プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

emendrix

作者:emendrix.euバージョン 0.1.0i★ –iクラウドで動く
レジストリ名eu.emendrix/emendrix

インストール

概要

作者による説明(英語の原文)

Verified changes to watched EU acts, read-only, with each fact's source.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://emendrix.eu/mcp

ターミナルでこれを実行します

claude mcp add --transport http emendrix https://emendrix.eu/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "emendrix": {
      "url": "https://emendrix.eu/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "emendrix": {
      "type": "http",
      "url": "https://emendrix.eu/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://emendrix.eu/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月7日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • list_acts

    List the acts the record holds, with each act's label, aliases and sector from the site catalogue, its newest version, `updated_on` and the counts its index carries. `query` matches names case-insensitively; `domain` matches the catalogue's sector. An empty list means no held act

  • find_provisions

    Find touched provisions of one act whose canonical location string or stored heading contains `query`, each with its newest row. It never reads law text; an empty list means no touched provision of the act has that name in the window. Every list is complete for the watch window t

  • changes_since

    List recorded changes whose `basis` date is on or after `since`, newest first, with each row's event and provision pages: `updated_on` (the event or its latest repair), `detected_on` (when the run saw the event) or `in_force` (the change's in-force date; rows without one are left

  • provision_history

    Every recorded change to one top-level provision, newest first, with the window the record covers for the act. An empty list means no recorded change to that provision in the window, and the result says so in words. Every list is complete for the watch window the record covers, f

  • get_change

    One change in full: the verbatim text before and after, each side cut at `max_chars` (1 to 50000) with a marker '[… N characters omitted, continue with offset=M]' and paged by `offset`; the cited sentences with their URLs; `changed_within`; the three signals with their detail; `d

  • get_event

    One event of one act: its counts, repairs and stored corroboration (each signal's units, the pairwise agreements and disagreements), the units only the metadata or only the instruction parse names, and every row of the event. Every list is complete for the watch window the record

  • list_disputed

    Disputed rows grouped by their stored `dispute_reason`, each group with the sentence the site prints for that code. `omitted` counts rows past `limit`. An empty list means no recorded change in the window is disputed for that filter. Every list is complete for the watch window th

  • find_substance

    Find the entries that print a CAS or EC number, given with or without hyphens, in the newest version of each act the record holds, and every recorded change to them, each with its date, the amending act the change names and the file it was read from. It reports where a number app

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ! 注意

    作者とリポジトリが一致

    レジストリにソースのリポジトリが載っていないため、公開者(emendrix.eu)とコードを照合できません

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    359ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    8件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの18480件のうち0%よりスターが多い
  • このカテゴリのほかの18480件のうち69%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの18480件のうち36%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

emendrixは安全ですか?

当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.1.0)がレジストリに届いたのは20 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, SubA by entendu.

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者:formulahendry初期↓ 66/週★ 44014 か月前更新

パソコンで動く

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者:desktop-commander成長中★ 2113 日前更新

クラウドで動く✓ desktopcommander.app

SubA by entendu.

AI-assisted subtitle localization with project rules, glossaries, review and export.

作者:russellzhengrocks-arch今日更新

クラウドで動く

作者のREADME

リポジトリにREADMEが見つかりません

PopNxに聞く