原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。评价和账户功能将在后续阶段推出。
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

TransitRadar — UK trains and buses

作者:transitradar.co.uk版本 1.4.0i★ –i在云端运行
注册名称uk.co.transitradar/transitradar

安装

概览

作者提供的说明(英文原文)

Live UK rail boards, journey planning, train history, units, lifts, disruptions, punctuality.

PopNx MCP 的三大支柱

这三项永远不会合并成一个分数:意见、测量和人气是不同的东西。

它能帮你做什么

我们还没有为它写通俗的介绍。下面是我们从注册中心读取到的事实。

安装

选择你使用的 AI 应用,然后复制设置。

安装之前

你需要

你用的是哪个应用?

在上方选择你的应用。我们会记住它,下次按钮会显示“安装到 …”。

适用于网页版、桌面版和手机版 Claude:

  1. 打开 Settings → Connectors
  2. 点击 Add custom connector
  3. 粘贴下面的地址,然后点击 Add
  4. 如果要求登录,请登录作者的服务
SettingsConnectors1+ Add2https://…3
https://transitradar.co.uk/mcp

在终端中运行这条命令

claude mcp add --transport http transitradar https://transitradar.co.uk/mcp

在 Cursor 中打开

或者自己复制设置

粘贴到项目中的 .cursor/mcp.json,或 ~/.cursor/mcp.json

{
  "mcpServers": {
    "transitradar": {
      "url": "https://transitradar.co.uk/mcp"
    }
  }
}

浏览器会先询问是否打开应用,然后应用会显示设置并请你确认。密钥的值会留空,由你自己填写。

在 VS Code 中打开

或者自己复制设置

粘贴到项目中的 .vscode/mcp.json

{
  "servers": {
    "transitradar": {
      "type": "http",
      "url": "https://transitradar.co.uk/mcp"
    }
  }
}

浏览器会先询问是否打开应用,然后应用会显示设置并请你确认。密钥的值会留空,由你自己填写。

ChatGPT 只能连接互联网上的服务器:

  1. 打开网页版 ChatGPT → Settings → Connectors (Apps)
  2. 点击 Create 或 Add(部分套餐需要先在 Advanced 中开启 Developer mode)
  3. 粘贴下面的地址,起个名字,然后保存
  4. 如果要求登录,请登录作者的服务
SettingsConnectors1+ Create2https://…3
https://transitradar.co.uk/mcp

菜单名称可能因套餐和版本不同而略有差异。

你的选择通过 Cookie 保存在这台设备上,无需账户。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

它能做什么

工具名称和描述与服务器在 2026年11月7日 报告的完全一致。这些内容由作者撰写,不是我们写的;我们以纯文本形式显示。

  • plan_journey

    Plan a GB rail journey between two stations from the timetable, including changes: the next few ways to get there after a time, each with departure, arrival, number of changes and every train to catch with where to board and alight. This is the timetable, not live running; for li

  • bus_performance

    Today's bus punctuality estimate for Great Britain, nationally and by operator: journeys counted, the share on time, early and late, and the average delay. Each bus journey is counted once, judged on arrival near its last stop, and only in the roughly 25 urban areas we sample, so

  • late_trains

    GB passenger trains running late right now, and trains booked to be running now that are cancelled (wholly or part of the way). Each train has its route, how late it is, where it last reported, where it calls next, the reason Darwin gives, and a Delay Repay link once a claim is w

  • disruptions

    Current GB rail incidents and planned engineering work from National Rail's KnowledgeBase: what is affected, the operators, the dates and a link to National Rail's notice. Optionally filter by operator (name or two-letter code) or by any text, such as a station, line or reason.

  • train_history

    How one timetabled train has actually run over recent days, by its planning ID (from find_train, station_departures or get_train): each day's delay at its final destination, cancellations and any reason given, plus the share on time. Delay is measured where the train ends, not at

  • get_train

    Full details of one train by its planning ID (UID, e.g. 'C04207'): every public calling point with booked, expected and actual times, platforms and per-stop cancellations, plus — for today's trains — where it was last reported and how late. A cancellation can apply to only some s

  • bus_stop_departures

    Next buses from a bus stop anywhere in Great Britain. Takes a stop name with its town or area; many stops share a name across the country, so 'Trafalgar Square' alone can land in Greater Manchester while 'Trafalgar Square London' finds Charing Cross. A stop letter can follow, e.g

  • station_info

    Details of a GB railway station: address, managing operator, facilities, step-free access, industry codes (CRS, TIPLOC, STANOX, NLC) and, where Network Rail publishes it, the live status of each public lift. Lift status is 'In service', 'Out of service' or 'Data not available'; t

  • station_departures

    Live departure or arrival board for a GB railway station, from National Rail's Darwin feed: booked time, expected time, actual time once reported, platform, operator and any delay or cancellation reason. With 'to', only trains that also call at that station are listed, each with

  • daily_performance

    TransitRadar's own record of one completed day on GB passenger rail: how many trains ran, how many were cancelled, the share of recorded arrivals within five minutes at their destination, the same share counting each cancellation as a failure, per-operator figures, and the common

  • bus_disruptions

    Current and planned bus disruptions in Great Britain from the Bus Open Data Service (SIRI-SX): diversions, closed stops, roadworks and events, each with the operators and lines affected and the stops named. Filter by operator code (NOC) or by a word matched against the text, e.g.

  • find_train

    Search the GB rail timetable for specific trains. The query combines terms: an operator and a headcode ('LNER 1S09', 'EMR 1H26'), a time and a station ('12:19 from Corby' — matched within about ten minutes either side), two stations ('Corby to St Pancras', which also finds trains

  • plan_door_to_door

    Plan a GB journey that may combine trains, buses and short walks, between railway stations, bus stops or coordinates, from the timetables. Each place can be a station name or CRS code, a bus stop with its town (e.g. 'Briggate Leeds'), a stop code, or 'lat,lon'. Returns the next f

  • direct_destinations

    Every station reachable from a GB railway station WITHOUT CHANGING TRAINS on a date, after a time, each with the train that gets there soonest (a later but faster train beats an earlier slow one), sorted by arrival. Includes places reached by staying aboard a train that divides o

  • find_unit

    Look up a GB passenger train unit or carriage by the five- or six-digit number painted on it (e.g. '360107'): which service it is working now, the other services it is booked to work today, and the last calling point it was reported at. This comes from the operator's rolling-stoc

  • search_stations

    Find GB railway stations by name or code. Returns each station's three-letter CRS code (e.g. KGX), its TIPLOC and whether it has step-free access. The CRS code is what the other station tools accept.

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月7日

  • ! 注意

    作者与仓库一致

    注册中心没有列出源代码仓库,因此无法将发布者(transitradar.co.uk)与代码对应起来

  • … 尚未检查

    仍在维护

    我们还没有从 GitHub 读取这个仓库

  • … 尚未检查

    有许可证

    我们还没有从 GitHub 读取这个仓库

  • ✓ 通过

    端点有响应

    在 36 毫秒内响应(HTTP 200)

  • – 不适用

    使用 OAuth 登录

    无需登录

  • ✓ 通过

    工具描述中没有隐藏指令

    已读取 16 个工具描述,未发现针对 AI 的隐藏指令

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 18354 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 18354 个服务器的 73% 更新
  • 基础检查结果等于或优于此分类中其他 18354 个服务器的 36%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

TransitRadar — UK trains and buses 安全吗?

它在 3 项适用的基础检查中通过了 2 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在作者的云端运行。通过互联网连接,无需安装,但你发送的内容会经过作者的服务器。

它还在维护吗?

GitHub 仓库最后更新于–,最新版本(1.4.0)于16天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。它通过 URL 连接,所以接受远程 MCP 服务器的应用也可以使用,例如开启开发者模式的 ChatGPT。

有什么可以替代它?

同一分类中有:Spec Driven Development, Remote Desktop Commander, Qemu MCP

替代选择

同一分类中其他作者的服务器,按星标数排序。

如何看卡片:★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

Spec Driven Development

作者:formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

在你的电脑上运行★ 440MIT14个月前更新
安装

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

在云端运行★ 211前天更新
安装

Qemu MCP

作者:0xmortuex

Boot and drive QEMU VMs from an AI agent: keys, screenshots, serial. No guest agent.

在你的电脑上运行今天更新
安装

作者的 README

仓库中没有找到 README

问 PopNx