements • Contributing
[!IMPORTANT]
Maintenance mode. As of October 2026 this project gets security fixes and KiCad compatibility fixes only. No new tools or features are planned. Existing installs keep working. Why
The plugin was built on one idea: KiCad files are large, so an AI assistant should change them through tools instead of editing the text. We tested that idea against plain Claude Code with KiCad installed and no plugin: the same model (Claude Opus 5.5), the same settings and the same tasks, each result judged by KiCad 10 itself (netlist, board, ERC and DRC).
These were small tests on one design, not a verdict on every board or every model. They were enough to stop adding tools. The test material is not published, because the design it used carries no license.
What to use instead: a coding agent such as Claude Code, with KiCad installed. Ask it to check its changes with kicad-cli (netlist export, ERC, DRC) before it finishes.
Bug reports and fixes for KiCad compatibility are still welcome.
"Add a 100 nF decoupling cap on U1's VCC pin, then check ERC."
get_pin_positions locate U1's VCC and GND pins auto_place_decoupling_cap place C3 and wire both pins to their nets run_erc report what the change broke
"Now push the netlist to the board and route it."
update_pcb_from_schematic sync footprints and pad nets onto the PCB autoroute_pcb route with Freerouting run_drc clearance, width, and unconnected checks
Every tool works on the real file, and a write changes only the bytes you asked it to. An edit that cannot be done correctly is refused with the file intact. KiCad itself writes a design file in just two places: the library upgrades, and autoroute_pcb's routed copy, a new board that leaves yours untouched.
Install the plugin. It wires up the server and ships the design skills with it:
claude plugin marketplace add ProductOfAmerica/mcp-server-kicad
claude plugin install kicad
Download kicad- .mcpb from the latest release and install it from Settings, then Extensions. Claude Desktop fetches Python and the package itself; you need KiCad installed, plus Java 25 or newer for autoroute_pcb.
Desktop does not run from your project directory, so fill in the schematic, board, and export paths it asks for. Leave the kicad-cli field blank unless KiCad is installed somewhere unusual. The design skills are Claude Code only.
pip install mcp-server-kicad
Then point your MCP client at the unified server, and name your schematic, board, and export folder in env by absolute path, so tools find them without being told on every call:
{
"mcpServers": { "kicad": { "command": "uvx", "args": ["--from", "mcp-server-kicad", "mcp-server-kicad"], "env": { "KICAD_SCH_PATH": "/path/to/project/project.kicad_sch", "KICAD_PCB_PATH": "/path/to/project/project.kicad_pcb", "KICAD_OUTPUT_DIR": "/path/to/project" } } } }
That single entry registers all 109 tools. A client that starts the server in your project's folder can leave env out: the server then takes the paths from the single .kicad_pro there (see How paths resolve). Prefer to split the tools across five smaller servers? See Configuration.
Run them as one unified server, or separately when you want a smaller tool surface in context.
| Server | Tools | What it does |
|---|---|---|
mcp-server-kicad-schematic | 42 | Schematic read/write, net tracing, ERC, exports (PDF, SVG, DXF, netlist, BOM) |
mcp-server-kicad-pcb | 34 | Board read/write, netlist import, zones, DRC, autorouting, exports (Gerber, drill, 3D, pick-and-place) |
mcp-server-kicad-project | 24 | Project scaffolding, hierarchical sheets, hierarchy validation, annotation, cross-sheet net tracing |
mcp-server-kicad-symbol | 5 | Symbol library browsing, authoring, SVG export, format upgrade |
mcp-server-kicad-footprint | 4 | Footprint library browsing, SVG export, format upgrade |
Tools alone let a model click every button. The bundled skills teach it which buttons, in what order, and what "done" looks like.
| Skill | Kicks in when |
|---|---|
using-kicad | Any electronics or EDA conversation starts. Routes to the right skill below |
circuit-design | Choosing topology, regulators, and component values, before any file exists |
schematic-plan | Planning exact placement coordinates and wiring. Pure planning, no writes |
schematic-design | Executing that plan, or modifying an existing schematic |
pcb-layout | Placing footprints, routing, zones, stackup, trace widths |
verification | ERC and DRC failures, unconnected nets, export prep |
The design skills hand their artifacts to independent reviewer subagents (agents/) before moving on, so a bad BOM or a bad placement plan gets caught before it becomes a schematic.
Five entries instead of one, when you want to load only part of the tool surface:
Five-server MCP config
{
"mcpServers": { "kicad-schematic": { "command": "uvx", "args": ["--from", "mcp-server-kicad", "mcp-server-kicad-schematic"] }, "kicad-pcb": { "command": "uvx", "args": ["--from", "mcp-server-kicad", "mcp-server-kicad-pcb"] }, "kicad-symbol": { "command": "uvx", "args": ["--from", "mcp-server-kicad", "mcp-server-kicad-symbol"] }, "kicad-footprint": { "command": "uvx", "args": ["--from", "mcp-server-kicad", "mcp-server-kicad-footprint"] }, "kicad-project": { "command": "uvx", "args": ["--from", "mcp-server-kicad", "mcp-server-kicad-project"] } } }
Give each entry the env block from Everything else, with KICAD_SYM_LIB or KICAD_FP_LIB for the library servers, unless your client starts them in the project's folder.
Each is also runnable directly:
uvx --from mcp-server-kicad mcp-server-kicad-schematic
Highest priority wins:
.kicad_pro, and the schematic, board, and library paths are derived from it.| Variable | Points at |
|---|---|
KICAD_SCH_PATH | a .kicad_sch schematic file |
KICAD_PCB_PATH | a .kicad_pcb board file |
KICAD_SYM_LIB | a .kicad_sym symbol library file |
KICAD_FP_LIB | a .pretty footprint library directory |
KICAD_OUTPUT_DIR | where exports and reports are written |
kicad-cli: ERC, DRC, exports, jobsets, get_version, the library upgrades and update_pcb_from_schematicpcbnew Python bindings: fill_zones and autoroute_pcb (which also needs Java 25 or newer; see The Freerouting download)Every other tool parses files directly and needs no KiCad.
CI covers Linux (KiCad 9 and 10), macOS and Windows (KiCad 10), and Python 3.11 to 3.14.
autoroute_pcb runs Freerouting. Unless FREEROUTING_JAR names a jar, its first call downloads Freerouting 2.5.0, freerouting-2.5.0.jar (65 MB, needs Java 25 or newer), from https://github.com/freerouting/freerouting/releases/download/v2.5.0/freerouting-2.5.0.jar and caches it as ~/.local/share/mcp-server-kicad/freerouting-2.5.0.jar (%USERPROFILE%\.local\share\mcp-server-kicad\ on Windows). Its SHA-256 is checked against the value pinned in this package before the download is saved and every time the cached copy is used. A download that does not match is not saved; a cached copy that does not match is not run, and is downloaded again.
Freerouting is run with --gui.enabled=false and --usage_and_diagnostic_data.disable_analytics=true, the settings its documentation gives for running headless and for not sending usage data, so it opens no window and its analytics stay off. When it starts, Freerouting still asks GitHub for its newest release; it has no setting to turn that off.
To skip the download, set FREEROUTING_JAR to the absolute path of a Freerouting jar you trust. That jar is used as given, with no hash check. A relative path, or one that names no file, is ignored and the download goes ahead. Earlier releases cached an unpinned freerouting.jar in the same folder; it is no longer read and can be deleted.
A stock install needs no configuration