BuzzMeBro

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

• 연결 방식: 클라우드에서 실행
• 전송 방식: Streamable HTTP
• 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

필요한 것

• 클라우드에서 실행설치할 것 없음. 인터넷으로 연결돼요

어떤 앱을 쓰세요?

https://buzzmebro.com/api/mcp

claude mcp add --transport http buzzmebro https://buzzmebro.com/api/mcp

{
  "mcpServers": {
    "buzzmebro": {
      "url": "https://buzzmebro.com/api/mcp"
    }
  }
}

{
  "servers": {
    "buzzmebro": {
      "type": "http",
      "url": "https://buzzmebro.com/api/mcp"
    }
  }
}

https://buzzmebro.com/api/mcp

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 8일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

• check_building

  Checks whether BuzzMeBro can give this building a local buzzer number, and returns the price, the free-trial terms and how the service works. Call this first. Stores nothing and costs nothing.

• create_setup

  Creates a BuzzMeBro setup for the person and returns setup_id and a status_token you must keep for every later call (plus setup_url, a fallback link if you cannot relay a texted code). Only call it after check_building said available and the person has asked you to set it up. No

• send_phone_code

  Texts a 6-digit code to the mobile number given in create_setup (never to any other number). Tell the person a text is coming and ask them to read the code to you, then call confirm_phone_code. Call again only if it has not arrived after a minute; each setup gets 3 codes.

• confirm_phone_code

  Checks the code the person read back to you. This proves the phone is theirs, which matters because that phone will open their front door. Five tries per setup. Next: start_checkout.

• start_checkout

  After confirm_phone_code: creates the person’s BuzzMeBro account and apartment and returns payment_url, Stripe’s own secure page where the person approves a card, Apple Pay, Google Pay or Link (with the free month when it applies, nothing is charged until it ends). Give them the

• get_setup_status

  Reads how far the setup has got and says what to do next. Once the person has paid, this call gets their number; when status is "ready" it returns their new BuzzMeBro number and swap_the_buzzer: the steps to get the building to point the buzzer at that number, and ready-to-send m

• partner_program_info

  Returns how the partner program works: the 50% share of collected revenue, what counts and what does not, when and how payouts happen, the rules, and the steps to join. Call it first and explain it to the person before applying. Stores nothing.

• partner_apply

  Starts a partner application with the person’s details and returns application_id and application_token. Only call it when the person has asked to join. No text is sent by this call. Next: partner_send_code.

• partner_send_code

  Texts a 6-digit code to the mobile number in the application (never any other number). Ask the person to read it to you, then call partner_confirm_code. Each application gets 3 codes, at least a minute apart.

• partner_confirm_code

  Checks the texted code. Five tries per application. Next: partner_terms_link.

• partner_terms_link

  Returns a one-time link to the partner terms. Give it to the person: they read the terms and press Accept themselves. You cannot accept for them. When they say it is done, call partner_claim_key.

• partner_claim_key

  After the person accepted the terms: returns their partner link, code and partner key. The key is shown once; keep it private and use it for the partner_get_* tools. The application token stops working after this call.

• partner_get_links

  Returns the partner’s share link, typed code, a QR code (SVG) and their dashboard address.

• partner_get_kit

  Returns ready texts, a resident email, a move-in text and email to forward to new tenants, desk card and move-in insert wording with the partner’s link, links to the partner’s printable move-in package (move-in insert and QR card PDFs with their own QR and code), plus the house r

• partner_get_stats

  Returns status, visits, signups, free months, paying apartments, collected revenue, earnings by state (on hold, ready, paid, reversed), the share ledger (apartments as codes only, never names or addresses) and payout history. Quote only these numbers.

• partner_payout_link

  Returns a one-time link to a BuzzMeBro page that sends the person to Stripe’s own secure page, where THEY confirm their identity and add their bank. You never see or type bank details. Payouts start once they have at least $25 ready. First-time setup only: once payouts work, payo

• partner_list_sublinks

  Lists the extra tracked links (one per location, building or staff member) with each one’s visits, apartments and earnings. Every apartment and every dollar rolls up to the partner.

• partner_create_sublink

  Adds a tracked link with its own code for one location, building or staff member (up to 50). Renters who use it count for this partner, with the same two-months-free perk.

• partner_disable_sublink

  Switches off one tracked link: its code stops bringing new apartments. Apartments it already brought stay with the partner.

• partner_rotate_key

  Revokes the current partner key and returns a new one (shown once). Use it if the key may have leaked. The partner gets a text whenever the key is replaced.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 8일 점검

• ! 주의

  제작자와 저장소 일치

  레지스트리에 소스 저장소가 없어서, 게시자(buzzmebro.com)와 코드를 맞춰 볼 수 없어요

• … 아직 점검 안 함

  계속 관리되고 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• … 아직 점검 안 함

  라이선스 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• ✓ 통과

  엔드포인트 응답

  135ms 만에 응답(HTTP 200)

• – 해당 없음

  OAuth로 로그인

  로그인 필요 없음

• ✓ 통과

  도구 설명에 숨겨진 지시 없음

  도구 설명 20개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

• 이 카테고리의 다른 서버 18437개 중 0%보다 스타가 많아요
• 이 카테고리의 다른 서버 18437개 중 65%보다 최근에 레지스트리에 공개됐어요
• 기본 점검 결과가 이 카테고리의 다른 서버 18437개 중 36%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

제작자의 README

저장소에서 README를 찾지 못했어요