World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Transparent MCP proxy that independently re-verifies tool-call claims before the Host trusts them.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 12/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 12/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 verimcp。按照 https://mcp.popnx.com/i/rudranaresh0201-verimcp.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月13日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server verimcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "verimcp": { "command": "uvx", "args": [ "verimcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 verimcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"verimcp": {
"command": "uvx",
"args": [
"verimcp"
]
}
}
}用 verimcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 verimcp,或回答中出现 verimcp 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 verimcp
verimcp 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
A · 使用能连接 verimcp 的应用
B · 其他 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server verimcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user verimcp -- uvx verimcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 verimcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user verimcp -- uvx verimcp应能看到 verimcp 在列表中并显示已连接
用 verimcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 verimcp,或回答中出现 verimcp 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server verimcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "verimcp": { "command": "uvx", "args": [ "verimcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 verimcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 verimcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 verimcp,或回答中出现 verimcp 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server verimcp,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "verimcp": { "type": "stdio", "command": "uvx", "args": [ "verimcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 verimcp 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --versionMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version
安装一次,所有需要 uv 的工具都能用
用 verimcp 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 verimcp,或回答中出现 verimcp 的工具名称,就表示连接成功
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user verimcp -- uvx verimcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"verimcp": {
"command": "uvx",
"args": [
"verimcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"verimcp": {
"command": "uvx",
"args": [
"verimcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"verimcp": {
"type": "stdio",
"command": "uvx",
"args": [
"verimcp"
]
}
}
}这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日
注册名称已通过 GitHub 账户 rudranaresh0201 验证,该账户拥有此仓库
代码最后更新于14天前
使用 MIT
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 verimcp@0.2.2 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/rudranaresh0201-verimcp)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于14天前,最新版本(0.2.2)于3个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 本项 verimcp | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 许可证 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
Listed on the official MCP Registry as io.github.rudranaresh0201/verimcp and io.github.rudranaresh0201/devmcp.
[Watch the console →](https://verimcp-console.onrender.com) — a recorded session replaying in the browser: three verified calls, five caught lies, one honest backend error.
MCP tool calls are trusted by default, in two different ways that both bite in production agent workflows:
isError: false only means the tool didn't crash, not that it did what it claimed. An agent wired up to git, CI, or infrastructure through MCP is one confidently-wrong tool response away from acting on a lie.tools/call after an ambiguous response (a timeout, a dropped connection), nothing in MCP stops the backend from just running it again — a second commit, a second CI run, a second charge. The protocol has no concept of "didn't I already do this?"`verimcp` is a transparent proxy that sits between an MCP Host and a backend server and forwards every message unchanged, except for two independent checks around each call:
--idempotent-replay, see Proof below.`devmcp` is the backend it's proven against — a real git/CI MCP server, deliberately built with the full protocol surface (tools, resources, prompts, roots, sampling), because a proxy is only as convincing as what it's shown catching.
Host <--stdio--> verimcp (pre-check: dedupe retries + post-check: verify claims) <--stdio--> devmcp (git/CI server)
Both are independently installable and have no import dependency on each other — verimcp works in front of *any* MCP backend (proven against the official mcp-server-git too, not just devmcp), and devmcp works with any Host directly, unproxied.
Two runnable benchmarks, real subprocess pipes, no mocks — the numbers below are what they actually print, gaps included:
pip install verimcp devmcp-server
python scripts/benchmark_claim_acceptance.py # does verimcp catch a lying backend? python scripts/benchmark_retry_duplication.py # does --idempotent-replay stop a retry from duplicating a side effect?
Claim-acceptance — a real MCP Host with no verification layer accepts 100% of fabricated results by construction; that's not a benchmark artifact, it's the actual gap in the protocol:
RAW claim-acceptance rate: 14/14 (100%)
verimcp claim-catch rate: 11/14 (79%)
The 79%, not 100%, is deliberate and stated in the script's own output: 3 of the 14 scenarios exploit documented, principled gaps in specific verifiers (e.g. a hash-exists check can't tell *this* call created the hash vs an old one) — named plainly rather than hidden, because a tool claiming a perfect score on its own benchmark is the real red flag.
Retry-duplication — same idea applied to --idempotent-replay, against 5 realistic non-idempotent side effects (a counter bump, a notification send, an invoice increment, an audit entry, a two-step pipeline):
RAW duplicate-action rate: 5/5 (100%)
verimcp duplicate-action rate: 0/5 (0%)
scripts/demo.py is the smaller, narrative version of the same proof — one fabricated commit hash caught, one real write confirmed and passed through unchanged. tests/test_adversarial_corpus.py and tests/test_proxy_integration.py run the same claims through the real proxy pipe in CI on every commit, not just on demand.
write_file (disk hash-compare), git_commit/git_branch (re-derived from real git state), run_ci_pipeline (self-consistency + re-execution of steps marked safe to re-run), plus resource reads (repo://status, repo://log, repo://file/{path}). New verifiers are a plugin system (importlib.metadata.entry_points, the same mechanism pytest/Black use) — see docs/writing-a-verifier.md.create_pull_request, issue_write (create) and create_branch from GitHub's official MCP server are checked against GitHub's own REST API: the PR/issue/branch must exist *and* carry the title that was requested, which also catches a server handing back a real, older PR as if it were new. A 404 only counts once the repo is confirmed visible, so a private repo without a token is left unchecked rather than falsely flagged.--receipts, on by default under wrap) — every check records what it actually observed (a PR's real title and link, a commit's real message and author, a file's real hash), where it looked and when, for claims that held as well as ones that didn't. Written to the audit log and console always, appended to the tool reply with the flag.--backend-url) — fronts a server over Streamable HTTP (MCP spec 2025-06-18: JSON and SSE replies, session ids, protocol-version header), with --header 'Authorization: Bearer ${TOKEN}' / --header-from-env so a secret never has to live in a config file or a command line. Checked against a hosted server (DeepWiki) as well as the test suite.mcp-server-git.--idempotent-replay) — a retried tools/call is only ever answered from cache if the *previous* identical call was independently verified true by the checks above; a key match with no prior verified success is a cache miss, not a false dedupe. Adapted from arXiv:2608.02645, moved to the proxy layer so it works for any Host/backend pair verimcp fronts, not just one agent framework's own retry wrapper.elicitation/create).verimcp://audit MCP resource; verimcp replay re-runs recorded traffic against a new policy to backtest "would this have changed anything."Deeper design reasoning (why prompts/roots get no verifier on principle, why policy is a separate concept from verification, etc.) lives in docs/adr/ for anyone who wants to go that deep — the summary above is everything needed to use or evaluate the project.
Fastest: protect the MCP servers you already have (0.4.0, not yet on PyPI — install from GitHub until it is):
pip install "verimcp[dashboard] @ git+https://github.com/rudranaresh0201/mcp"
verimcp wrap # puts verimcp in front of every server in Claude Code, Claude Desktop and Cursor verimcp-dashboard --audit-log ~/.verimcp/audit.jsonl # watch every verdict live at http://127.0.0.1:8787
Restart your MCP app and keep using it in plain English. wrap backs up each config file first, skips servers it can't safely front (ones that sign in through the app's own OAuth flow, legacy SSE), never puts a header token into command-line arguments, and verimcp unwrap restores the originals exactly. --dry-run shows the plan without writing anything.
What it looks like, from a real run through the official mcp-server-git and a deliberately lying file server:
[verimcp receipt] CONTRADICTED · FilesystemVerifier
todo.txt does not exist on disk
[verimcp receipt] VERIFIED · GitServerCommitVerifier commit b6fcbbd50b11 exists: 'Add hello file' by Rudra
As a user — install straight from PyPI:
pip install verimcp devmcp-server
verimcp -- devmcp --repo-path ./some-repo
Note on names: the PyPI distribution is
devmcp-server(devmcpwas blocked by
PyPI's typosquat-similarity check against an unrelated existing package), but the
Python import and CLI command are both still plain
devmcp— nothing above changes
if you're reading devmcp's own source.
Use it with Claude Desktop, Claude Code, or Cursor — after pip install, add devmcp as an MCP server the normal way, just point its command at verimcp instead of devmcp directly:
{
"mcpServers": { "devmcp": { "command": "verimcp", "args": ["--root", "/path/to/your/repo", "--", "devmcp", "--repo-path", "/path/to/your/repo"] } } }
claude_desktop_config.json (macOS: ~/Library/Application Support/Claude/claude_desktop_config.json, Windows: %APPDATA%\Claude\claude_desktop_config.json).claude mcp add devmcp -- verimcp --root /path/to/your/repo -- devmcp --repo-path /path/to/your/repoFrom then on your assistant sees write_file, git_commit, git_branch, run_ci_pipeline, sqlite_*, and docker_* as normal tools — no prompting change needed — except every claim those tools make gets independently re-checked before the assistant is told it succeeded.
In Docker — no local Python/git needed:
docker build -t verimcp-devmcp .
docker run -i -v /path/to/your/repo:/repo verimcp-devmcp
As a contributor — editable installs from this repo:
pip install -e ".[dev]"
pip install -e "./devmcp[dev]"
pytest tests devmcp/tests # 138 tests, real subprocess + real git repo, nothing mocked ruff check src tests devmcp/src devmcp/tests
python scripts/inspector_smoke_test.py # verify against the real MCP Inspector client (needs node/npx)
# spans/metrics print to stderr (verimcp's stdout is the live MCP protocol channel)
verimcp --otel-exporter console -- devmcp --repo-path ./some-repo
pip install "verimcp[otel]" verimcp --otel-exporter otlp --otel-endpoint localhost:4317 -- devmcp --repo-path ./some-repo
Omitting --otel-exporter entirely means zero telemetry overhead — the default, same as every other opt-in flag here.
The console read