プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

RoboSelect360 - Independent Humanoid Robot Intelligence

作者:Roboselect360バージョン 1.0.4i★ –iクラウドで動く
レジストリ名com.roboselect360/humanoid-robots

インストール

概要

作者による説明(英語の原文)

Humanoid robot intelligence: observed capabilities, BOM supply chain, pilot prep. Free and paid.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他
  • 入力が必要なもの:X-API-Key

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

「秘密」と表示された値は、あなたのアカウントの鍵です。絶対に人に教えたり、チャットに貼り付けたりしないでください。

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

このアドレスはリクエストの header にキーが必要ですが、コネクタを追加するメニューでは設定できません。代わりにClaude Code、Cursor、VS Codeを使ってください。

ターミナルでこれを実行します

claude mcp add --transport http humanoid-robots https://mcp.roboselect360.com/mcp --header 'X-API-Key: your-value'

動かす前に、空欄の値を入力してください。

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "humanoid-robots": {
      "url": "https://mcp.roboselect360.com/mcp",
      "headers": {
        "X-API-Key": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "humanoid-robots": {
      "type": "http",
      "url": "https://mcp.roboselect360.com/mcp",
      "headers": {
        "X-API-Key": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

このアドレスはリクエストの header にキーが必要ですが、コネクタを追加するメニューでは設定できません。代わりにClaude Code、Cursor、VS Codeを使ってください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

自分で入力する値

  • X-API-Key 秘密 HTTP header
    Optional RoboSelect360 key. Without it, the free tools are open; with it, the robots you have purchased are unlocked.

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月9日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • hardware_get_system_status

    Health of the SEMICONDUCTOR layer: profiles loaded, semiconductor signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • hardware_list_robots

    List the robot catalogue with filters, including semiconductor-layer scope and payload. Returns the same catalogue as the mechanical and software variants - call one, not three. Pick this one to filter on whether a robot is in scope for the semiconductor layer.

  • hardware_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus whether a per-robot semiconductor bill of materials exists for it. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference. Also returns observed_capabiliti

  • hardware_list_signals

    List semiconductor supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • hardware_get_robot_signals

    Active supply chain signals affecting one robot's semiconductor BOM. Requires an access right on the robot requested.

  • hardware_get_block_analysis

    Analyse one functional block of the semiconductor layer, for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • hardware_compare_robots

    Compare 2 to 5 robots side by side on semiconductor BOM, metrics, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • hardware_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its semiconductor BOM: geographic concentration, single-source exposure, export control. Requires an access right on the robot requested.

  • hardware_get_robot_hardware

    Semiconductor bill of materials for one robot: functional blocks, components, suppliers. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • mechanical_get_system_status

    Health of the MECHANICAL layer: mechanical profiles loaded, mechanical signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • mechanical_list_robots

    List the robot catalogue with filters, including mechanical-profile status and payload. Returns the same catalogue as the hardware and software variants - call one, not three. Pick this one to filter on mechanical coverage.

  • mechanical_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its mechanical-profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference. Also returns observed_capabilities: the evidence label per capabilit

  • mechanical_list_signals

    List mechanical supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • mechanical_get_robot_signals

    Active supply chain signals affecting one robot's mechanical BOM. Requires an access right on the robot requested.

  • mechanical_get_block_analysis

    Analyse one mechanical block (actuation, structure, energy, perception), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • mechanical_compare_robots

    Compare 2 to 5 robots side by side on mechanical BOM, specifications, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • mechanical_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its mechanical BOM: geographic concentration, critical raw materials, single-source exposure. Requires an access right on the robot requested.

  • mechanical_get_robot_mechanical

    Mechanical bill of materials for one robot: motors, reducers, screws, bearings, batteries, structure, wiring. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • software_get_system_status

    Health of the SOFTWARE layer: software profiles loaded, software signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • software_list_robots

    List the robot catalogue with filters, including software tier and software-profile status. Returns the same catalogue as the hardware and mechanical variants - call one, not three. Pick this one to filter by software tier.

  • software_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its software tier and profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference. Also returns observed_capabilities: the evidence label per ca

  • software_list_signals

    List software supply chain signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • software_get_robot_signals

    Active supply chain signals affecting one robot's software stack. Requires an access right on the robot requested.

  • software_get_block_analysis

    Analyse one software block (OS, middleware, runtime, control, fleet), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • software_compare_robots

    Compare 2 to 5 robots side by side on software BOM, TCO, jurisdiction exposure, lock-in and export control risk. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • software_get_dependency_profile

    Jurisdiction and supply chain dependency analysis for one robot, built on its software stack: jurisdiction concentration, lock-in, export control, cloud dependency. Requires an access right on the robot requested.

  • software_get_robot_software

    Software bill of materials for one robot: OS, middleware, AI runtime, motion control, fleet management. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • get_access_manifest

    What THIS connection can call right now: tools callable without any purchase, tools that need an access right, the robots you already hold, and the ones that can be unlocked. Free for everyone, no key and no account. Call it FIRST: it removes the need to discover your own access

  • get_robot_capabilities

    What one robot has actually been seen doing, and the evidence for each capability: a label per capability (in production, attested by a customer or third party, shown by the manufacturer, claimed only, published failure, no evidence found) and every dated observation behind it, f

  • get_robot_support

    After-sales support profile of one robot, for a buyer in Europe: warranty duration, start and exclusions, spare parts with dated offers (seller, price in original currency, availability, lead time), maintenance required of the operator, software updates and subscriptions, service

  • prepare_pilot

    Guides a buyer, one question at a time, through the G.R.O.U.N.D. method to a needs sheet for a first humanoid robot pilot: their need structured, what the market has proven on their task (counted across the panel, no robot named), and the vigilance points their answers trigger. S

  • build_pilot_decision_file

    Paid follow-up of prepare_pilot. From the buyer's dossier (as returned by prepare_pilot) and 1 to 5 robots chosen by the buyer (robot_ids, from list_robots), returns the full pre-pilot decision file in markdown: decision memo, the robots' announced facts, an evidence matrix per r

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月10日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン roboselect360.com で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    333ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    32件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの19013件のうち0%よりスターが多い
  • このカテゴリのほかの19013件のうち98%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの19013件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

RoboSelect360 - Independent Humanoid Robot Intelligenceは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

入力が必要なもの:X-API-Key

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.4)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, SwarmMemo

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者:formulahendry初期↓ 66/週★ 44014 か月前更新

パソコンで動く

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者:desktop-commander成長中★ 211今日更新

クラウドで動く✓ desktopcommander.app

SwarmMemo

Talk with agent swarms: rooms, private messages and paid tasks for AI agents

作者:Hugo0初期今日更新

クラウドで動く✓ swarmmemo.com

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

RoboSelect360 - Independent Humanoid Robot Intelligence (MCP)

Independent intelligence on humanoid robots - proven capabilities, real cost, supply chain and bills of materials - available as an [MCP](https://modelcontextprotocol.io) server.

Humanoid robots are moving from the lab to the factory, but the information needed to decide remains scattered, unverifiable or written by the manufacturers themselves. RoboSelect360 is an independent player in the humanoid robot ecosystem: it helps industrial leaders, buyers, integrators and developers move from demonstration to deployment.

QuestionWhat RoboSelect360 answers with
What can this robot actually do?Observed capabilities, each backed by a dated source - failures included, manufacturer claims never taken as proof
What does it really cost?Specs, pricing, availability and viability scoring; buyer-side TCO and ROI
What is inside, and from where?Semiconductor, mechanical and software bills of materials, with supply-chain and geopolitical dependency risk
What does regulation require?Regulatory alerts by country of the site in the pilot preparation tool; readiness dossiers by country (EU, France, UK, US, China, India)

Connect an MCP-compatible client and query the data directly - see Client support below.


Quickstart (free tier)

No key, no account, no install. Paste one address into your MCP client.

https://mcp.roboselect360.com/mcp

Claude Desktop or claude.ai - Settings, Connectors, Add custom connector, paste the address. Leave the OAuth fields empty. All 32 tools appear immediately: 11 answer for free, the others name the robot to buy to access them.

Other MCP clients - same address, no header. Clients without a connector screen can go through mcp-remote (requires Node.js):

npx -y mcp-remote https://mcp.roboselect360.com/mcp

A free rbs_ key is still needed for the REST API (api.roboselect360.com, header X-API-Key). Request one at roboselect360.com/en/contact.html.

See QUICKSTART.md for step-by-step instructions and examples/ for sample calls.

Client support

Verified with real users: Claude (desktop and web) connects with no key, no account and no configuration file: the full connector URL is all that is required. ChatGPT (custom connector) and Codex (codex mcp add roboselect --url https://mcp.roboselect360.com/mcp) work the same way on the free tier, and so does Kimi. The URL must carry the /mcp path: the bare hostname returns 404 and the connector fails at "Connect to the server".

For paid access with an rbs_ key, Claude is the verified client (key in the connector's X-API-Key header). Passing the key from ChatGPT or Codex has not been validated yet. Perplexity connects on the free tier through OAuth (verified 2026-10-18): it receives public data only, so purchased robots cannot be opened from it.

The server is standard MCP over Streamable HTTP, so any client that accepts an unauthenticated remote server should work. If you get it running elsewhere, tell us at contact@roboselect360.com and we will document it.


What the free tier gives you

All 32 tools are listed; 11 answer without a key - the robot catalogue, profiles and system status across the three teardown layers, plus the access manifest and the pilot preparation tool:

  • *_list_robots - the full robot catalogue
  • *_get_robot - full commercial profile of one robot, with its observed-capability labels (the strength of the best evidence per capability)
  • *_get_system_status - dataset coverage and freshness
  • get_access_manifest - what is open to you, and how to open the rest
  • prepare_pilot - the G.R.O.U.N.D. method: a needs sheet for a first humanoid robot pilot, one question at a time

(where * is hardware_, mechanical_ or software_).

Paid access unlocks the deep layers - bill-of-materials teardowns, dependency profiles, geopolitical and critical-material risk, cross-robot comparison, the observed capabilities of each robot with every dated observation, and its after-sales support profile. It is sold per robot, €390 excl. VAT, at roboselect360.com/en/tarifs.html, and opens that robot's full analysis. You receive an rbs_ key: add it as the X-API-Key header of your connector, on the same address. The same key works on the REST API.

The pilot decision file (build_pilot_decision_file, the paid follow-up of prepare_pilot) opens with its own access right, separate from robot access: request it at roboselect360.com/en/prepare-a-robot-pilot.html.

Connector headers can only be set when the connector is created: to add your key, delete the free connector and create it again with the header. Keep a single RoboSelect360 connector - two connectors expose the same tool names and leave your client unable to tell which one to call.


Also available

  • REST API - https://api.roboselect360.com (same X-API-Key)
  • Website & datasheets - roboselect360.com/en

License

Example code in this repository is released under the MIT License. The RoboSelect360 dataset, scoring methodology and teardown analyses are proprietary and are not included here - they are served through the API.


*RoboSelect360 - independent humanoid robot intelligence.*

PopNxに聞く