Prototyp · Vorschau: alle Server aus der offiziellen Registry, alle 30 Minuten synchronisiert. Bewertungen und Benutzerkonten folgen in einem späteren Schritt.
PopNx MCPMCP-Server für alle, die KI nutzen · in einfachen Worten erklärt

The Cable Code

von exquadVersion 1.47.0i★ –iLäuft in der Cloud
Name in der Registryio.github.exquad/thecablecode

Installieren

Überblick

Beschreibung vom Entwickler (englisches Original)

Decode cables in 69 coding systems; design, rate, check, find equivalents; drums, laying, fire.

Die drei Säulen von PopNx MCP

Diese drei werden nie zu einer Punktzahl zusammengefasst: Meinungen, Messungen und Beliebtheit sind verschiedene Dinge.

Was du damit machen kannst

Für diesen Server haben wir noch keine Zusammenfassung in einfacher Sprache geschrieben. Unten stehen die Fakten, die wir aus der Registry gelesen haben.

  • Verbindung: Läuft in der Cloud
  • Transport: Streamable HTTP
  • Kategorie: Design, Bilder & Audio

Installation

Wähle die KI-App, die du nutzt, und kopiere die Einstellungen.

Bevor du installierst

  • Basischecks: 2 von 3 bestanden
  • Läuft auf dem Server des Entwicklers: Was du fragst, läuft über dessen Server.
  • Kann 24 Dinge (Tools) decode_cable_code, design_cable, find_equivalents, overhead_conductor …
  • Die Registry nennt keinen Schlüssel zum Eintragen.

Du brauchst

Welche App nutzt du?

Wähle oben deine App. Wir merken sie uns, damit der Button beim nächsten Mal „In … installieren“ anzeigt.

Funktioniert in Claude im Web, auf dem Desktop und auf dem Handy:

  1. Öffne Settings → Connectors
  2. Tippe auf Add custom connector
  3. Füge die Adresse unten ein und tippe auf Add
  4. Wenn eine Anmeldung verlangt wird, melde dich beim Dienst des Entwicklers an
SettingsConnectors1+ Add2https://…3
https://thecablecode.com/mcp

Führe das in deinem Terminal aus

claude mcp add --transport http thecablecode https://thecablecode.com/mcp

In Cursor öffnen

Oder kopier die Einstellungen selbst

In .cursor/mcp.json in deinem Projekt oder in ~/.cursor/mcp.json einfügen

{
  "mcpServers": {
    "thecablecode": {
      "url": "https://thecablecode.com/mcp"
    }
  }
}

Dein Browser fragt, ob er die App öffnen darf, dann zeigt die App die Einstellungen und bittet dich um Bestätigung. Schlüsselwerte bleiben leer, damit du sie selbst einträgst.

In VS Code öffnen

Oder kopier die Einstellungen selbst

In .vscode/mcp.json in deinem Projekt einfügen

{
  "servers": {
    "thecablecode": {
      "type": "http",
      "url": "https://thecablecode.com/mcp"
    }
  }
}

Dein Browser fragt, ob er die App öffnen darf, dann zeigt die App die Einstellungen und bittet dich um Bestätigung. Schlüsselwerte bleiben leer, damit du sie selbst einträgst.

ChatGPT verbindet sich nur mit Servern im Internet:

  1. Öffne ChatGPT im Web → Settings → Connectors (Apps)
  2. Tippe auf Create oder Add (bei manchen Tarifen musst du zuerst Developer mode unter Advanced einschalten)
  3. Füge die Adresse unten ein, gib ihr einen Namen und speichere
  4. Wenn eine Anmeldung verlangt wird, melde dich beim Dienst des Entwicklers an
SettingsConnectors1+ Create2https://…3
https://thecablecode.com/mcp

Menünamen können sich je nach Tarif und mit der Zeit leicht unterscheiden.

Deine Auswahl bleibt in einem Cookie auf diesem Gerät; kein Konto nötig.

Diese Einstellungen werden aus dem Registry-Eintrag des Entwicklers erzeugt. Wenn in der README etwas anderes steht, folge der README.

Was er kann

Tool-Namen und -Beschreibungen genau so, wie der Server sie am 6. Nov. 2026 gemeldet hat. Geschrieben hat sie der Entwickler, nicht wir; wir zeigen sie als reinen Text.

  • decode_cable_code

    Decode a cable type designation (DIN VDE, HAR, BS/IEC, NEC, TS, UTE, CEI-UNEL and 62 more of its 69 coding systems, plus LAN and fibre) into its layers: conductor, insulation, screen, armour, sheath, with the source behind each symbol. Deterministic, no LLM.

  • design_cable

    Design and size a cable (power, control, LAN, coaxial, fibre) from a sentence (any site language, e.g. "3-core collective screen 12/20 kV 3x95/25 Al, longitudinally watertight") or a spec: every layer's thickness with its source (IEC 60502, HD 603 / 620, BS, EN 50525, NEC / UL an

  • find_equivalents

    Find the equivalents of a power cable in other countries' standards ("the Dutch equivalent of this Swedish cable"): the decoded cable is rebuilt under each target rule set (IEC 60502, HD 603, HD 620 sections J/M/D/C/K, BS 5467/6724/7846/6622, EN 50618, HD 627) with the same condu

  • overhead_conductor

    Look up a bare overhead line conductor (AAC, AAAC, ACSR, ACSR/AW: aluminium or alloy wires, with or without a zinc coated or aluminium-clad steel core): send its code, e.g. "242-AL1/39-ST1A" (EN 50182:2001 4.5) or an ACSS code "401-AL0/28-MEHST" (FprEN 50540 clause 4), or an EN 5

  • check_cable

    Check a power cable against a standard's nominal rules: a designation with size and voltage, a designer design, or the construction a maker's datasheet or tender offer states (layers with nominal and minimum thicknesses, screen and armour data). Rule sets: IEC 60502-1 / -2, IEC 6

  • extract_datasheet

    Read a power cable datasheet (a maker PDF, an https link to one, or pasted datasheet or tender text) into constructions: every cable size it states with voltage, cores, conductor, each layer with its nominal and smallest thickness, screen and armour data, diameters and the claime

  • read_tender

    Read a project or tender document (a purchase or project specification, a tender volume, a GTP / data schedule; a PDF of up to 80 pages and 20 MB, or its text) and answer what it asks for: every cable it lists built as a design by the designer's rules and checked against its rule

  • write_specification

    Write the cable specification for a tender: one cable, or a project of up to 30 cables, each as design_cable takes it (a sentence, a bare designation, a spec or a design), plus the project's requirements (rodent, termite, UV, cold, oil, watertightness, fire, armour and more, each

  • design_presets

    List what the cable designer builds, before calling design_cable: presets[] (power, MV, HV, North American, building wire, cords, control, LAN, coaxial, fibre), each with its id, standard, the sentence that builds it in design_cable, its designation (name), voltage, cores, sectio

  • drum_fit

    Which cable drum (reel) a length of cable needs, or how much one drum takes: whole layers and whole turns wound nested (each turn in the groove of the layer below, layers rising 0.866 dc) on a wound diameter of 1.05 x OD with a freeboard under the flange rim; cable makers' own ca

  • burial_depth

    The minimum burial cover for a power cable by country, voltage and location (open ground, road, pavement; direct or in a raceway for the US and Australia), from the rule the site holds for that country (national rules, HD 603 / HD 620 parts, NEC 2026 Tables 300.7(A) and 305.15(A)

  • fire_class

    The lowest fire class or listing a country asks for in a kind of building or space (escape route, general area, high-rise, tunnel, hospital, data centre, plenum, riser, railway) for DE, ES, FR, GB, IT, TR and US: the rule lines with their sources and seen levels, makers' declarat

  • awg_metric

    AWG / kcmil against IEC 60228 mm², both ways, by area and by maximum resistance at 20 °C (4/0 AWG is not 95 mm²), each size with its resistance and source (NEC Chapter 9 Table 8, UL 1581 Table 30.3, IEC 60228:2004 Table 2); with k, the ICEA insulation constant K (MΩ·1000 ft at 15

  • conduit_fill

    NEC Chapter 9 conduit fill: the smallest trade size of a raceway type (EMT, IMC, RMC, PVC, ENT, FMC, LFNC, LFMC, HDPE ...) that holds a list of conductors or cables, their areas from Tables 5, 5A and 8 (or a cable by its diameter) against Table 1's 53 / 31 / 40 % (60 % for a nipp

  • pull_cable

    The designer's pull calculation on a route of straights and bends (a conduit or rollers): the tension out of each segment pulled from either end, the sidewall bearing pressure at each bend, the jam ratio, clearance and fill, against the allowable tension and pressure with their s

  • tray_fill

    The NEC cable tray fill (392.22, Tables 392.22(A)(1), (A)(5), (A)(6), (B)(1)) and the ampacity of each cable in the tray (392.80), for 2000 V and below and Type MV: the fill against the allowable area or width, pass or fail, and each cable's derated ampacity with its table. For a

  • drum_loading

    The drum page's loading planner: how many vehicles of a type (box trailer, curtain-sider, open top, flat rack, containers, platform, rigid truck, or a custom box in full mode) a number of drums needs, by space and by payload, the rows and positions, chocks and bedding, the securi

  • cold_weather_check

    The Pro cold-weather check: the long-term mean daily minimum and mean temperature of a place in a month (NASA POWER monthly data of the place's grid cell, GeoNames places, a stored table: no outside call) against the design's minimum laying temperature with its source, and a verd

  • mv_electrical

    The Pro electrical values of a medium or high voltage design: capacitance, charging current, inductive reactance in trefoil and flat, a.c. resistance with the skin and proximity effects (IEC 60287-1-1), dielectric loss and the impulse levels (IEC 60502-2), every value with its so

  • economic_size

    The Pro economic size (the IEC 60287-3-2 method): the energy lost a year in this size and one and two sizes up, its present cost over the years, and the discounted payback of the larger size where its extra cost is given, each step with its formula and source. Always paid: the si

  • commissioning_sheet

    The Pro commissioning sheet for a design: the tests after installation of its voltage (the rows of design_cable after_installation, IEC 60502-2 clause 20, IEC 60840, IEC 62067, HD 620, BS, IEEE 400.2), each with its voltage, duration and source, as a PDF with fields to record the

  • cable_prep

    Prepare the end of an LV, MV or HV power cable for its termination or joint. The answer (thecablecode.prep/v1): steps[], each cut with the design's own depth and the diameter left; the makers' cut-back lengths for this voltage and size (makers' published instructions, unnamed, se

  • iec60287_rating

    The Enterprise IEC 60287 calculation: the continuous current rating of one circuit of three single cores of a medium or high voltage design, in trefoil or flat, buried direct, in buried ducts (one cable in each) or in free air, bonded at both ends, single-point or cross-bonded, a

  • equivalence_report

    The Pro equivalence report (server/pro/equivalence.ts, as a member downloads it under the equivalents panel): an IEC power cable in mm² against its North American counterpart in the same role (low voltage: XHHW-2 or USE-2 / RHW-2 (UL 44) or THHN / THWN-2 (UL 83) at the smallest A

Basischecksi

Wir prüfen Informationen, die jeder sehen kann; den Code haben wir nicht gelesen. Checks, die nicht zutreffen, werden nicht mitgezählt. · Geprüft am 7. Nov. 2026

  • ! Vorsicht

    Entwickler passt zum Repo

    Der Herausgeber (exquad) ist nicht der Repo-Inhaber (exquad); vielleicht hat jemand anderes ihn eingetragen

  • … Noch nicht geprüft

    Wird noch gepflegt

    Dieses Repo haben wir noch nicht von GitHub gelesen

  • … Noch nicht geprüft

    Hat eine Lizenz

    Dieses Repo haben wir noch nicht von GitHub gelesen

  • ✓ Bestanden

    Endpunkt antwortet

    Antwort in 145 ms (HTTP 200)

  • – Nicht zutreffend

    Anmeldung mit OAuth

    Keine Anmeldung nötig

  • ✓ Bestanden

    Keine versteckten Anweisungen in Tool-Beschreibungen

    Wir haben 24 Tool-Beschreibungen gelesen und keine versteckten Anweisungen an die KI gefunden

Im Vergleich mit anderen in Design, Bilder & Audioi

  • Mehr Sterne als 0 % der anderen 2184 Server in dieser Kategorie
  • Neuer in der Registry veröffentlicht als 93 % der anderen 2184 Server in dieser Kategorie
  • Basischecks gleich gut wie oder besser als bei 43 % der anderen 2184 Server in dieser Kategorie

Verglichen mit allen aktiven Servern dieser Kategorie in der Registry. Sterne zählen nur, wenn dem Herausgeber das Repo gehört.

Häufige Fragen

Ist The Cable Code sicher?

Er hat 2 von 3 zutreffenden Basischecks bestanden. Den Code haben wir nicht gelesen. Bevor du einen Schlüssel oder Token hinzufügst, sieh nach, welche Zugriffe der Server verlangt, und nutze einen Schlüssel, der nur die Berechtigungen hat, die du brauchst.

Welche Schlüssel oder Codes braucht er?

Die Registry nennt keinen erforderlichen Schlüssel, manche Server bitten dich aber bei der ersten Nutzung, dich anzumelden.

Läuft er auf meinem Computer oder in der Cloud?

Er läuft in der Cloud des Entwicklers. Du verbindest dich übers Internet, ohne etwas zu installieren, aber was du sendest, läuft über die Server des Entwicklers.

Wird er noch gepflegt?

Das GitHub-Repo wurde zuletzt – geändert, und die neueste Version (1.47.0) kam vorgestern in die Registry.

Welche Apps können ihn nutzen?

Apps, die MCP unterstützen, etwa Claude Desktop, Claude Code, Cursor und VS Code. Er verbindet sich per URL, also funktionieren auch Apps, die Remote-MCP-Server akzeptieren, zum Beispiel ChatGPT im Entwicklermodus.

Was kann ich stattdessen nutzen?

In derselben Kategorie: Figma Context MCP, Claude Real Video, Figma MCP Server

Alternativen

Server derselben Kategorie von anderen Entwicklern, sortiert nach Sternen.

So liest du eine Karte:★ GitHub-SterneiDrei Säulen: Bewertungen · Checks · NutzungiAktualisiert = neueste Version in der Registry veröffentlichti

Give your coding agent access to your Figma data. Implement designs in any framework in one-shot.

Läuft auf deinem Computer★ 16.165MITAktualisiert vor 5 Monaten
Installieren

Claude Real Video

von HUANGCHIHHUNGLeo

Let any LLM watch a video locally — and search everything it has ever watched.

Läuft auf deinem Computer★ 2.284MITAktualisiert vor 2 Monaten
Installieren

The Figma MCP server brings Figma design context directly into your AI workflow.

Läuft in der Cloud★ 2.152Aktualisiert vor 13 Monaten
Installieren

README vom Entwickler

Keine README im Repo gefunden

PopNx fragen