原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

NUX MG-30

作者:voronkovd版本 0.1.1i★ 1i在你的电脑上运行代码仓库 ↗
注册名称io.github.voronkovd/nux-mg30-mcp

安装方法

What it does

Control a NUX MG-30 guitar processor over USB MIDI: amps, effects, knobs and presets.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 其他

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度4/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度7/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分11/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 NUX MG-30。按照 https://mcp.popnx.com/i/voronkovd-nux-mg30-mcp.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月14日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server NUX MG-30,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "nux-mg30": { "command": "uvx", "args": [ "nux-mg30-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 NUX MG-30 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "nux-mg30": {
          "command": "uvx",
          "args": [
            "nux-mg30-mcp"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 NUX MG-30 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 NUX MG-30,或回答中出现 NUX MG-30 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • MG30_PORT MIDI 端口名称的子字符串(默认:自动检测)
    查看英文原文Substring of the MIDI port name (default: auto-detect)
  • MG30_CHANNEL 设备上设置的 MIDI 通道,范围 1-16(默认 1)。
    查看英文原文MIDI channel set on the device, 1-16 (default 1)
  • MG30_DATA_DIR 备份、补丁文件和日志的存储位置(默认 /.nux-mg30-mcp)。
    查看英文原文Where backups, patch files and logs are stored (default ~/.nux-mg30-mcp)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 NUX MG-30

NUX MG-30 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 NUX MG-30 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 其他 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server NUX MG-30,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user nux-mg30 -- uvx nux-mg30-mcp 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 NUX MG-30 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user nux-mg30 -- uvx nux-mg30-mcp
  4. 在 Claude Code 中输入 /mcp

    应能看到 NUX MG-30 在列表中并显示已连接

  5. 试一试

    用 NUX MG-30 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 NUX MG-30,或回答中出现 NUX MG-30 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • MG30_PORT MIDI 端口名称的子字符串(默认:自动检测)
    查看英文原文Substring of the MIDI port name (default: auto-detect)
  • MG30_CHANNEL 设备上设置的 MIDI 通道,范围 1-16(默认 1)。
    查看英文原文MIDI channel set on the device, 1-16 (default 1)
  • MG30_DATA_DIR 备份、补丁文件和日志的存储位置(默认 /.nux-mg30-mcp)。
    查看英文原文Where backups, patch files and logs are stored (default ~/.nux-mg30-mcp)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server NUX MG-30,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "nux-mg30": { "command": "uvx", "args": [ "nux-mg30-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 NUX MG-30 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 NUX MG-30 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 NUX MG-30,或回答中出现 NUX MG-30 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • MG30_PORT MIDI 端口名称的子字符串(默认:自动检测)
    查看英文原文Substring of the MIDI port name (default: auto-detect)
  • MG30_CHANNEL 设备上设置的 MIDI 通道,范围 1-16(默认 1)。
    查看英文原文MIDI channel set on the device, 1-16 (default 1)
  • MG30_DATA_DIR 备份、补丁文件和日志的存储位置(默认 /.nux-mg30-mcp)。
    查看英文原文Where backups, patch files and logs are stored (default ~/.nux-mg30-mcp)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server NUX MG-30,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "nux-mg30": { "type": "stdio", "command": "uvx", "args": [ "nux-mg30-mcp" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 NUX MG-30 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 NUX MG-30 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 NUX MG-30,或回答中出现 NUX MG-30 的工具名称,就表示连接成功

3 项可选设置(不填也能用)

上面的命令不填这些也能用。想调整时再按开发者的说明添加。

  • MG30_PORT MIDI 端口名称的子字符串(默认:自动检测)
    查看英文原文Substring of the MIDI port name (default: auto-detect)
  • MG30_CHANNEL 设备上设置的 MIDI 通道,范围 1-16(默认 1)。
    查看英文原文MIDI channel set on the device, 1-16 (default 1)
  • MG30_DATA_DIR 备份、补丁文件和日志的存储位置(默认 /.nux-mg30-mcp)。
    查看英文原文Where backups, patch files and logs are stored (default ~/.nux-mg30-mcp)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 NUX MG-30 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user nux-mg30 -- uvx nux-mg30-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "nux-mg30": {
      "command": "uvx",
      "args": [
        "nux-mg30-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "nux-mg30": {
      "command": "uvx",
      "args": [
        "nux-mg30-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "nux-mg30": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "nux-mg30-mcp"
      ]
    }
  }
}

需要你填写的值

  • MG30_PORT env
    MIDI 端口名称的子字符串(默认:自动检测)
    查看英文原文Substring of the MIDI port name (default: auto-detect)
  • MG30_CHANNEL env
    设备上设置的 MIDI 通道,范围 1-16(默认 1)。
    查看英文原文MIDI channel set on the device, 1-16 (default 1)
  • MG30_DATA_DIR env
    备份、补丁文件和日志的存储位置(默认 /.nux-mg30-mcp)。
    查看英文原文Where backups, patch files and logs are stored (default ~/.nux-mg30-mcp)

说明为自动翻译,变量名保持原样;不确定时请查看原文。

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
31/周
连接方式
在你的电脑上运行
最新版本i
0.1.1
分类i
其他
发布到注册中心i
2026年10月1日
代码最后更新i
2026年10月1日
作者
voronkovd
软件包
pypi: nux-mg30-mcp
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 voronkovd 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于2个月前

  • ✓ 通过

    有许可证

    使用 MIT

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 nux-mg30-mcp@0.1.1 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月16日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/voronkovd-nux-mg30-mcp.svg)](https://mcp.popnx.com/en/servers/voronkovd-nux-mg30-mcp)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“其他”中的其他服务器比较i

  • 星标数多于此分类中其他 20613 个服务器的 86%
  • 发布到注册中心的时间比此分类中其他 20613 个服务器的 47% 更新
  • 基础检查结果等于或优于此分类中其他 20613 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

NUX MG-30 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于2个月前,最新版本(0.1.1)于2个月前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

作者:koala73广泛使用★ 9.1万3天前更新

在云端运行✓ 服务方 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

作者:openstatusHQ广泛使用★ 92742个月前更新

在云端运行✓ 服务方 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

作者:Klavis-AI正在增长★ 582514个月前更新

在云端运行仓库已归档✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

作者:jitsucom广泛使用★ 51364个月前更新

在云端运行✓ 服务方 · jitsu.com
与相似项目对比
本项
NUX MG-30
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
运行位置需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否否否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/44/44/41/44/4
许可证MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

nux-mg30-mcp

An MCP server that lets an AI assistant (Claude Desktop or any other MCP client) control a NUX MG-30 guitar processor over USB MIDI.

Describe the sound you want in plain words ("tight Children of Bodom rhythm tone", "less fizz, more mids on the lead"), and the assistant picks models, turns knobs, saves and names presets on the unit.

Unofficial project. It is not affiliated with or endorsed by NUX / Cherub Technology. The preset protocol was reverse-engineered on firmware 5.0.2, and other firmware versions may differ. Writing presets overwrites slots on your device, so run `backup_presets` first.

What it can do

  • Live editing: select a model in any block (35 amps, 24 cabs/IRs, 15 drives, 14 modulations, 8 delays, 6 reverbs, …), switch blocks on and off, set knobs by name (gain, middle, 1.2k, subd, …).
  • Read presets: list all 128 presets with names and amps, decode any preset (name, signal chain, models, knob values), and read the edit buffer including unsaved edits.
  • Write presets: save the edit buffer to any slot with a name, rename presets, and back up or restore presets to and from JSON files. Every write is verified by reading it back.
  • Tone recipes: apply a whole tone from a JSON patch file. Examples are in examples/patches.

Requirements

  • A NUX MG-30 connected over USB. The device shows up as a class-compliant MIDI port.
  • Python 3.10+.
  • An MCP client, for example Claude Desktop.

The server has to run on the computer the MG-30 is plugged into, because it needs direct access to the USB MIDI port. Development and testing were done on macOS; Linux and Windows should work through python-rtmidi, but they are untested.

Installation

The easiest way is uv: uvx downloads and runs the server, no manual setup needed.

Claude Desktop

Open Settings → Developer → Edit Config and add:

{

"mcpServers": { "nux-mg30": { "command": "uvx", "args": ["nux-mg30-mcp"] } } }

Restart Claude Desktop completely. The tools show up under the nux-mg30 server. If Claude cannot find uvx, use its absolute path (which uvx, typically ~/.local/bin/uvx).

Alternatively, install it with pipx install nux-mg30-mcp or pip install nux-mg30-mcp and use "command": "nux-mg30-mcp".

From source
git clone https://github.com/voronkovd/nux-mg30-mcp.git

cd nux-mg30-mcp python3 -m venv .venv .venv/bin/pip install -e .

Then use "command": "/absolute/path/to/nux-mg30-mcp/.venv/bin/nux-mg30-mcp" in the client config.

Optional check without any AI client: lower your volume, then run python scripts/midi_check.py. The script mutes the AMP block for 1.5 seconds and restores it.

Configuration
VariableDefaultMeaning
MG30_PORTauto (MG-30 / NUX)substring of the MIDI port name
MG30_CHANNEL1MIDI channel set on the device
MG30_DATA_DIR~/.nux-mg30-mcpwhere backups, patch files and logs are stored
MG30_DEVICE_MAPbundledpath to a custom device_map.json
MG30_DEBUG_TOOLSoff1 exposes low-level research tools

Put these under "env" in the MCP client config.

First steps

  1. Ask the assistant to back up all presets (backup_presets).
  2. Ask it to list presets to see what is where.
  3. Pick a free or unimportant slot and describe a sound. For example: *"Switch to 12C and build a Death 'Sound of Perseverance' rhythm tone, then save it as 'Chuck Rhythm'."*

Tools

ToolWhat it does
connect, list_midi_portsfind and open the MG-30
device_statecurrent preset, models, on/off and knobs of the edit buffer
set_model(block, model, on)select a model by name or number
set_block(block, on)switch a block on or off
set_knob(block, knob, value)set a knob by label or index, 0..100
apply_patch(patch)apply models, on/off and knobs for several blocks at once
select_preset(preset)switch preset ('07A' or 0..127)
list_presets, preset_info(preset)read and decode stored presets or the edit buffer
save_preset(preset, name)save the edit buffer to a slot, verified by read-back
rename_preset(preset, name)rename a stored preset
backup_presets, list_backups, restore_presetfull backup and single-preset restore
save_patch_file, list_patch_files, load_patch_filetone recipes as JSON files

Blocks are wah, comp, efx, amp, eq, ng (gate), mod, dly, rvb, ir (cab) and sendreturn. Common aliases such as delay, reverb, cab and gate also work. Model and knob names are listed in device_map.json.

Patch format

{

"blocks": { "efx": {"model": "T Scream", "knobs": {"drive": 15, "tone": 55, "level": 85}}, "amp": {"model": "Vivo", "knobs": {"gain": 68, "middle": 68, "treble": 58}}, "ir": {"model": "V412"}, "dly": {"model": "Digital Delay", "knobs": {"e.level": 30, "feedback": 32, "subd": 5}}, "mod": {"on": false} } }

Selecting a model resets that block's knobs to the model defaults, so set knobs after the model (apply_patch does this in the right order). The files in examples/patches are starting points recreated by ear from recordings. They are not official artist presets.

Limitations

  • The device does not report knob changes you make with its own controls. The server re-reads the edit buffer when it needs the current state.
  • The signal-chain order cannot be changed through MIDI yet. To get a different chain, start from a preset that already has it (for example, the factory acoustic presets put the IR before the amp).
  • Parts of the preset format are still unknown: parts 1–2 of each preset, and the data after the name (probably footswitch and expression assignments). These are preserved untouched when writing.
  • Unverified: wah pedal position (CC11), send/return knobs, patch volume, CC79.
  • The MG-30 drops MIDI messages sent faster than about 40 ms apart, so the server throttles itself.

How it works

Everything is documented in docs/PROTOCOL.md: the CC map, the SysEx read/write/commit commands, and the 7-bit slot layout of the preset data. Findings for other firmware versions or other NUX units are very welcome.

Development

.venv/bin/pip install -e ".[dev]"

.venv/bin/pytest

The tests run against a fake device and a real preset dump, so no hardware is needed. With MG30_DEBUG_TOOLS=1 the server also exposes debug_monitor (record incoming MIDI), debug_sysex_query, debug_send_cc, debug_send_sysex and debug_probe_cc (find which bits of the preset a CC changes). These tools were used to reverse-engineer the format.

License

MIT, see LICENSE.

NUX, MG-30 and QuickTone are trademarks of their respective owners. Model names used by the device, such as amp and pedal names, refer to the products they emulate and are used here only to identify the models.