NestingCalc Calculators

Installation

Wähle die KI-App, die du nutzt, und kopiere die Einstellungen.

2/3 Prüfungen bestanden · Was du fragst, läuft über den Server des Anbieters (mcp.nestingcalc.com) · ✓ Befehle geprüft am 13. Nov. 2026

claude mcp add --transport http --scope user calculators https://mcp.nestingcalc.com/mcp

{
  "mcpServers": {
    "calculators": {
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}

{
  "servers": {
    "calculators": {
      "type": "http",
      "url": "https://mcp.nestingcalc.com/mcp"
    }
  }
}

Welche Apps ihn nutzen können

Basierend darauf, wie sich dieser Server verbindet, und auf der eigenen Doku jeder App, geprüft am 10. Nov. 2026.

Verbinden sich über das Internet in

ClaudeChatGPTGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatOpen WebUIRaycast

Alle Apps, mit Vor- und Nachteilen →

Was er kann

Tool-Namen und -Beschreibungen genau so, wie der Server sie am 9. Nov. 2026 gemeldet hat. Geschrieben hat sie der Entwickler, nicht wir; wir zeigen sie als reinen Text.

• linear_cutting_optimizer

  Optimize 1D cutting plans for bars, pipes and profiles (linear cutting stock problem, best-fit decreasing heuristic). Returns bars used, per-bar cut lists with positions, total waste and unplaced parts. A web_url with the plan prefilled is included for a visual SVG diagram.

• sheet_cutting_optimizer

  Optimize 2D guillotine cutting plans for plywood, MDF, glass, sheet metal (2D nesting with kerf, per-part rotation lock for grain direction, optional sheet trim and multiple stock sizes). Returns sheets used, piece positions, utilization, estimated cut length/count and unplaced p

• board_feet_calculator

  Calculate board feet and lumber cost (thickness x width x length / 144 in inches). Accepts multiple boards and an optional price quoted per board foot or per MBF (thousand board feet).

• miter_angle_calculator

  Miter angles three ways: corner mode (any corner angle between two pieces), sides mode (regular polygon with N sides), crown mode (miter + bevel for crown molding at a spring angle).

• lumber_weight_calculator

  Weight of lumber by species, dimensions, quantity and moisture (dry/fresh), using species density tables. Optional custom density in kg/m3.

• rebar_takeoff

  Rebar weight takeoff (d2/162 rule): total length, weight in kg and bars per tonne for a list of rebar lines. Supports metric mm bars and US # sizes as diameters.

• metal_weight_calculator

  Weight of metal stock per profile: pipe/tube (OD + wall), round bar, square/rectangular tube, flat bar, angle, beam/I-beam. Materials: steel, stainless, aluminum, copper, brass.

• cnc_feeds_speeds

  CNC spindle RPM and feed rate from tool diameter, flute count, chip load and cutting speed. Works for routers and mills, metric and imperial.

• sheet_metal_gauge

  Convert sheet metal gauge to thickness (mm) or thickness to gauge, and compute sheet weight for steel, stainless, aluminum or galvanized steel.

• tile_calculator

  Tiles, boxes and cost for a room: room and tile dimensions, grout width, waste factor by layout pattern (straight, offset, diagonal, herringbone...), optional box size and prices.

• wallpaper_calculator

  Wallpaper rolls needed for a wall, accounting for pattern repeat and openings. Use a standard roll preset (eu, us-single, us-double, commercial54) or custom roll dimensions.

• baluster_spacing_calculator

  Equal baluster/spindle spacing for a run: number of balusters, exact gap and positions. Enforces a maximum gap (e.g. the 4-inch / 100 mm sphere code rule).

• flooring_calculator

  Laminate/vinyl plank takeoff: planks, boxes and cost with offcut reuse between rows (best-fit), expansion gap, layout waste presets and direction.

• embroidery_resize

  Resize an embroidery design file (PES or DST) by a scale percentage. Returns stitch stats before/after, a density safety verdict (safe within +/-15%) and the resized file as base64.

• hoppus_volume

  Hoppus (quarter-girth) volume of round logs from mid-length circumference and length: (C/4)^2 x L. Returns Hoppus volume, true volume (x 4/pi), Hoppus tons (50 h ft3) and a board-feet approximation, with optional quantity and value per Hoppus unit.

• log_volume

  Cubic volume of a log by classical formula: Huber (mid diameter only), Smalian (both end diameters) or Newton (all three, most accurate). Metric (cm, m) or imperial (in, ft); returns volume in m3 and ft3.

• jas_log_scale

  Japanese Agricultural Standard (JAS) log scale: official diameter rounding (floor to 1 cm below 14 cm, even 2 cm at 14 cm and above), oval-log averaging, optional +2 cm ovality adjustment and the length allowance for logs over 6 m. Volume per log and totals in m3.

• timber_unit_converter

  Convert timber quantities between m3, ft3, board feet, MBF, Hoppus ft3, Hoppus m3 and Hoppus tons, and translate a price quoted in any unit into $/m3 and $/MBF (1 MBF = 2.3597 m3).

• green_log_weight

  Weight of a roundwood/log batch at any moisture content: W = volume x basic density x (1 + MC/100), per USDA Wood Handbook 2021 Ch.4. Presets for 14 verified species (acacia, rubberwood, eucalyptus, oak, teak, spruce...) or a custom basic density. Returns oven-dry mass, water mas

• stowage_factor

  Stowage factor SF = cargo volume (m3) / cargo mass (tonnes), with classification against the IMO CSS Code Table 4.1 reference ranges for wood cargoes (sawn timber, tropical logs, plywood...).

• container_loading

  How many uniform cartons fit in a shipping container before cube-out or weigh-out. Presets: 20GP (33.2 CBM nominal, 28,200 kg payload), 40GP (67.7 CBM, 26,700 kg), 40HC (76.4 CBM, 68 usable, 26,500 kg) — all editable. Returns max pieces by volume vs weight, the binding limit, bal

• sawmill_recovery

  Sawmill recovery rate (lumber recovery factor): sawn volume out / roundwood volume in, benchmarked against FAO/EU/SE-Asia reference ranges. Also computes log-rule overrun/underrun: (actual BF - rule BF) / rule BF — Doyle underestimates small logs, so overrun is usually positive.

• moisture_content

  Wood moisture content (WH-2021 Ch.4 Eq. 4-1..4-4). Two modes: (1) sample-based MC_od/MC_wb from wet+dry masses; (2) drying outcome — mass + water lost when going from start MC to target MC. Optional Gb (kg/m³) returns MCmax and MCsink. Basis 'od' (oven-dry, industry default) or '

• wood_shrinkage

  Wood shrinkage from a start MC to an end MC (WH-2021 Eq. 4-9: S_x = S_od × (1 − x/FSP)). Direction: tangential (board width) or radial (board thickness) or volumetric. Picks a species from the wood-species table (16 verified species) or accepts custom S_od + FSP. MC is clamped to

• wood_emc

  Equilibrium moisture content (EMC) from temperature and RH using the Hailwood–Horrobin sorption model (Simpson 1973 coefficients, desorption branch — WH-2021 Ch.4 Table 4-2). Optional reverse mode: target MC → required RH at the given temperature.

• kiln_capacity

  Kiln charge capacity: wood volume per batch (AH-188 / TechDrying). V_wood = D×R×C × t/(t+s) × f where t=board thickness, s=sticker thickness, f=fill factor (0.85–0.95). Returns wood volume in m³ and board feet (1 m³ = 423.77 BF).

• rough_sizing

  Rough sizing — convert between finished (planed, kiln-dried) and rough-sawn dimensions before drying and planing. Adds planing allowance (default 2.5 mm/face) + saw kerf (default 2.2 mm band) and applies WH-2021 Eq. 4-9 shrinkage. Direction: tangential (board width) or radial (bo

• firewood_calculator

  Convert firewood volume between cord (128 ft3), stere/Raummeter (stacked m3), solid m3 (Festmeter), loose m3 and ft3, with optional weight estimate by wood species (dry/fresh).

• rpm_calculator

  Spindle speed (RPM) from cutting speed: n = Vc*1000/(pi*D) metric, n = Vc*12/(pi*D) imperial. Metric takes diameter in mm and Vc in m/min; imperial takes diameter in inches and Vc in SFM. Includes a web_url with the calculation prefilled.

• cutting_speed_calculator

  Cutting speed from spindle speed: Vc = pi*D*n/1000 metric (m/min), SFM = pi*D*n/12 imperial. Always also returns the same speed converted to the other unit system. Includes a web_url with the calculation prefilled.

• timber_beam_capacity

  Allowable load on a simply supported rectangular timber beam (planning estimate, Eurocode 5 conventions, EN 338 grades C16-D40/D24-D40). Returns allowable UDL and center point load (gross and net of self-weight), governing mode (bending vs deflection at L/300), utilization, secti

• glass_price_calculator

  Cut-to-size glass cost and weight estimate: net area with optional waste allowance, weight (2.5 kg/m2 per mm of thickness), material cost from your price per m2, optional polished-edge work per running metre, total and per-piece cost. Includes a web_url with the quote prefilled.

• manufacturing_yield

  Cumulative yield through a wood production chain (sawing -> drying -> machining -> finishing). Multiplies stage yields, shows per-stage loss and computes the roundwood volume needed for a target finished volume.

• glue_consumption

  Wood adhesive quantity: bond area x spread (g/m2, TDS presets like PVAc D3 175, EGP 250, finger-joint PUR 530) x application faces x waste allowance. Also computes bond area for edge-glued panels (joints from board width) and face lamination lay-ups.

• paint_coverage

  Wood finishing paint quantity. Technical route: theoretical coverage = 10 x %volume solids / DFT(um), multiplied by transfer efficiency (conventional spray 30-35%, airless ~50%, HVLP ~65-90%, brush/roller ~90%); or a data-sheet coverage in m2/L. Adds an optional extra % for carve

• cbm_shipment

  Packing CBM for cartons: per-line and lot volume (m3), total weight and lot density, with a cube-out / weigh-out verdict against the 40HC balanced density (390 kg/m3 - same presets as container loading).

• bom_costing

  Bill-of-materials cost roll-up for furniture: buy quantity = net qty x (1 + waste%, verified presets: S4S lumber 18%, rough 28%, nested panels 10%, hardware 3%), line and total costs, cost per product and a selling price from a target margin (price = cost / (1 - margin)).

Basischecksi

Wir prüfen Informationen, die jeder sehen kann; den Code haben wir nicht gelesen. Checks, die nicht zutreffen, werden nicht mitgezählt. · Geprüft am 13. Nov. 2026

• ! Vorsicht

  Entwickler passt zum Repo

  Die Registry nennt kein Quell-Repo, deshalb können wir den Herausgeber (nestingcalc.com) nicht dem Code zuordnen

• … Noch nicht geprüft

  Wird noch gepflegt

  Dieses Repo haben wir noch nicht von GitHub gelesen

• … Noch nicht geprüft

  Hat eine Lizenz

  Dieses Repo haben wir noch nicht von GitHub gelesen

• ✓ Bestanden

  Endpunkt antwortet

  Antwort in 253 ms (HTTP 200)

• – Nicht zutreffend

  Anmeldung mit OAuth

  Keine Anmeldung nötig

• ✓ Bestanden

  Keine versteckten Anweisungen in Tool-Beschreibungen

  Wir haben 37 Tool-Beschreibungen gelesen und keine versteckten Anweisungen an die KI gefunden

Nutzerbewertungen

Noch keine Bewertungen

Mit Google anmelden, um zu bewerten

Im Vergleich mit anderen in Sonstigesi

• Mehr Sterne als 0 % der anderen 19664 Server in dieser Kategorie
• Neuer in der Registry veröffentlicht als 47 % der anderen 19664 Server in dieser Kategorie
• Basischecks gleich gut wie oder besser als bei 44 % der anderen 19664 Server in dieser Kategorie

Verglichen mit allen aktiven Servern dieser Kategorie in der Registry. Sterne zählen nur, wenn dem Herausgeber das Repo gehört.

Andere in derselben Kategorie

Server derselben Kategorie von anderen Entwicklern, sortiert nach Sternen.

So liest du eine Karte:↓ Downloads pro Wochei★ GitHub-SterneiDrei Säulen: Bewertungen · Checks · NutzungiAktualisiert = neueste Version in der Registry veröffentlichti

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 102 tools.

von koala73·Weit verbreitet·★ 90.571·Aktualisiert heute

Läuft in der Cloud✓ vom Dienst · worldmonitor.app

Verbinden

Claude Flow

AI orchestration with hive-mind swarms, neural networks, and 87 MCP tools for enterprise dev.

von ruvnet·Weit verbreitet·↓ 13.513/Wo.·★ 81.591·Aktualisiert vor 14 Monaten

Läuft auf deinem Computer

Installieren

Windmill

Run Windmill scripts and flows and manage jobs, schedules, resources and variables.

von windmill-labs·Weit verbreitet·★ 18.550·Aktualisiert gestern

Läuft in der Cloud

Verbinden

README vom Entwickler

Keine README im Repo gefunden