What it does
Drive AMD Vivado from AI assistants, with Red Pitaya STEMlab 125-14 build and deploy flows.
- Connects 在你的电脑上运行
- Account or key No key needed
- Category 开发者工具
可搭配使用
教 AI 做这类工作的 Skill,可与本项一起使用
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
为什么排在这里
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 12/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 12/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
安装
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 Vivado Red MCP。按照 https://mcp.popnx.com/i/sinemortal-vivado-red-mcp.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
让 AI 帮你安装
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server Vivado Red MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "vivado-red": { "command": "uvx", "args": [ "vivado-red-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Vivado Red MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
安装 uv(如果还没有)
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --version- 显示版本号(例如 uv …)= 已安装,可跳过这一步
- 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
怎么打开终端
Mac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号:
uv --version安装一次,所有需要 uv 的工具都能用
打开电脑版 Claude 应用的设置文件
SettingsDeveloperEdit Config
粘贴这些设置并保存文件
{ "mcpServers": { "vivado-red": { "command": "uvx", "args": [ "vivado-red-mcp" ] } } }退出 Claude 再重新打开
试一试
用 Vivado Red MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 Vivado Red MCP,或回答中出现 Vivado Red MCP 的工具名称,就表示连接成功
1 项可选设置(不填也能用)
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
VIVADO_MCP_NO_AUTOFETCH设置为 1 可跳过启动时下载 RedPitaya-FPGA 仓库。查看英文原文
Set to 1 to skip downloading the RedPitaya-FPGA repo on startup
说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 Vivado Red MCP
Vivado Red MCP 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
你可以改用这些方式
A · 使用能连接 Vivado Red MCP 的应用
- 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
- 需要先在电脑上安装 Python (uv)(只需一次)
- 需要先在电脑上安装 Python (uv)(只需一次)
- 需要先在电脑上安装 Python (uv)(只需一次)
B · 开发者工具 类中能连接 ChatGPT 的其他服务器
从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
让 AI 帮你安装
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server Vivado Red MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user vivado-red -- uvx vivado-red-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Vivado Red MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
安装 uv(如果还没有)
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --version- 显示版本号(例如 uv …)= 已安装,可跳过这一步
- 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
怎么打开终端
Mac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号:
uv --version安装一次,所有需要 uv 的工具都能用
打开终端
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
粘贴这条命令并按 Enter
claude mcp add --scope user vivado-red -- uvx vivado-red-mcp在 Claude Code 中输入 /mcp
应能看到 Vivado Red MCP 在列表中并显示已连接
试一试
用 Vivado Red MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 Vivado Red MCP,或回答中出现 Vivado Red MCP 的工具名称,就表示连接成功
1 项可选设置(不填也能用)
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
VIVADO_MCP_NO_AUTOFETCH设置为 1 可跳过启动时下载 RedPitaya-FPGA 仓库。查看英文原文
Set to 1 to skip downloading the RedPitaya-FPGA repo on startup
说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
让 AI 帮你安装
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server Vivado Red MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "vivado-red": { "command": "uvx", "args": [ "vivado-red-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Vivado Red MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
安装 uv(如果还没有)
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --version- 显示版本号(例如 uv …)= 已安装,可跳过这一步
- 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
怎么打开终端
Mac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号:
uv --version安装一次,所有需要 uv 的工具都能用
在 Cursor 中以 Agent 模式打开 AI 聊天
试一试
用 Vivado Red MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 Vivado Red MCP,或回答中出现 Vivado Red MCP 的工具名称,就表示连接成功
1 项可选设置(不填也能用)
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
VIVADO_MCP_NO_AUTOFETCH设置为 1 可跳过启动时下载 RedPitaya-FPGA 仓库。查看英文原文
Set to 1 to skip downloading the RedPitaya-FPGA repo on startup
说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Python (uv)(只需一次)
让 AI 帮你安装
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server Vivado Red MCP,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "vivado-red": { "type": "stdio", "command": "uvx", "args": [ "vivado-red-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 Vivado Red MCP 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
安装 uv(如果还没有)
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
uv --version- 显示版本号(例如 uv …)= 已安装,可跳过这一步
- 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
怎么打开终端
Mac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载
装好后关掉终端再打开,重新运行同一条命令,应显示版本号:
uv --version安装一次,所有需要 uv 的工具都能用
在 VS Code 中以 Agent 模式打开 AI 聊天
试一试
用 Vivado Red MCP 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 Vivado Red MCP,或回答中出现 Vivado Red MCP 的工具名称,就表示连接成功
1 项可选设置(不填也能用)
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
VIVADO_MCP_NO_AUTOFETCH设置为 1 可跳过启动时下载 RedPitaya-FPGA 仓库。查看英文原文
Set to 1 to skip downloading the RedPitaya-FPGA repo on startup
说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
开发者专用:终端命令和 JSON 设置
安装在电脑上
Claude Code
claude mcp add --scope user vivado-red -- uvx vivado-red-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"vivado-red": {
"command": "uvx",
"args": [
"vivado-red-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"vivado-red": {
"command": "uvx",
"args": [
"vivado-red-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"vivado-red": {
"type": "stdio",
"command": "uvx",
"args": [
"vivado-red-mcp"
]
}
}
}需要你填写的值
VIVADO_MCP_NO_AUTOFETCHenv设置为 1 可跳过启动时下载 RedPitaya-FPGA 仓库。查看英文原文
Set to 1 to skip downloading the RedPitaya-FPGA repo on startup
说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
一览
哪些应用可以使用它
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它能做什么
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
基础检查i
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月18日
- ✓ 通过
作者与仓库一致
注册名称已通过 GitHub 账户 sinemortal 验证,该账户拥有此仓库
- ✓ 通过
仍在维护
代码最后更新于16天前
- ✓ 通过
有许可证
使用 MIT
- – 不适用
端点有响应
它在你的电脑上运行,没有互联网端点
- – 不适用
使用 OAuth 登录
在你的电脑上运行,改用本地设置
- … 尚未检查
工具描述中没有隐藏指令
它在你的电脑上运行;我们只能读取互联网端点的工具列表
已公开的漏洞(OSV.dev)
OSV.dev 中没有 vivado-red-mcp@0.5.0 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/sinemortal-vivado-red-mcp)讨论
提问、分享技巧或报告无法使用。按“有帮助”数量排序。
用户评价
还没有评价
与“开发者工具”中的其他服务器比较i
- 星标数多于此分类中其他 6083 个服务器的 0%
- 发布到注册中心的时间比此分类中其他 6083 个服务器的 63% 更新
- 基础检查结果等于或优于此分类中其他 6083 个服务器的 99%
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
常见问题
Vivado Red MCP 安全吗?
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
它需要哪些密钥或代码?
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在我的电脑上运行还是在云端?
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
它还在维护吗?
GitHub 仓库最后更新于16天前,最新版本(0.5.0)于16天前进入注册中心。
哪些应用可以使用它?
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。
有什么可以替代它?
同一分类中有:GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
功能相近的其他选择
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| 本项 Vivado Red MCP | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 在云端运行,无需安装 | 云端或安装在电脑上都可以 |
| 需要密钥 | 否 | 否 | 否 | 否 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 是 | 否 | 否 |
| 基础检查 | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| 许可证 | MIT | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
作者的 README
打开 README
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
vivado-red-mcp — Vivado MCP server, Red Pitaya edition
An MCP server that lets an AI assistant such as Claude drive AMD/Xilinx Vivado directly: create projects, build block designs, synthesize, implement, simulate, read timing/utilization reports and generate bitstreams — without opening the Vivado GUI.
It has first-class support for the Red Pitaya STEMlab 125-14 (Zynq xc7z010clg400-1): you can go from a natural-language description to a .bit.bin running on the board, using either pure RTL or the official RedPitaya-FPGA PS+PL (ARM + FPGA) backbone, and deploy it over SSH.
Forked from coreyhahn/vivado_mcp and
heavily extended (93 tools): block design / IP Integrator, IP catalog, Hardware
Manager, advanced reports, Red Pitaya RTL and PS+PL flows, SSH deploy.
Current version: 0.5.0 — see What's new and CHANGELOG.md.
Not to be confused with the unrelated
vivado-mcppackage on PyPI. This project is
vivado-red-mcp: Python modulevivado_red_mcp, commandvivado-red-mcp.
Contents
- What it can do
- Tested with
- Requirements
- Installation
- First steps
- Red Pitaya
- What's new in 0.5.0
- Troubleshooting
- Available tools
- Architecture
- License
What it can do
- Persistent Vivado session — one Vivado process in Tcl mode is kept alive, so commands don't pay the 20–30 s startup each time.
- Projects and design flow — create/open projects, add HDL and XDC files, synthesis, implementation, bitstream, run strategies.
- Block design (IP Integrator) — ports, IP cores, RTL module cells, nets, PS7 presets, validation, wrapper generation.
- Reports — timing (WNS/TNS/WHS/THS), utilization, clocks, power, DRC, methodology, QoR; returned as parsed values, not just raw text.
- Simulation (xsim) — behavioral and post-synthesis/implementation, read signal values, breakpoints.
- Red Pitaya — one-shot RTL build, full PS+PL build from the official RedPitaya-FPGA repo, bundled board constraints,
.bit.bingeneration, SSH deploy. - Raw Tcl — anything not covered by a tool can be run as Tcl (multi-line scripts supported).
Tested with
| Status | |
|---|---|
| Vivado 2026.1, Windows 11 | Validated end-to-end in 0.4.0: session, RTL and PS+PL Red Pitaya builds, reports, behavioral + post-synthesis xsim, block design, RedPitaya-FPGA tutorials (see below) |
| Vivado 2020.1, Linux | Original development target (0.3.x). Not re-tested on 0.4.0 |
| Other Vivado releases | Expected to work (the generic tools use standard Tcl); not tested |
| Red Pitaya board | STEMlab 125-14 (Z10) only for the Red Pitaya flows |
| Python | 3.10 – 3.12 |
| MCP Python SDK | 1.x only (mcp>=1.0,<2, pinned automatically) |
The RedPitaya-FPGA tutorials in prj/Examples (Led_blink, Knight_rider, Stopwatch, Frequency_counter) build to a bitstream through the server. Led_blink and Knight_rider rebuilt from scratch with MCP tools only produce byte-identical bitstreams to the tutorials' own scripts.
Requirements
- Python 3.10+
- AMD Vivado (the free edition is enough for the Red Pitaya
xc7z010). When installing, you only need *Vivado* and, under devices, *SoCs → Zynq-7000*; Vitis Model Composer and DocNav are not needed. - A Vivado license file — also for the free edition on 2025.x/2026.x. Without it Vivado refuses to start (
a valid license was not found):
- open the Vivado License Manager (
/bin/vlm.baton Windows,vlmon Linux); - *Obtain License* → on the AMD site tick Vivado Basic Tier License, Node Locked License (no charge, no expiry) → *Generate Node-Locked License*;
- host ID: the MAC address of your network card (shown under *View Host Information*). The license is tied to the PC, not to the network you use;
- load the received
Xilinx.licwith *Load License → Copy License*.
- Vivado reachable by the server, either:
- on
PATH(Linux:source /settings64.sh; Windows: add\bintoPATH), or - by telling Claude the full path, which it passes to
start_session(e.g.C:\AMDDesignTools\2026.1\Vivado\bin\vivado.bat).
pexpect (Linux/macOS) or pywinpty (Windows) is installed automatically.
Installation
1. Get the code and install it
git clone https://github.com/sinemortal/vivado-red-mcp.git
cd vivado-red-mcp python -m venv .venv
Windows: .venv\Scripts\activate
Linux/macOS: source .venv/bin/activate
pip install -e .
pip pins the MCP SDK to 1.x by itself. Do not upgrade mcp to 2.x: the server would not start ('Server' object has no attribute 'list_tools').
2. Register it with Claude Code
Once, for all your projects:
claude mcp add --transport stdio --scope user vivado -- vivado-red-mcp
If vivado-red-mcp is not on PATH when Claude Code starts (typical with a virtual environment), point to the venv's Python instead:
# Windows
claude mcp add --transport stdio --scope user vivado -- "C:\path\to\vivado-red-mcp\.venv\Scripts\python.exe" -m vivado_red_mcp
Linux/macOS
claude mcp add --transport stdio --scope user vivado -- /path/to/vivado-red-mcp/.venv/bin/python -m vivado_red_mcp
Or share it with a single project through a .mcp.json at the project root:
{
"mcpServers": { "vivado": { "type": "stdio", "command": "vivado-red-mcp" } } }
Check it with claude mcp list: vivado should show as connected.
3. Optional: disable the RedPitaya-FPGA auto-download
On startup the server downloads the RedPitaya-FPGA repo (source zip) into its working directory if it is missing, for the PS+PL flow. Set the environment variable VIVADO_MCP_NO_AUTOFETCH=1 to turn this off; the rp_fetch_repo tool can still download it on demand.
First steps
Talk to Claude in plain language, for example:
- "Start a Vivado session" (add the path if Vivado is not on
PATH) - "Open my project at
C:/work/my_proj/my_proj.xpr" - "Synthesize and implement it, then tell me if timing is met"
- "Show me the resource utilization"
- "Generate the bitstream"
- "Stop the Vivado session"
Claude picks the tools; you never have to call them by name.
Red Pitaya
Two flows, depending on whether you need the ARM processor:
| Flow | Tool | Use it for |
|---|---|---|
| RTL only (no PS7) | create_redpitaya_project_rtl | Logic clocked by the 125 MHz ADC clock: LEDs, counters, expansion-connector GPIO. One call does create → sources → XDC → synth → impl → bitstream → .bit.bin |
| PS + PL | rp_fetch_repo → rp_setup_workspace → rp_build_project | Designs that need the ARM, DDR or AXI. Reuses the PS7 block design shipped by RedPitaya-FPGA instead of reconfiguring the Zynq by hand |
Example prompt:
Make an LED blinker at 1 Hz for the Red Pitaya using the 125 MHz ADC clock on
led_o[0], build it and give me the.bit.bin.
To load the result on the board, ask Claude to use deploy_to_redpitaya (SSH, default credentials root/root; works with OS 1.04 xdevcfg and OS 2.00 fpgautil), or copy it yourself:
scp led_blinker.bit.bin root@rp-xxxxxx.local:/tmp/
ssh root@rp-xxxxxx.local 'cat /tmp/led_blinker.bit.bin > /dev/xdevcfg'
PS+PL and the RedPitaya-FPGA repo. The current upstream master targets Vivado 2025.1; older checkouts targeted 2020.1. Both layouts are supported. rp_setup_workspace copies the repo into a separate workspace and patches only that copy, so the scripts run on the Vivado you have installed (their exported block-design/IP scripts otherwise refuse any other release) and without a git checkout. Your downloaded repo is never modified. Details: get_vivado_doc redpitaya_ps_pl_flow.
Bundled board data (data/boards/):
red_pitaya_125_14_full.xdc— full pinout (ADC, DAC, LEDs, expansion connector, XADC), port names as in the officialred_pitaya_top(adc_dat_ich,dac_dat_o,exp_p_io, …); checked pin by pin against upstreamsdc/red_pitaya.xdc.red_pitaya_125_14_leds_min.xdc— 125 MHz differential ADC clock + 8 LEDs, for hello-world designs.red_pitaya_125_14_info.json— part number and board metadata.
The RedPitaya tutorials (prj/Examples) use different port names (adc_dat_a_i, adc_clk_p_i, …) and a PS7 preset (cfg/red_pitaya.xml); use their own cfg/ files when rebuilding them.
More Italian prompt examples and the step-by-step low-level flow: USAGE.md.
What's new in 0.5.0
Renamed to `vivado-red-mcp` (package, Python module vivado_red_mcp, command vivado-red-mcp), so it no longer clashes with the unrelated vivado-mcp package on PyPI. If you installed an earlier version, reinstall it and re-register it with Claude Code using the new command (see Installation).
0.4.0
Works on Vivado 2026.1 and with the current RedPitaya-FPGA repo.
Fixed:
- Server failed to start with MCP SDK 2.x → SDK pinned to 1.x.
- Simulation never worked when the server was started by Claude Code on Windows (xsim:
Spawn failed) → fixed. - Multi-line Tcl sent through
run_tclwas silently corrupted on Windows → fixed. get_timing_summaryalways returned empty values;get_utilizationmisread newer reports → both parse current Vivado output.- Reports right after a build failed with no message (
No open design) → the latest completed run is opened automatically. get_synthesis_errors_parsedalways returned 0 errors → now reads the run logs, including failed IP runs.launch_simulationmodes rejected by recent Vivado → fixed.generate_bitstreamtimed out after 300 s and didn't check the result → now verified, returns the.bitpath.- Missing license (or any startup failure) now reports Vivado's own message in seconds instead of a generic error after 2 minutes.
- Bundled `red_pitaya_125_14_full.xdc` had 6 wrong pins (ADC channel A MSB and
dac_dat_o[8..12]) → corrected. - PS+PL flow broken by the new RedPitaya-FPGA layout → both layouts supported.
New tools: create_bd_port, add_module_to_bd, configure_bd_cell, set_run_strategy. Full list in CHANGELOG.md.
Troubleshooting
| Symptom | Cause / fix |
|---|---|
start_session fails with valid license was not found | Vivado 2025.x/2026.x needs a license file even for the free edition — see Requirements |
start_session cannot find Vivado | Put /bin on PATH or give Claude the full path of vivado.bat / vivado |
Server does not start: 'Server' object has no attribute 'list_tools' | MCP SDK 2.x installed. Run pip install "mcp>=1.0,<2" |
claude mcp list shows vivado as failed | vivado-red-mcp not on PATH for Claude Code: register it with the venv's Python (see Installation) |
A RedPitaya example fails synthesis with red_pitaya_pll ... port does not exist | Upstream issue in prj/Examples/Simple_moving_average (it pulls in rtl_250), not in this server |
Occasional Could not open 'C' for writing in an IP run | Intermittent Vivado issue with parallel out-of-context runs; re-run synthesis |
| Long paths on Windows | Keep projects in short paths; Vivado and IP generation hit the 260-character limit |
Available tools
Session management
start_session- Start a persistent Vivado Tcl session (optionalvivado_path)stop_session- Stop the Vivado sessionsession_status- Session statisticscheck_session_health- Detect a hung/dead session, optionally recover
-