EmailOctopus MCP by usefulapi
概要
作者による説明(英語の原文)
Manage lists, contacts and campaigns, and read campaign performance reports on EmailOctopus.
PopNx MCPの3つの柱
この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。
- 利用者の声iレビューはまだありませんレビューは今後のステップで、アカウント機能と一緒に始まります
- 私たちの基本チェックi3項目中3項目に合格公開情報からチェック。コードはまだスキャンしていません
- 利用状況i初期★ –
できること
このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。
- 接続方法: クラウドで動く
- トランスポート: Streamable HTTP
- カテゴリ: マーケティング・SNS
インストール
使っているAIアプリを選んで、設定をコピーしてください。
インストールの前に
- 基本チェック:3項目中3項目に合格
- 作者のサーバーで動きます。あなたが頼んだ内容は、作者のサーバーを通ります。
- できること:13件(ツール) emailoctopus_list_lists, emailoctopus_get_list, emailoctopus_list_contacts, emailoctopus_get_contact …
- レジストリには、入力が必要なキーは載っていません。
必要なもの
- クラウドで動くインストール不要。インターネット経由でつながります
どのアプリを使っていますか?
上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。
ウェブ、デスクトップ、モバイルのClaudeで使えます:
- Settings → Connectors を開く
- Add custom connector を押す
- 下のアドレスを貼り付けて Add を押す
- サインインを求められたら、作者のサービスにサインインする
https://emailoctopus.usefulapi.io/mcpターミナルでこれを実行します
claude mcp add --transport http emailoctopus https://emailoctopus.usefulapi.io/mcpまたは、設定を自分でコピーする
プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます
{
"mcpServers": {
"emailoctopus": {
"url": "https://emailoctopus.usefulapi.io/mcp"
}
}
}ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。
または、設定を自分でコピーする
プロジェクトの .vscode/mcp.json に貼り付けます
{
"servers": {
"emailoctopus": {
"type": "http",
"url": "https://emailoctopus.usefulapi.io/mcp"
}
}
}ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。
ChatGPTがつなげるのは、インターネット上のサーバーだけです:
- ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
- Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
- 下のアドレスを貼り付け、名前を付けて保存する
- サインインを求められたら、作者のサービスにサインインする
https://emailoctopus.usefulapi.io/mcpメニューの名前は、プランや時期によって少し違うことがあります。
選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。
この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
できること
ツールの名前と説明は、サーバーが2026年11月9日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。
emailoctopus_list_listsList all lists in the account. Returns {data:[...],paging:{...}} — each list's id, name, contact counts by status, and created_at. Paginate with `limit` (max 100) and `starting_after` (cursor from the previous page). EmailOctopus: GET /lists.
emailoctopus_get_listGet a single list by its id. Returns the list's full state — name, contact counts by status, and created_at. EmailOctopus: GET /lists/{list_id}.
emailoctopus_list_contactsList the contacts in a list. Returns {data:[...],paging:{...}} — each contact's id, email_address, fields, tags, status, and created_at. Paginate with `limit` (max 100) and `starting_after`. EmailOctopus: GET /lists/{list_id}/contacts.
emailoctopus_get_contactGet a single contact in a list. Returns email_address, fields, tags, status, and created_at. `contact_id` is the MD5 hash of the lowercased email address, or the `id` returned by emailoctopus_list_contacts. EmailOctopus: GET /lists/{list_id}/contacts/{contact_id}.
emailoctopus_list_campaignsList all campaigns in the account. Returns {data:[...],paging:{...}} — each campaign's id, name, status, subject, and created_at. Paginate with `limit` (max 100) and `starting_after`. EmailOctopus: GET /campaigns.
emailoctopus_get_campaignGet a single campaign by its id. Returns the campaign's full state — name, status, subject, from, content, and created_at. EmailOctopus: GET /campaigns/{campaign_id}.
emailoctopus_get_campaign_reportGet a campaign's aggregate performance report — sent, opened, clicked, bounced, unsubscribed, complained, and related counts. EmailOctopus: GET /campaigns/{campaign_id}/reports/summary.
emailoctopus_get_campaign_links_reportGet a campaign's per-link click report — for each link in the campaign, the URL and its click counts. EmailOctopus: GET /campaigns/{campaign_id}/reports/links.
emailoctopus_create_listCREATES a new list — this MODIFIES live data. Provide a `name`. EmailOctopus: POST /lists. Returns the created list.
emailoctopus_update_listUPDATES an existing list by id — this MODIFIES live data. Sets the list's `name`. EmailOctopus: PUT /lists/{list_id}. Returns the updated list.
emailoctopus_create_contactCREATES a new contact in a list — this MODIFIES live data (adds a subscriber). `email_address` is required; optionally set `fields` (keyed by field tag), `tags`, and `status`. EmailOctopus: POST /lists/{list_id}/contacts. Returns the created contact.
emailoctopus_update_contactUPDATES an existing contact in a list — this MODIFIES live data. Send only the fields you want to change (email_address, fields, tags, status). `contact_id` is the MD5 hash of the lowercased email address, or the id from list_contacts. EmailOctopus: PUT /lists/{list_id}/contacts/
emailoctopus_delete_contactPERMANENTLY REMOVES a contact from a list — this MODIFIES live data and cannot be undone. `contact_id` is the MD5 hash of the lowercased email address, or the id from list_contacts. EmailOctopus: DELETE /lists/{list_id}/contacts/{contact_id}.
基本チェックi
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月9日にチェック
- ✓ 合格
作者とリポジトリが一致
レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)
- … 未チェック
今もメンテナンスされている
このリポジトリはまだGitHubから読み取っていません
- … 未チェック
ライセンスがある
このリポジトリはまだGitHubから読み取っていません
- ✓ 合格
エンドポイントが応答する
645ミリ秒で応答(HTTP 200)
- – 対象外
OAuthでサインイン
サインイン不要
- ✓ 合格
ツールの説明に隠れた指示がない
13件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした
マーケティング・SNSのほかのサーバーとの比較i
- このカテゴリのほかの3636件のうち0%よりスターが多い
- このカテゴリのほかの3636件のうち94%より最近レジストリに公開
- 基本チェックの結果が、このカテゴリのほかの3636件のうち100%と同じかそれ以上
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
よくある質問
EmailOctopus MCP by usefulapiは安全ですか?
当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
どんなキーやコードが必要ですか?
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
パソコンで動きますか、それともクラウドですか?
作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。
今もメンテナンスされていますか?
GitHubリポジトリの最終更新は–、最新バージョン(1.36.5)がレジストリに届いたのは昨日です。
どのアプリで使えますか?
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。
代わりに使えるものは?
同じカテゴリには:MCP YouTube Transcript, Google Analytics MCP, BibiGPT YouTube Video Summarizer
代わりの候補
同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。
カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
Google Analytics MCP
GA4 MCP server for AI agents: schema discovery, server-side aggregation, analysis-ready defaults.
BibiGPT YouTube Video Summarizer
AI video summarizer: summarize and transcribe YouTube, Bilibili, TikTok and podcast videos.
作者のREADME
READMEを開く
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
EmailOctopus MCP by usefulapi
Manage EmailOctopus from Claude, Cursor, or any MCP client — manage lists, contacts and campaigns, and read campaign performance reports. Hosted, no local install: connect with your EmailOctopus API token.
Live endpoint: https://emailoctopus.usefulapi.io/mcp · Homepage: https://usefulapi.io
Connect
- Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste
https://emailoctopus.usefulapi.io/mcp. - Claude Code:
claude mcp add --transport http emailoctopus https://emailoctopus.usefulapi.io/mcp, then run/mcpto log in. - VS Code: Add to VS Code.
- Cursor and other clients: add the URL as a remote MCP server:
{
"mcpServers": { "emailoctopus": { "url": "https://emailoctopus.usefulapi.io/mcp" } } }
Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your EmailOctopus credentials.
Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/emailoctopus/
On first connect you'll paste your EmailOctopus API token (EmailOctopus → Account → Integrations & API). It's validated, stored per-user, and scoped to you — no keys in config files.
Tools
| Tool | Type | What it does |
|---|---|---|
emailoctopus_list_lists | read | List lists |
emailoctopus_get_list | read | Get list |
emailoctopus_list_contacts | read | List contacts |
emailoctopus_get_contact | read | Get contact |
emailoctopus_list_campaigns | read | List campaigns |
emailoctopus_get_campaign | read | Get campaign |
emailoctopus_get_campaign_report | read | Get campaign report |
emailoctopus_get_campaign_links_report | read | Get campaign links report |
emailoctopus_create_list | write | Create list |
emailoctopus_update_list | write | Update list |
emailoctopus_create_contact | write | Create contact |
emailoctopus_update_contact | write | Update contact |
emailoctopus_delete_contact | write | Delete contact |
emailoctopus_usage_status | meta | Usage status (free-tier meter) |
emailoctopus_request_feature | meta | Request a missing feature |
emailoctopus_upgrade | meta | Upgrade to Pro or Pro+ |
emailoctopus_cancel_subscription | meta | Cancel the Pro subscription |
read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.
Pricing
| Plan | Price | Limit |
|---|---|---|
| Free | $0 | 50 tool calls / month |
| Pro (per user) | $9/mo or $90/yr (2 months free) | Unlimited* |
\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.
Pro covers this server only. Subscribe with emailoctopus_upgrade (it returns a Stripe Checkout link). Cancel any time with emailoctopus_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running emailoctopus_upgrade before then undoes the cancel. Or write to support@usefulapi.io.
License
MIT — see LICENSE. Documentation only; the server is hosted.