MinerU
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Read local PDFs without uploading. Classifies first, flags untrustworthy text, bounds output.
作者提供的原文
教 AI 做这类工作的 Skill,可与本项一起使用
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Agent skills for Obsidian. Teach your agent to use Obsidian CLI and open formats including Markdown, Bases, JSON Canvas.
列表按使用分(满分 100)排序,由以下部分组成
| 热度 | 0/80 | GitHub 星标或每周下载量:较大的计 60,较小的计 20 |
|---|---|---|
| 新鲜度 | 3/12 | 30 天内有发布或代码更新得满分 |
| 仍在响应 | 0/8 | 上次检查时云端端点有响应 |
| 使用分 | 3/100 |
质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)
选择你使用的 AI 应用,然后复制设置。
用一句话让 AI 帮你安装
请帮我安装 PDF Triage。按照 https://mcp.popnx.com/i/vishalmeena2211-pdf-triage-mcp.md 操作,先把命令给我看,等我同意后再运行。粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文
通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日
第一步:你用哪个 AI?
选择你用的应用,步骤会显示在下方。
可连接 Claude,但需要先准备
需要先在电脑上安装 Node.js(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude 安装 MCP server PDF Triage,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 PDF Triage 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
SettingsDeveloperEdit Config
{
"mcpServers": {
"pdf-triage": {
"command": "npx",
"args": [
"-y",
"pdf-triage-mcp"
]
}
}
}用 PDF Triage 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude 说正在使用 PDF Triage,或回答中出现 PDF Triage 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
PDF_TRIAGE_LOG_LEVEL 写入 stderr 的最低严重级别。默认为 info。 PDF_TRIAGE_MAX_CHARS 工具响应的默认截断上限(以字符计)。用于保护调用方的上下文窗口。默认值为 40000。 PDF_TRIAGE_MAX_FILE_BYTES 服务器可读取的最大 PDF 大小(字节)。解析器会缓冲整个文件而非流式读取。默认值为 104857600(100 MB)。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
ChatGPT 暂时无法连接 PDF Triage
PDF Triage 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器
可连接 Claude Code,但需要先准备
需要先在电脑上安装 Node.js(只需一次)
把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Claude Code 安装 MCP server PDF Triage,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user pdf-triage -- npx -y pdf-triage-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 PDF Triage 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell
claude mcp add --scope user pdf-triage -- npx -y pdf-triage-mcp应能看到 PDF Triage 在列表中并显示已连接
用 PDF Triage 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Claude Code 说正在使用 PDF Triage,或回答中出现 PDF Triage 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
PDF_TRIAGE_LOG_LEVEL 写入 stderr 的最低严重级别。默认为 info。 PDF_TRIAGE_MAX_CHARS 工具响应的默认截断上限(以字符计)。用于保护调用方的上下文窗口。默认值为 40000。 PDF_TRIAGE_MAX_FILE_BYTES 服务器可读取的最大 PDF 大小(字节)。解析器会缓冲整个文件而非流式读取。默认值为 104857600(100 MB)。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同
可连接 Cursor,但需要先准备
需要先在电脑上安装 Node.js(只需一次)
把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 Cursor 安装 MCP server PDF Triage,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 PDF Triage 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
用 PDF Triage 告诉我你能帮我做什么,然后做一件给我看✓ 如果 Cursor 说正在使用 PDF Triage,或回答中出现 PDF Triage 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
PDF_TRIAGE_LOG_LEVEL 写入 stderr 的最低严重级别。默认为 info。 PDF_TRIAGE_MAX_CHARS 工具响应的默认截断上限(以字符计)。用于保护调用方的上下文窗口。默认值为 40000。 PDF_TRIAGE_MAX_FILE_BYTES 服务器可读取的最大 PDF 大小(字节)。解析器会缓冲整个文件而非流式读取。默认值为 104857600(100 MB)。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同
可连接 VS Code,但需要先准备
需要先在电脑上安装 Node.js(只需一次)
把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。
请在这台电脑上为 VS Code 安装 MCP server PDF Triage,按顺序:1) 用 node -v 检查是否有 Node.js。没有的话,请让我从 https://nodejs.org/en/download 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "pdf-triage": { "type": "stdio", "command": "npx", "args": [ "-y", "pdf-triage-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 PDF Triage 的工具真的出现了。这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。
已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter
node -vMac:按 ⌘ + Space,输入 Terminal 后按 Enter
Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”
还没安装: 打开官方下载页,选择 LTS 版本和点选式安装程序:Mac 用 .pkg · Windows 用 .msi。双击后一路下一步即可,不需要 curl 命令
装好后关掉终端再打开,重新运行同一条命令,应显示版本号: node -v
安装一次,所有需要 Node.js 的工具都能用
用 PDF Triage 告诉我你能帮我做什么,然后做一件给我看✓ 如果 VS Code 说正在使用 PDF Triage,或回答中出现 PDF Triage 的工具名称,就表示连接成功
上面的命令不填这些也能用。想调整时再按开发者的说明添加。
PDF_TRIAGE_LOG_LEVEL 写入 stderr 的最低严重级别。默认为 info。 PDF_TRIAGE_MAX_CHARS 工具响应的默认截断上限(以字符计)。用于保护调用方的上下文窗口。默认值为 40000。 PDF_TRIAGE_MAX_FILE_BYTES 服务器可读取的最大 PDF 大小(字节)。解析器会缓冲整个文件而非流式读取。默认值为 104857600(100 MB)。 说明为自动翻译,变量名保持原样;不确定时请查看原文。
菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同
Claude Code
claude mcp add --scope user pdf-triage -- npx -y pdf-triage-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"pdf-triage": {
"command": "npx",
"args": [
"-y",
"pdf-triage-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"pdf-triage": {
"command": "npx",
"args": [
"-y",
"pdf-triage-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"pdf-triage": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"pdf-triage-mcp"
]
}
}
}PDF_TRIAGE_LOG_LEVEL envPDF_TRIAGE_MAX_CHARS envPDF_TRIAGE_MAX_FILE_BYTES env说明为自动翻译,变量名保持原样;不确定时请查看原文。
这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。
依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。
在你的电脑上运行,适用于
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。
我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月20日
注册名称已通过 GitHub 账户 vishalmeena2211 验证,该账户拥有此仓库
代码最后更新于4个月前
使用 MIT
它在你的电脑上运行,没有互联网端点
在你的电脑上运行,改用本地设置
它在你的电脑上运行;我们只能读取互联网端点的工具列表
OSV.dev 中没有 pdf-triage-mcp@0.1.2 的记录
只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日
如果你是作者,可把这段代码贴到 README。徽章会链接回本页。
[](https://mcp.popnx.com/en/servers/vishalmeena2211-pdf-triage-mcp)提问、分享技巧或报告无法使用。按“有帮助”数量排序。
还没有评价
与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。
它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。
注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。
它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。
GitHub 仓库最后更新于4个月前,最新版本(0.1.2)于4个月前进入注册中心。
支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Node.js。
同一分类中有:Puter MCP, XcodeBuildMCP, Vexa, Atlassian Rovo MCP Server, Anki MCP Server
同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。
如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i
Puter MCP enables AI tools to interact with Puter: manage files, websites, workers, and more
XcodeBuildMCP provides tools for Xcode project management, simulator management, and app utilities.
Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.
Connect to Atlassian Jira, Confluence, Loom, and more to search, create, and manage your work.
MCP server for Anki flashcards: adaptive review, notes, media, and deck management via AnkiConnect.
| 本项 PDF Triage | Puter MCP | XcodeBuildMCP | Vexa | Atlassian Rovo MCP Server | Anki MCP Server | |
|---|---|---|---|---|---|---|
| 运行位置 | 需要安装在电脑上 | 在云端运行,无需安装 | 需要安装在电脑上 | 在云端运行,无需安装 | 在云端运行,无需安装 | 需要安装在电脑上 |
| 需要密钥 | 否 | 否 | 否 | 是 | 否 | 否 |
| 可在 Claude 中按 + 添加 | 否 | 否 | 否 | 否 | 是 | 否 |
| 基础检查 | 3/3 | 4/4 | 3/3 | 2/4 | 4/4 | 3/3 |
| 许可证 | MIT | AGPL-3.0 | MIT | Apache-2.0 | Apache-2.0 | MIT |
| 价格 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 | 登记中未列出费用 |
按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。
An MCP server that lets any AI tool read local PDFs — without uploading them, without an OCR bill, and without silently handing back garbage.
Built on @firecrawl/pdf-inspector (Rust, no ML models, no external services).
┌─ pdf_classify ──→ text_based · 0.98 · 12 pages · 0 need OCR ~20ms
├─ pdf_search ──→ "invoice total" found on p4, p9 ~150ms ├─ pdf_extract ──→ clean Markdown, truncated to your budget ~150ms └─ pdf_tables ──→ just the pipe tables, no prose ~150ms
Most PDF tooling has the same failure mode: it returns confident text regardless of whether extraction actually worked. Broken CID fonts, substitution-cipher encodings, scanned pages with no text layer — you get plausible-looking output and find out downstream, if at all.
pdf-inspector is unusually good at *knowing* when it failed. It emits U+FFFD rather than guessing at an unmapped CID, runs substitution-cipher detection over its own output, and reclassifies a document as scanned when extracted text drops below 50% alphanumeric. But it stops at reporting those findings on a result object — and most wrappers throw them away.
This server acts on them. Every response carries the trust signals, above the content, where the model reads them first:
> [!WARNING] ENCODING ISSUES DETECTED. The text layer decoded to suspicious
output — typically a garbled CID font or a substitution-cipher encoding
where letter frequencies match natural language but the letters themselves
are wrong. Treat all extracted text here as unreliable and prefer OCR.
...
Three design rules follow:
pdf_classify costs ~20ms and tells you whether extraction is worth attempting at all.~/.ssh/id_rsa. Enforced in code, not left to the model's judgement.Nothing to install. Every config below runs the published package straight from npm:
npx -y pdf-triage-mcp --root /path/to/your/documents
Your MCP client runs that for you — you only need to paste the config. Confirm it works first:
npx -y pdf-triage-mcp --version
Requires Node 20+. Available on npm as pdf-triage-mcp and in the MCP Registry as io.github.vishalmeena2211/pdf-triage-mcp.
From source instead (for development)
git clone https://github.com/vishalmeena2211/pdf-triage-mcp.git
cd pdf-triage-mcp npm install npm run build node dist/index.js --root ~/Documents
Then substitute "command": "node", "args": ["/absolute/path/to/dist/index.js", ...] for the npx invocation in any config below.
Every config below is complete as written except for one value:
Use an absolute path; ~ is not expanded by most clients. Repeat --root for multiple directories.
PATH gotcha, applies to every GUI client below. Desktop apps launch servers with a minimal environment, so bare
npxoften fails to resolve even though it works in your terminal. If the server won't start, substitute the absolute path — find it withwhich npx(commonly/opt/homebrew/bin/npxon Apple Silicon,/usr/local/bin/npxon Intel macOS).
Why `-y`? It skips npx's install confirmation prompt. Without it, a first run can hang waiting for input that an MCP client cannot provide — the server appears to start and then silently times out.
Config file
| OS | Path |
|---|---|
| macOS | ~/Library/Application Support/Claude/claude_desktop_config.json |
| Windows | %APPDATA%\Claude\claude_desktop_config.json |
| Linux | ~/.config/Claude/claude_desktop_config.json |
{
"mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ] } } }
Verify: Fully quit and relaunch Claude Desktop (not just close the window). A tools icon appears near the chat input — click it and confirm the four pdf_* tools are listed.
Logs: ~/Library/Logs/Claude/mcp*.log (macOS), %APPDATA%\Claude\logs\mcp*.log (Windows).
CLI — the easiest route. The -- separator is mandatory; everything after it is the server command.
# Just you, this project (default)
claude mcp add pdf-triage -- npx -y pdf-triage-mcp --root /Users/me/Documents
claude mcp add --scope user pdf-triage -- npx -y pdf-triage-mcp --root /Users/me/Documents
claude mcp add --scope project pdf-triage -- npx -y pdf-triage-mcp --root /Users/me/Documents
Or edit `.mcp.json` at the project root directly:
{
"mcpServers": { "pdf-triage": { "type": "stdio", "command": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ] } } }
| Scope | Stored in | Shared |
|---|---|---|
local (default) | ~/.claude.json, under this project | No |
user | ~/.claude.json, top level | No |
project | .mcp.json in repo root | Yes, via git |
Verify: claude mcp list → look for ✔ Connected. Project-scoped servers need approval on first use — run /mcp inside a session.
Config file: .cursor/mcp.json (project) or ~/.cursor/mcp.json (global). Project wins on conflict.
{
"mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ] } } }
Verify: Cursor hot-reloads — no restart. Open Cursor Settings → Tools & MCP and look for a green dot next to pdf-triage.
Config file: ~/.codeium/windsurf/mcp_config.json (macOS/Linux), %USERPROFILE%\.codeium\windsurf\mcp_config.json (Windows).
Not created on first launch — create it yourself if missing.
{
"mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ] } } }
Verify: Windsurf watches the file and hot-reloads on save. Tools appear in Cascade on the next chat session.
The key is `servers`, not `mcpServers`. This is the most common mistake when copying a config from Claude Desktop.
Config file: .vscode/mcp.json (workspace), or Command Palette → MCP: Open User Configuration (global).
{
"servers": { "pdf-triage": { "type": "stdio", "command": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ] } } }
CLI alternative:
code --add-mcp '{"name":"pdf-triage","command":"npx","args":["-y","pdf-triage-mcp","--root","/Users/me/Documents"]}'
Verify: MCP tools only work in Agent mode — switch from Ask/Edit to Agent in Copilot Chat, then click Configure Tools and confirm the pdf_* tools appear. Restart VS Code after first adding the file.
The key is `context_servers`, not `mcpServers`, and
commandis a nested object rather than a string.
Config file: ~/.config/zed/settings.json (macOS/Linux), %APPDATA%\Zed\settings.json (Windows). Command Palette → zed: open settings.
{
"context_servers": { "pdf-triage": { "source": "custom", "command": { "path": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ], "env": {} } } } }
If your Zed version rejects that, it predates the nested form — try command, args and env flat at the top level of the server object instead.
Verify: Agent Panel (Cmd+Shift+A) → gear icon → MCP Servers. Green dot means connected.
Config file — separate from VS Code's own:
| OS | Path |
|---|---|
| macOS | ~/Library/Application Support/Code/User/globalStorage/saoudrizwan.claude-dev/settings/cline_mcp_settings.json |
| Windows | %APPDATA%\Code\User\globalStorage\saoudrizwan.claude-dev\settings\cline_mcp_settings.json |
| Linux | ~/.config/Code/User/globalStorage/saoudrizwan.claude-dev/settings/cline_mcp_settings.json |
{
"mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp", "--root", "/Users/me/Documents" ], "disabled": false, "autoApprove": ["pdf_classify", "pdf_search"] } } }
autoApprove runs the listed read-only tools without a confirmation prompt.
Easier route: Cline panel → MCP servers icon → Edit MCP Settings opens this file directly.
Verify: Panel refreshes automatically; green dot next to the server.
Config file: ~/.continue/config.yaml (global) or .continue/config.yaml (project). YAML is current; config.json is deprecated.
mcpServershere is a list, not an object — and YAML needs spaces, never tabs.
mcpServers:
Verify: Reloads automatically on save. Switch Continue to Agent mode — MCP tools are unavailable in other modes.
CLI:
gemini mcp add pdf-triage npx -y pdf-triage-mcp --root /Users/me/Documents
gemini mcp add --scope user pdf-triage npx -y pdf-triage-mcp --root /Users/me/Documents
Or edit `~/.gemini/settings.json` (global) / `.gemini/settings.json` (project):
{
"mcpServers": { "pdf-triage": { "command": "npx", "args": [ "-y", "pdf-triage-mcp"