프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Eeg MCP

제작자: AImplifier버전 0.2.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.AImplifier/eeg-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Real-time EEG: BrainFlow streaming, wall-clock replay, online DSP, recording, and stimulation.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "eeg": {
      "command": "uvx",
      "args": [
        "eeg-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add eeg -- uvx eeg-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "eeg": {
      "command": "uvx",
      "args": [
        "eeg-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "eeg": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "eeg-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 9일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 AImplifier 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 18669개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 18669개 중 75%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 18669개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Eeg MCP, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.0)은 13일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, CLIO Paraview

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

제작자: formulahendry초기↓ 66/주★ 44014개월 전 업데이트

내 컴퓨터에서 실행

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

제작자: desktop-commander성장 중★ 2114일 전 업데이트

클라우드에서 실행✓ desktopcommander.app

CLIO Paraview

Visualize simulation results in ParaView: load fields, then slice, contour, color and render them.

제작자: iowarp성장 중↓ 3.5천/주오늘 업데이트

내 컴퓨터에서 실행

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

⚡🧠 eeg-mcp

Real-time EEG for AI agents — stream, replay, visualize, record, stimulate

[Documentation](https://aimplifier.github.io/eeg-mcp/) · [Tutorial](https://aimplifier.github.io/eeg-mcp/examples/tutorial-first-realtime-session/) · [Hardware](https://aimplifier.github.io/eeg-mcp/hardware/) · [Safety](https://aimplifier.github.io/eeg-mcp/safety/) · [Tool Reference](https://aimplifier.github.io/eeg-mcp/tools/)

A Model Context Protocol server that gives an AI agent one interface over the live EEG workflow: acquisition from ~66 BrainFlow boards, wall-clock replay of existing recordings, stateful online DSP, a live browser monitor, crash-safe recording, and gated stimulation output.

The offline counterpart is [neuro-mcp](https://github.com/AImplifier/neuro-mcp) (MNE processing, source imaging, BIDS/EHR storage). This is the real-time half — everything that has to happen while the signal is still arriving.

Concept

flowchart LR

Researcher(["🔬 BCI Researcher"]) Clinician(["🩺 Clinician"]) Agent[["🤖 AI Agent"]] Server(("eeg-mcp FastMCP · 47 tools"))

Clinician -- talks to --> Agent Researcher -- talks to --> Agent Agent -- MCP --> Server

Server --> Acquire["Acquire 66 boards · replay at true rate"] Server --> Process["Process stateful online DSP custom plugins"] Server --> Watch["Watch & Record live monitor · HTML crash-safe .fif"] Server --> Stim["Stimulate LSL · TTL · TMS/tES 3 safety gates"]

classDef acq fill:#14b8a6,stroke:#0d9488,color:#fff classDef proc fill:#4f8cff,stroke:#2f5fbf,color:#fff classDef viz fill:#b06fe0,stroke:#7c3fae,color:#fff classDef stim fill:#eb5757,stroke:#b93b3b,color:#fff class Acquire acq class Process proc class Watch viz class Stim stim

Nobody calls a tool by hand — you talk to an agent in plain English and it drives the 47 tools underneath. The [tutorial](https://aimplifier.github.io/eeg-mcp/examples/tutorial-first-realtime-session/) shows what that looks like end to end, with no hardware required.

What it does

📡 Stream

66 BrainFlow board identifiers — OpenBCI, Muse, ANT Neuro, g.tec, Mentalab and more — plus a synthetic board that needs no hardware. Samples land in a ring buffer filled by a background thread, so tool calls read a live view instead of blocking on a device. When BrainFlow itself can't reach a board — e.g. Muse on Windows, blocked by an upstream SimpleBLE bug — board="lsl" attaches to an existing LSL outlet instead.

⏪ Replay

Play an EDF/BDF/GDF/SET/FIF or BrainFlow CSV *at the rate it was recorded*, re-emitting annotations as events at their original timings. Adds speed, seek, pause and looping. A pipeline developed against a file runs unchanged against hardware.

👁 Visualize

A loopback-bound, token-gated live browser view: rolling traces, event markers, band power, per-electrode quality, and transport controls. Plus self-contained HTML reports — no CDN, no external assets, opens on an air-gapped machine.

💾 Record

Write continuously to MNE-native .fif with the event log attached as annotations, plus a metadata row in a store schema-compatible with neuro-mcp. Crash-safe: an interrupted session is recoverable.

🧩 Extend

Plug in your own real-time processor — feature extractor, classifier, artifact gate, or EEG tokenizer for sequence models — and it runs on the same footing as the built-ins, inside the acquisition loop. → Extending

⚡ Stimulate

One send_stim_event contract over pluggable backends: LSL for software, BrainFlow's marker channel for sample-aligned embedding, serial/TTL and templated ASCII for hardware including TMS and tES — behind three safety gates.

[!NOTE]

One event log. Board markers, replayed annotations, dispatched

stimulations and manual notes all land in the same table on the same clock, with

absolute sample indices. A closed-loop run reconstructs afterwards with no clock join.

Install

conda create -n eeg-mcp python=3.11 -y && conda activate eeg-mcp

pip install eeg-mcp

Optional extras and MCP client registration

pip install "eeg-mcp[lsl]"      # LSL marker outlets (PsychoPy, OpenViBE, ...)

pip install "eeg-mcp[serial]" # serial/TTL trigger delivery to hardware

Register with an MCP client using an absolute path to the env's interpreter:

{

"mcpServers": { "eeg-realtime": { "command": "/path/to/envs/eeg-mcp/bin/python", "args": ["-m", "eeg_mcp"] } } }

Or with the Claude Code CLI:

claude mcp add eeg-realtime -- /path/to/envs/eeg-mcp/bin/python -m eeg_mcp

→ Full guide: [Installation](https://aimplifier.github.io/eeg-mcp/installation/)

Quick start

Ask your agent for the outcome; it picks the calls. No hardware required:

start_stream(session_id="s1", board="synthetic")

check_signal_quality(session_id="s1") # before trusting anything set_filters(session_id="s1", bandpass_low=1, bandpass_high=40, notch_freq=50) get_band_power(session_id="s1", seconds=2) start_monitor(session_id="s1") # → open the returned URL

Replay a real recording as if it were live, then keep the record:

inspect_recording(path="sub-04_rest.edf")

start_replay(session_id="r1", path="sub-04_rest.edf", speed=1.0) get_events(session_id="r1", origin="annotation") export_report(session_id="r1", notes="Routine review.")

flowchart LR

A["start_stream or start_replay"] --> B[check_signal_quality] B --> C[set_filters] C --> D["get_band_power get_psd"] C --> E[start_monitor] C --> P[attach_processor] A --> R[start_recording] D --> S[send_stim_event] P --> S R --> X[stop_recording] S --> X E --> X X --> Z[stop_stream]

classDef hot fill:#14b8a6,stroke:#0d9488,color:#fff class A,X hot

Documentation

Guide
🚀 [Installation](https://aimplifier.github.io/eeg-mcp/installation/)Environment, client registration, troubleshooting
📘 [Tutorial](https://aimplifier.github.io/eeg-mcp/examples/tutorial-first-realtime-session/)End to end, no hardware needed
⏪ Replay-Driven DevelopmentBuild against a recording, deploy live
🔁 Closed-Loop NeurofeedbackFeature → trigger, with a measured latency budget
🩺 Live Clinical ReviewVisual review, annotation, reporting
⚡ Stimulation ProtocolsTMS and tES through the safety gates
🧩 ExtendingWrite a custom processor or EEG tokenizer
🔌 Supported HardwareAll 66 boards, formats, stimulation transports
⚠️ SafetyRead before connecting a stimulator
🛠 Tool ReferenceAll 47 tools

The one design decision worth knowing

[!IMPORTANT]

Filtering happens in the producer thread, not at query time.

A stateful IIR filter must see every sample exactly once, in order. The common shortcut — filtering each query window independently — restarts the filter at every window boundary and injects a transient each time. It is invisible in a band-power plot and fatal for anything phase-sensitive.

So the producer filters each chunk once as it arrives, carrying sosfilt delay-line state forward, and writes to a second ring buffer. Queries just read.

flowchart LR

BF[Board / Recording] -->|poll| PR{{Producer thread}} PR -->|raw chunk| RB[(Raw ring buffer)] PR -->|stateful sosfilt| FB[(Filtered ring buffer)] PR -->|markers & annotations| EL[(Event log)] PR -->|append| DISK[(.fif on disk)] PR -->|streaming| PL[Your processors] RB & FB & EL --> Q[MCP tools]

classDef hot fill:#14b8a6,stroke:#0d9488,color:#fff class PR hot

The test suite asserts chunked filtering matches whole-signal filtering to 1e-9, *and* asserts as a control that the naive approach does not.

Consequence
Filters are causalNo zero-phase option — that needs future samples. stream_status reports group_delay_sec
Both buffers are keptread_window(filtered=false) always gets raw signal, to check whether a feature is real or an artifact
Indices are sharedAn event's sample_index means the same thing in either buffer

[!TIP]

Budget a closed loop as group delay + poll interval + dispatch latency —

measured at ~71 ms in the reference configuration. Good for neurofeedback;

not adequate for phase-locked stimulation.

Stimulation safety

[!CAUTION]

**This software is not a medical device and has not been validated for

clinical use. TMS and tES can cause harm, including seizure**. Use only

under a protocol approved by your ethics board, on a rig whose device-level

interlocks are intact, with a trained operator present.

Three gates apply to every hardware backend:

#GateEffect
1ConfigHardware backends refuse to open unless the server was started with EEG_MCP_ALLOW_HARDWARE_STIM=1. An agent cannot set this.
2Armingarm_stim permits dispatch for a window that *expires*, so a stalled agent cannot resume and fire later
3LimitsIntensity, duration and interval are clamped; violations raise rather than silently saturate

None of this replaces the interlocks on the device itself.

[!WARNING]

**The hardware backends are generic transports driven by command templates you

supply from your device's manual — not vendor drivers, and none has been tested

against a physical stimulator.** A plausible-looking untested driver would be

worse than none: it would fail silently while connected to something pointed at

a person's head.

Start every protocol on backend="log", which accepts everything and emits nothing.

Verify

python testing/verify.py                    # core correctness

python testing/verify_recording.py # recording + metadata store python testing/verify_processing.py # plugin processors python testing/persona_bci_researcher.py # engineer workflow python testing/persona_clinician.py # clinician workflow

All five drive the real server through FastMCP's in-memory client and assert against planted ground truth:

  • a spike planted at an annotation onset lands at t = 0 ± 0 ms in the extracted epoch — prov

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기