原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

Flstudio MCP

作者:rosasynthesiz版本 1.0.0i★ 146i在你的电脑上运行代码仓库 ↗
注册名称io.github.rosasynthesiz/flstudio-mcp

安装方法

What it does

Control FL Studio with Claude: in-DAW mixing, diagnosis, routing, and composition.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度26/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分38/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 6 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 Flstudio MCP。按照 https://mcp.popnx.com/i/rosasynthesiz-flstudio-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月13日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server Flstudio MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "flstudio": { "command": "uvx", "args": [ "fl-studio-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Flstudio MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "flstudio": {
          "command": "uvx",
          "args": [
            "fl-studio-mcp"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 Flstudio MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 Flstudio MCP,或回答中出现 Flstudio MCP 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 Flstudio MCP

Flstudio MCP 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 Flstudio MCP 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server Flstudio MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user flstudio -- uvx fl-studio-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Flstudio MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user flstudio -- uvx fl-studio-mcp
  4. 在 Claude Code 中输入 /mcp

    应能看到 Flstudio MCP 在列表中并显示已连接

  5. 试一试

    用 Flstudio MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 Flstudio MCP,或回答中出现 Flstudio MCP 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server Flstudio MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "flstudio": { "command": "uvx", "args": [ "fl-studio-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Flstudio MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Flstudio MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 Flstudio MCP,或回答中出现 Flstudio MCP 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server Flstudio MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "flstudio": { "type": "stdio", "command": "uvx", "args": [ "fl-studio-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Flstudio MCP 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 Flstudio MCP 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 Flstudio MCP,或回答中出现 Flstudio MCP 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 Flstudio MCP 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user flstudio -- uvx fl-studio-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "flstudio": {
      "command": "uvx",
      "args": [
        "fl-studio-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "flstudio": {
      "command": "uvx",
      "args": [
        "fl-studio-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "flstudio": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "fl-studio-mcp"
      ]
    }
  }
}

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
56/周
连接方式
在你的电脑上运行
最新版本i
1.0.0
分类i
其他
发布到注册中心i
2026年5月27日
代码最后更新i
2026年11月18日
作者
rosasynthesiz
软件包
pypi: fl-studio-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 rosasynthesiz 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于昨天

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 fl-studio-mcp@1.0.0 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/rosasynthesiz-flstudio-mcp.svg)](https://mcp.popnx.com/en/servers/rosasynthesiz-flstudio-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20613 个服务器的 99%
  • 发布到注册中心的时间比此分类中其他 20613 个服务器的 7% 更新
  • 基础检查结果等于或优于此分类中其他 20613 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

Flstudio MCP 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于昨天,最新版本(1.0.0)于6个月前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582514个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51354个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
Flstudio MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

FL Studio MCP — control FL Studio with Claude, Cursor and other AI assistants

The MCP server for FL Studio (Fruity Loops): AI mixing, mix diagnosis, plugin control, piano roll and drum patterns, in plain language.

*Claude diagnosing and fixing a mix in FL Studio through natural language.*

Overview

flstudio-mcp is a Model Context Protocol (MCP) server that connects FL Studio to AI assistants: Claude Code, Claude Desktop, Cursor, Codex, or any other MCP client. Ask for a mix diagnosis, a vocal chain, a chord progression in a particular scale, or a full arrangement, and the assistant carries it out inside your open FL Studio project through FL's scripting API and a set of calibrated, safety-checked tools.

  • 90 tools for the mixer, plugins, piano roll, step sequencer, patterns, playlist, routing and transport
  • One-command setup on macOS, with no MIDI configuration
  • Every change can be undone, and an undo never touches a different project
  • Windows and macOS, FL Studio 2025 and 2026

It is genre- and producer-agnostic: nothing about it assumes a particular style of music.

Quickstart

macOS — one command, no MIDI setup:

uvx --from git+https://github.com/rosasynthesiz/flstudio-mcp fl-studio-mcp setup

It installs the FL controller script, then waits. Open FL Studio and load any project; the command prints Status: READY once FL answers. You do not create IAC ports and you do not touch FL's MIDI Settings: the server makes its own MIDI ports and FL links them by itself.

Then add the server to your AI client:

uvx --from git+https://github.com/rosasynthesiz/flstudio-mcp fl-studio-mcp connect

Windows — two loopMIDI ports and one step in FL (details in Setup):

:: first: in loopMIDI, create two ports named exactly "FLStudioMCP RX" and "FLStudioMCP TX"

git clone https://github.com/rosasynthesiz/flstudio-mcp.git cd flstudio-mcp scripts\install_windows.bat

Then ask Claude in plain language:

"Scan my mix and tell me what's wrong." — "Set up a vocal chain from my plugins." — "Export this arrangement to MIDI."

If something does not connect, run fl-studio-mcp doctor. It checks each stage and prints one status and the one next step.

The PyPI package (fl-studio-mcp 1.0.0) is the older v1 and does not have these commands yet; use the commands above until 2.0.0 is released.

Capabilities

Mixing & diagnosis
  • Mix Doctor — scans the whole mix and reports concrete problems (clipping, low headroom, level imbalance, missing high-pass, ungrouped related tracks, overlapping EQ boosts), each with the exact evidence and a proposed fix. Fixes are applied one at a time, only on approval, through a snapshot → write → readback → rollback safety layer. Master clipping is resolved by trimming the contributing source tracks rather than pulling the master.
  • Full-song peak watch — holds a running peak per track across playback, so level decisions are based on the loudest moment of the actual song, not a single instant.
  • Calibrated processing intents — musical EQ, compression, reverb, and delay moves mapped to real plugin parameters (native and third-party), each applied as one reversible change.
  • Level-aware compression — sets thresholds relative to a track's measured level during playback.
  • Gain staging — proposes per-track trims toward a healthy level with proper master headroom.
  • Reference match — compares your mix's level and tonal balance against a reference track.
  • Bulk track control — solo or mute a whole group (drums, vocals, …) in one step, with a one-call reset.
  • Track & channel coloring — color a track, a channel, or a whole group (drums, vocals, …) by color name or hex, reversible like every other change.
Plugin & preset control
  • Read and set plugin parameters by name, on native and third-party plugins (the parameter list is resolved live).
  • Verified writes — every parameter write is re-read on a fresh tick and retried (0.4 s apart) if FL did not take it; the answer carries verified / attempts and a hint, so a swallowed write is reported instead of echoed back as if it worked.
  • Batch parameter changes — fl_plugin_set_params sets several knobs of one plugin in a single paced burst and one undo step; fl_rollback_last_change puts them all back together.
  • Chain suggestions and preset recommendations drawn from your actual installed library — read directly from FL's plugin database and preset folders on disk, so recommendations are limited to what you own.
Composition
  • Multi-track MIDI export — generate a complete arrangement as a standard MIDI file to import.
  • Multi-pattern arrangement — create, name, clone, and mark sections.
  • Pattern control — list (paginated), select, rename, and read the length (beats/bars via the project PPQ) of any pattern; select and rename are single reversible steps with their own rollback.
  • Drum patterns in the step sequencer: read or set a channel's steps in the current pattern, e.g. x...x...x...x..., reversible like every other change.
  • Note and chord writing into the piano roll, with quantize to a grid (for new notes and existing ones).
  • Composition in any scale or mode — Western modes, pentatonic, ragas, maqam, and beyond — through the scale composer, where Claude supplies the notes for the requested scale.
Audio analysis
  • Tempo and key estimation from an audio file.
  • Melody-to-MIDI transcription (CREPE pitch tracking, with a lighter fallback).
  • Chords-to-MIDI transcription of polyphonic audio (keys, piano, guitar) with Spotify's Basic Pitch, as notes for the piano roll or a .mid file.
  • Drums to MIDI: a drum loop or stem to kick, snare, clap, closed and open hi-hat, aligned to the beat, as a .mid or straight into the step sequencer of the channels you choose (one undo step).

The server exposes 90 tools, plus 6 live resources (project, mixer, transport, channels, patterns, status) that Claude can read directly.

What sets it apart

flstudio-mcp is built as a mixing and production assistant, not only a note sender. It diagnoses and repairs a whole mix, makes decisions from real measured levels rather than guesswork, and is aware of your actual plugin and preset library when it makes suggestions. Every change that touches the project is shown before it is applied, logged, and reversible.

Limitations

These are properties of FL Studio's scripting API, stated plainly:

  • Plugins, audio files, and rendering are UI-only. FL's API cannot load a plugin, load an audio file, or render audio. The plugin and preset tools therefore *suggest* — you load the chosen plugin or preset, and Claude then configures it. Audio export is done manually (File > Export); Claude can analyze the rendered file afterward.
  • Only some plugin parameters accept arbitrary values. Levels and gains do; stepped parameters (filter types, orders, selectors) snap to their own grid steps, so an off-grid request cannot land; some parameters (Fruity Parametric EQ 2's band widths) ignore writes entirely. The parameter tools re-read and retry, then report verified: false with a hint and the value FL actually holds, instead of echoing the request as if it had landed.
  • Note writing is armed once per session. A generated pyscript writes notes into the piano roll; FL exposes no API to run a pyscript, so you run "MCP_Apply" once from the piano roll's scripting menu at the start of a session.
  • Micro-tonal and gamaka-heavy music is approximated. Scales with intervals smaller than a semitone (e.g. Arabic maqam) are rounded to the nearest semitone, and traditions built on gamaka/ornamentation (e.g. Carnatic) get the *scale framework* — the correct swaras and intervals — not gamaka or micro-tonal rendering. That's a limit of 12-tone MIDI, not of the tools.

Requirements

  • macOS or Windows 10/11 (Linux: untested, the macOS path should apply)
  • FL Studio 2025 or newer (tested on 26.1)
  • Claude Code, Claude Desktop, Cursor, Codex or any MCP client
  • Python 3.10+ (with uvx, uv brings its own)
  • Virtual MIDI ports:
  • macOS: nothing to install, the server creates them
  • Windows: loopMIDI (download)
  • Optional: ffmpeg on PATH (for MP3 analysis)

Setup

macOS
  1. Run setup:
   uvx --from git+https://github.com/rosasynthesiz/flstudio-mcp fl-studio-mcp setup

It copies the controller script into FL Studio's user-data folder (a different existing copy is kept next to it as a .bak- file), then waits for FL Studio.

  1. Open FL Studio and load any project. If FL was already open, restart it once. Setup prints Status: READY when FL answers.
  2. Add the server to your client: run ... fl-studio-mcp connect and paste the entry it prints (Claude Code, Claude Desktop, Cursor, Codex).

That is all. How it works: the server creates two virtual MIDI ports that share one name, FLStudioMCP. The controller script lists that name as its supported device, so FL links the script, pairs input and output on one port number and enables them without any clicks. FL has to see the ports when it starts the first time; after that it re-attaches by itself.

Working from a clone instead: ./scripts/install_macos.sh does the same inside a private .venv in the repo (your system Python is not touched).

Already using IAC Driver ports named FLStudioMCP RX / FLStudioMCP TX? They keep working and are used first. FLSTUDIO_MCP_VIRTUAL_PORTS=0 stops the server from creating its own ports.

Windows

Windows cannot create MIDI ports from a program, so loopMIDI is still needed.

  1. Create two loopMIDI ports named exactly FLStudioMCP RX and FLStudioMCP TX:
  • Install and open loopMIDI.
  • Remove default ports (loopMIDI Port, …); those names are not detected.
  • Type FLStudioMCP RX in New port-name, click +. Repeat for FLStudioMCP TX.
  • Keep loopMIDI running (it can start with Windows).
  1. Install:
   git clone https://github.com/rosasynthesiz/flstudio-mcp

cd flstudio-mcp scripts\install_windows.bat

   The server goes into a `.venv` folder inside the repo, using Python

3.12/3.11/3.10 when available. The installer prints the full paths of the commands. It finds your Documents folder even when it is redirected (OneDrive, non-English names) and follows FL's own "User data folder" setting; if it still cannot find the folder, run setx FL_SETTINGS " \FL Studio\Settings" once and open a new terminal.

  1. Configure FL Studio once — Options > MIDI Settings:
  • Input list: select FLStudioMCP RX, turn on Enable, set Controller type to FLStudioMCP, and give it a Port number.
  • Output list: select FLStudioMCP TX and give it the same Port number.
  1. Check: .venv\Scripts\fl-studio-mcp.exe doctor should print Status: READY.
  2. Add the server to your client: .venv\Scripts\fl-studio-mcp.exe connect prints the entry, with the full path already filled in.
Both platforms

No daemon to start. The first MCP server that starts owns the MIDI ports and shares them on a local socket; a second client joins it automatically. The standalone daemon (`fl-studio-mcp-dae

只显示了开头部分;其余内容请在仓库中阅读