プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Eudr

作者:Vortx-AIバージョン 1.0.0i★ –iクラウドで動く
レジストリ名io.github.Vortx-AI/eudr

インストール

概要

作者による説明(英語の原文)

Compile EUDR Annex II Due Diligence Statements from operator, supplier, and plot geolocation.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://eudr.dev/mcp

ターミナルでこれを実行します

claude mcp add --transport http eudr https://eudr.dev/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "eudr": {
      "url": "https://eudr.dev/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "eudr": {
      "type": "http",
      "url": "https://eudr.dev/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://eudr.dev/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月9日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • eudr_check_plots

    Check up to six production plots for forest loss after 31 December 2020, the cut-off in Regulation (EU) 2023/1115. Takes GeoJSON boundaries, the commodity, and the country of production. Returns a per-plot verdict, the loss years observed, how much of each plot was inspected, and

  • eudr_fetch_evidence

    Retrieve the signed satellite facts behind a completed check, a page at a time, using the `evidence_cid` that check returned. Each entry is a content address that resolves at emem.dev and verifies offline against the responder's key. Use this when someone needs to audit or cite t

  • eudr_assess_evidence_gaps

    Check what each supplier's file is still missing against Article 9(1) of Regulation (EU) 2023/1115, the closed list of information an operator must hold before filing. Returns the unmet items with their article reference and what to request, separating items that block filing fro

  • eudr_lookup_reference

    Look up the country benchmark tier under Implementing Regulation (EU) 2025/1093, the Annex I commodity to HS-code mapping under Regulation (EU) 2023/1115, the seaports and airports a consignment can leave or enter through (UN/LOCODE), or which countries actually supply the Union

  • eudr_verify_receipt

    Verify a statement receipt: re-derive its content address from the canonical payload and check the ed25519 signature. Use it on a receipt a counterparty hands you. A valid signature establishes who signed and that the bytes are unchanged; it does not establish that the claim insi

  • eudr_prepare_dds

    Compile and sign an Annex II Due Diligence Statement. This WRITES: it stores a compile task holding the operator and supplier details you pass, and sends the plot geometry, HS code, country and quantity to emem.dev to be measured and independently signed. Operator and supplier id

  • eudr_get_dds

    Read the state of a compile started by eudr_prepare_dds. While it runs, returns the current state. Once finished, returns the verdict and the receipt's content address and signing key. The printable statement opens from the `report_url` that eudr_prepare_dds returned.

  • eudr_execution_trace

    The complete derivation chain behind a compiled statement, in order: polygon to grid addresses, signed measurements, the algorithm and the registries it was pinned against, cell verdicts to a consignment verdict, citations, and which of three independent keys signed what. A stage

  • eudr_import_shipments

    Parse a consignment list into structured shipments ready to check. Accepts a CSV export (the column set eudr.dev publishes) or a GS1 EPCIS 2.0 JSON-LD document. Returns one row per shipment with supplier, commodity, country, quantity and plot boundaries, plus a warning for every

  • eudr_export_statement

    Export a compiled statement as TRACES NT submission XML, signed Annex II JSON, or plot boundaries as GeoJSON. Exporting is not filing: nothing is submitted to any authority. TRACES export is refused for a non-negligible verdict, because Article 4(1) bars placing those goods and a

  • eudr_list_statements

    List the Due Diligence Statements already in the signed-in organisation's account, newest first, with verdict, reference, commodity, country, quantity and date. Use this to answer what has been filed, what is outstanding, and what a past consignment concluded, rather than asking

  • eudr_compliance_status

    Summarise the signed-in organisation's position: how many statements are filable, how many are blocked by a non-negligible verdict, how many are unresolved, broken down by commodity and country, plus outstanding supplier evidence requests. Answers "where do we stand" without enum

  • eudr_list_supplier_requests

    List the supplier evidence requests this organisation has issued: who was asked, whether they responded, and when each request expires. Answers which suppliers still owe plot boundaries and production details.

  • eudr_request_supplier_evidence

    Create a one-time link a supplier can use to submit their plot boundaries and production details straight into this organisation's account, without needing an account of their own. This writes: it creates a credential that lets whoever holds the link submit data to you, and retur

  • eudr_account_usage

    Report this organisation's credit balance, how many signed statements it will cover, and what has been spent. Checking plots, looking up references, assessing supplier gaps and reading traces cost nothing and are always available — only compiling a signed statement draws the bala

  • eudr_mitigation_status

    Report the Article 11 risk-mitigation plans this organisation has open against flagged shipments: which steps are outstanding, which article each discharges, whether a step needs a person or can be re-run automatically, and what evidence has been recorded. A non-negligible verdic

  • eudr_procurement_overview

    List the organisation's farms and its recent buying decisions (GO / GO WITH CONDITIONS / NEEDS A PERSON / NO-GO per destination), with which carry a recorded outcome and which were overridden. Use it to find a farm id before eudr_decide_lot, or to see how decisions have turned ou

  • eudr_decide_lot

    Run the organisation's own buying process on a banana lot from one of its farms: every destination in its library gets GO / GO WITH CONDITIONS / NEEDS A PERSON / NO-GO with the chance the whole chain holds, the margin P10/P50/P90, the most the buyer can pay and keep that outcome,

  • eudr_list_farms

    List the farms in this organisation's record: id, name, country, whether a boundary is confirmed and its area in hectares (geodesic, holes out), and how many EU statements were made for each. Read-only.

  • eudr_create_farm

    Add a farm to this organisation's record. A name is enough; give the crop, country and a pin (lat, lon) when known. Give its boundary as `boundary` (a GeoJSON Polygon or MultiPolygon, longitude first), or as `fields`: several field outlines (for example Fields of The World parcel

  • eudr_set_farm_boundary

    Set the boundary of a farm already in the record, as `boundary` (GeoJSON Polygon or MultiPolygon) or as `fields` to join into one farm (see eudr_create_farm). It becomes the farm's confirmed boundary, recorded as set by this agent credential, and what follows runs at once: the co

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月10日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント Vortx-AI で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    465ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    21件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの19023件のうち0%よりスターが多い
  • このカテゴリのほかの19023件のうち48%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの19023件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Eudrは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.0)がレジストリに届いたのは2 か月前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, KEVAREMESH Agent Discovery MCP

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者:formulahendry初期↓ 66/週★ 44014 か月前更新

パソコンで動く

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者:desktop-commander成長中★ 211今日更新

クラウドで動く✓ desktopcommander.app

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

EUDR compliance plugin

Checks agricultural plots against Regulation (EU) 2023/1115 (the EU Deforestation Regulation) and prepares the Due Diligence Statement an operator files before placing goods on the EU market.

Built for exporters, cooperatives, and procurement teams working on farm-to-consignment traceability — the people who have to produce evidence, not the people asking for farming advice.

Install

/plugin marketplace add Vortx-AI/eudr-plugin

/plugin install eudr@eudr

Or point Claude Code at a checkout of this repository:

claude --plugin-dir ./eudr-plugin

What it connects to

A remote MCP server at https://eudr.dev/mcp. No account, no API key, no credential to hand over: every tool below is reachable with an HTTP client. Nothing is installed or run on your machine; the plugin is the server address, three skills, and this file.

Tools

ToolWhat it doesWrites
eudr_check_plotsForest loss after the 31 Dec 2020 cut-off, per plotno
eudr_fetch_evidencePages the signed satellite facts behind a checkno
eudr_assess_evidence_gapsMissing Article 9(1) information, per supplierno
eudr_lookup_referenceCountry risk tiers, Annex I commodity mappingno
eudr_verify_receiptSignature and content address on a statementno
eudr_prepare_ddsStarts compiling an Annex II statementyes
eudr_get_ddsReads the outcome of a compileno
eudr_execution_traceThe full derivation chain behind a verdictno
eudr_import_shipmentsReads a CSV or GS1 EPCIS consignment listno
eudr_export_statementTRACES XML, Annex II JSON, or plot GeoJSONno

Prompts

Served by the MCP server, so they appear whether you install the plugin or add the connector on its own: check_plots, supplier_gaps, evidence_pack, verify_counterparty.

Skills

  • /eudr:evidence-pack — assemble a consignment's evidence
  • /eudr:supplier-gaps — which suppliers need chasing, and for what
  • /eudr:verify-statement — audit evidence a counterparty supplied

Scope, stated plainly

This covers Article 3(a), deforestation-free, which is observable from satellite. It does not cover Article 3(b), legality in the country of production — tenure, permits, free prior and informed consent, labour, tax. Those are documentary checks the operator carries out, and every tool response names them as unresolved rather than letting a clean forest-loss result read as a clean file.

Verdicts are reproducible from the signed per-cell evidence chain. Nothing is filed with any authority by this plugin.

Data

The plugin talks to one host. What goes where, and how long it stays:

EndpointWhat is sentKept
https://eudr.dev/mcp (MCP, operated by Vortx AI Private Limited)Whatever a tool is given: plot boundaries (GeoJSON) or points, commodity, HS code, country of production, quantity; for eudr_assess_evidence_gaps, the supplier fields you pass (name, postal address, email, plot counts, dates); for eudr_prepare_dds, the operator, supplier and product details of the statement; for eudr_import_shipments, the CSV or EPCIS fileA compiled statement and its signed receipt are kept as the operator's record for five years from submission (Regulation (EU) 2023/1115, Art. 4(3), 9(1), 12(5)). Working memory for a task is kept 7 days by default. The evidence handle behind a plot check is held for about a day
https://emem.dev (the Earth-observation service eudr.dev calls on its own side, same legal person)From eudr.dev, never from your machine: plot geometry, HS code, country of production and quantity, to be measured and independently signed. No operator or supplier identityThe signed satellite facts are public and content-addressed; they carry no identity

The plugin itself sends nothing anywhere else, stores nothing locally, and needs no credentials. The links in a result (for example a fact at https://emem.dev/v1/facts/ ) are only opened if you open them. Who does what with the data, the lawful basis, the processors and your rights are set out in the privacy notice: https://eudr.dev/privacy.

Licence

Apache-2.0. The eudr.dev runtime is closed; emem, the Earth-memory protocol the evidence comes from, is open source. Both are operated by Vortx AI Private Limited.

PopNxに聞く