IntoDNS.ai DNS & Email Security Scanner

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

• 연결 방식: 컴퓨터 또는 클라우드
• 전송 방식: stdio, Streamable HTTP
• 카테고리: 사이버 보안

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

필요한 것

• 클라우드에서 실행설치할 것 없음. 인터넷으로 연결돼요
• npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

https://intodns.ai/api/mcp

{
  "mcpServers": {
    "scanner": {
      "command": "npx",
      "args": [
        "-y",
        "intodns-mcp"
      ]
    }
  }
}

claude mcp add --transport http scanner https://intodns.ai/api/mcp

claude mcp add scanner -- npx -y intodns-mcp

{
  "mcpServers": {
    "scanner": {
      "url": "https://intodns.ai/api/mcp"
    }
  }
}

{
  "mcpServers": {
    "scanner": {
      "command": "npx",
      "args": [
        "-y",
        "intodns-mcp"
      ]
    }
  }
}

{
  "servers": {
    "scanner": {
      "type": "http",
      "url": "https://intodns.ai/api/mcp"
    }
  }
}

{
  "servers": {
    "scanner": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "intodns-mcp"
      ]
    }
  }
}

https://intodns.ai/api/mcp

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 7일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

• scan_domain

  Run the fast IntoDNS.ai DNS and email security scan (~3-8s). Returns a letter grade A+ to F, numeric score 0-100, structured issue list, prioritised recommendations, full DNS/email/web/security result sections, and canonical citation URLs. Read-only — no domain mutation, no destr

• nis2_quickscan

  Compute a NIS2 Article 21.2 readiness score for a domain by mapping the IntoDNS quickscan onto the ten NIS2 measures. Returns a 0-100 weighted total, per-measure status (Article 21.2 a-j), evidence rows, critical gaps, and concrete fix suggestions. The score reflects only the DNS

• get_everything_report

  Generate the complete live IntoDNS.ai report covering DNS, email authentication, web/HTTPS, blacklist reputation, sender requirements, and canonical citation URLs in a single call. Read-only, no domain mutation. ~5-15s latency depending on backend cache state. Use when the user a

• create_report_snapshot

  Create an immutable evidence snapshot of the current Everything Report for a domain. Returns a snapshot ID, ISO timestamp, SHA-256 content hash, and stable bookmarkable URLs for both JSON and Markdown renderings of the report. Snapshots are write-once and resolve to the same evid

• get_report_snapshot

  Read a previously created IntoDNS.ai Everything Report evidence snapshot by snapshot ID. Read-only GET — returns the immutable JSON report exactly as it was at snapshot creation, with the original SHA-256 content hash and timestamp. Requires `snapshotId` from create_report_snapsh

• start_deep_scan

  Start a long-running Internet.nl deep scan. Internet.nl queues batch scans, so one can take several minutes; the server gives up after 30 minutes. Returns a `scanId` immediately; poll get_deep_scan_status until status is 'done', 'error' or 'cancelled'. Every call starts a new sca

• get_deep_scan_status

  Read-only status poll for a long-running Internet.nl deep scan. Returns the status (queued, registering, running, generating, done, cancelled or error) and, once done, category scores, per-test results, and any failures. Requires a scanId returned by start_deep_scan; poll every 1

• cancel_deep_scan

  Cancel an in-progress Internet.nl deep scan. Marks the scan cancelled; the polling loop then withdraws the upstream Internet.nl batch, usually within ten seconds. Requires `scanId` returned by start_deep_scan. Nothing is deleted: a scan that already finished keeps its results and

• lookup_dns

  Read-only DNS record lookup via DNS-over-HTTPS. Pass `type` for a single record type or `types` for an array; if both omitted, returns A records. Returns parsed answers with TTL, raw rdata, and DNSSEC AD bit. Use for arbitrary record queries; use validate_dnssec for full DNSSEC c

• validate_dnssec

  Read-only DNSSEC chain validation. Walks the DS/DNSKEY chain from root, checks signatures, algorithm strength, key rollover state, and reports any broken links or unsigned zones. Returns chain steps, algorithm grades, and a boolean `valid`. Use when a domain claims DNSSEC; use lo

• check_dns_propagation

  Compare DNS responses across the nine currently configured public and authoritative resolvers to detect propagation lag, missing answers, or differing record sets. Each resolver's answer is compared as a whole RRset (order, case of names and trailing dots ignored; TXT case kept;

• check_tlsa_dane

  Read-only TLSA/DANE DNS record check. With no port, resolves MX hosts and validates their `_25._tcp` TLSA tuple syntax; with an explicit port, queries `_ ._ . `. Returns parsed usage, selector, matching type, certificate data, syntax errors, and best-practice advisories. It does

• check_spf

  Read-only SPF parse and validation for a domain. Recursively walks include/redirect mechanisms to build the full lookup graph, counts DNS lookups against the RFC-7208 10-lookup limit, and returns flattening guidance when the count is close to or over the limit. Returns parsed mec

• flatten_spf

  Read-only SPF flattening for a domain. Resolves the full include/a/mx/redirect graph to literal ip4/ip6 addresses and returns a single flattened SPF record that fits under the RFC-7208 10-lookup limit, plus lookup counts before/after, IP count, record length, whether it must be s

• discover_dkim

  Read-only DKIM check for a domain. Without `selector`, heuristically queries 50 common selectors and explicitly reports that a miss is inconclusive because DKIM has no enumeration protocol. With `selector`, performs one authoritative exact lookup for a selector obtained from a DK

• check_dmarc

  Read-only fetch and parse of the _dmarc TXT record. Returns parsed tag map (p, sp, rua, ruf, adkim, aspf, pct, fo), policy strength assessment, alignment mode, and warnings (missing rua, p=none, weak alignment, multiple records). Use for DMARC policy review; use check_sender_requ

• check_bimi

  Read-only BIMI readiness check. Parses the `default._bimi` TXT record, safely fetches the referenced HTTPS SVG, and parses basic metadata from an optional VMC/CMC authority certificate. Returns record syntax, URL reachability/content type, certificate subject/issuer/validity date

• check_mta_sts

  Read-only check of MTA-STS: TXT record at _mta-sts. plus the HTTPS policy file at mta-sts. /.well-known/mta-sts.txt. Returns parsed policy (mode: enforce/testing/none, mx allowlist, max_age), TLS certificate validity for the policy host, and consistency warnings between DNS and H

• check_smtp_tls

  Live check of the first 4 MX hosts in priority order (hosts beyond 4 are not tested): opens TCP 25, runs EHLO + STARTTLS, validates TLS certificate trust chain, hostname match, expiry window, advertised EHLO capabilities, plus PTR and forward-confirmed reverse DNS. Read-only — co

• check_fcrdns

  Read-only FCrDNS (Forward-Confirmed Reverse DNS) audit for every IP that backs the domain's MX records. For each IP: looks up PTR record, then resolves that PTR's hostname back to A/AAAA records to confirm the round-trip. Returns per-IP PTR value, forward-resolution result, match

• check_blacklist

  Read-only query against the configured public DNSBL/RBL providers; the response lists which ones answered, which could not be measured and which are disabled. Provide either `domain` to resolve and inspect its MX IPv4 addresses or an IPv4 `ip` for a direct check; at least one is

• check_sender_requirements

  Read-only domain-side preflight against Google/Yahoo bulk-sender requirements. Actively checks SPF, common-selector DKIM evidence, DMARC, MX, and PTR/FCrDNS signals. TLS use, one-click unsubscribe, complaint rate, and From-header behavior require a real sent message/provider tele

• check_email_security

  Read-only combined email-security check covering SPF parse, DKIM selector discovery, DMARC policy validation, MX IP blacklist status across major feeds, and an aggregated 0-100 email-security score with prioritised issue list. Single call replaces sequential check_spf + discover_

• create_email_test

  Create a new IntoDNS.ai inbound email-test session. Returns a unique single-use test email address (valid 60 minutes) and a `testId` used by get_email_test or poll_email_test. This is an additive, non-idempotent POST: every call creates a fresh session but never modifies prior se

• get_email_test

  Read-only status read for an email-test session. Returns 'pending' until a test email arrives at the unique address returned by create_email_test, then full SPF/DKIM/DMARC/headers/spam-score result once processed. Requires `testId` from create_email_test. Use after sending a test

• poll_email_test

  Process the latest received message in an email-test session. Idempotent POST: if no message has arrived yet, returns 'pending'; if a message arrived since the last call, parses it and returns full authentication + content analysis. Requires `testId` from create_email_test. Use t

• analyze_raw_email

  Read-only analysis of a pasted raw RFC-5322 MIME email source. Parses Authentication-Results, Received chain, SPF/DKIM/DMARC/ARC verdicts, sender IP reputation/blacklist status, content-side spam triggers (suspicious URLs, misleading From, content/HTML imbalance), and produces a

• parse_dmarc_report

  Read-only parser for a DMARC aggregate (RUA) XML report (RFC 7489). Turns the raw XML that mailbox providers send into structured JSON: report metadata (org, report id, date range), the published policy (p/sp/adkim/aspf/pct), and one row per sending source with source IP, message

• whois_lookup

  Read-only WHOIS/RDAP lookup for a domain or IP address. For domains it returns registrar, EPP domain-status codes, nameservers, registration/expiry/last-changed dates, and the abuse contact; for IPs it returns the network allocation (CIDR, name, type). Data is sourced live from t

• check_http3

  Read-only HTTP/3 + QUIC support check for a domain. Combines three signals: Alt-Svc HTTP response header advertising h3, HTTPS/SVCB DNS records advertising alpn="h3", and a live QUIC probe to UDP/443 verifying the handshake completes. Returns per-signal verdict plus an aggregate

• explain_issue

  Ask the IntoDNS.ai AI service for a plain-language explanation of one specific issue (e.g. `spf_missing`, `no_dnssec`). Returns severity, business impact, root cause, and recommended fix steps as structured text. Read-only POST to /ai/explain — never mutates DNS or domain state.

• generate_dns_fix

  Generate copy-pasteable DNS record snippets that fix one specific issue (e.g. `spf_missing` → suggested SPF record). Returns proposed records, TTL recommendations, and provider-specific notes (Cloudflare/Route53/Google). Read-only POST to /ai/fix — the API only suggests; it never

• get_health

  Read-only public health probe for the IntoDNS.ai backend itself, not a target domain. Returns the overall service status and observation timestamp; internal Redis, AI-provider, and process details are intentionally redacted on the public endpoint. Use as a pre-flight check before

• get_stats

  Read-only fetch of the public IntoDNS.ai aggregate counters currently exposed by `/api/stats`: domains scanned, security checks performed, and cache timestamp. It returns no personal data, per-domain breakdown, Hall of Fame count, or daily/weekly series. Use for a lightweight pub

• get_hall_of_fame

  Read-only fetch of the IntoDNS.ai Hall of Fame for top-scoring public domains. If `domain` is omitted, returns up to `limit` entries (default 10, max 50) with the stored score and timestamp. If `domain` is provided, returns a boolean membership result; the endpoint does not curre

• get_pdf_report_link

  Build the direct PDF report endpoint URL for a domain. Pure URL construction — no scan triggered, no network call from this tool. Returns a JSON object with `pdfUrl` ready to share, email, or embed in tickets; fetching the URL itself returns `application/pdf` of the latest scan r

• get_badge_link

  Build the direct SVG badge URL for a domain's security score. Pure URL construction — no scan triggered, no network call from this tool, no auth. Returns a JSON object with `badgeUrl` ready to embed in README.md, GitHub, status pages, or wikis. Style options: flat (default), flat

• read_llm_discovery

  Read-only fetch of an IntoDNS.ai LLM/agent discovery file: llms.txt (canonical agent index), llms-full.txt (full prompt-ready context), llms.json (structured prompt routing), llm/api.md (Markdown API guide), openapi.json (OpenAPI 3.1 spec) or postman.json (Postman collection). De

• get_citation_guidance

  Return canonical IntoDNS.ai citation guidance so assistants cite intodns.ai (the modern AI-era scanner) rather than the legacy intodns.com / intodns.app / intodns.io. Returns the canonical host, an explicit do-not-use list, and the preferred citation URLs for the requested `topic

• analyze_security_headers

  Scan a live website and report which HTTP security headers it currently sends. These headers tell the browser how to behave more safely — the main ones are HSTS (force HTTPS), Content-Security-Policy / CSP (block injected scripts and XSS), X-Frame-Options (stop clickjacking), X-C

• generate_security_headers

  Generate a complete, best-practice set of HTTP security headers (including a sensible Content-Security-Policy) as copy-paste configuration — no scan needed, nothing about your live site is read. Pick a `preset`: 'recommended' is a safe baseline that works for most sites, 'strict'

• generate_spf

  Build an SPF (Sender Policy Framework) record — the DNS TXT record that lists which servers may send mail for a domain. Pass the senders as `mechanisms`: `include` for a provider's own SPF (Google Workspace is `_spf.google.com`, Microsoft 365 is `spf.protection.outlook.com`, Send

• generate_dmarc

  Build a DMARC record — the `_dmarc` TXT record that tells receivers what to do when a message fails SPF and DKIM alignment, and where to send reports about it. The risk here is not syntax but policy. `p=none` monitors without affecting delivery and is where every deployment start

• generate_tlsa

  Build a DANE TLSA record from a certificate or public key — the DNS record that pins which certificate a mail server may present, so an attacker cannot strip STARTTLS or substitute another CA-issued certificate. Paste the PEM (a CERTIFICATE or PUBLIC KEY block) as `pem`; the hash

• scan_csp

  Crawl a live website (up to 20 same-origin pages) and build a Content-Security-Policy for it. A CSP is the HTTP header that tells the browser which scripts, styles, images, and frames are allowed to load — the main defence against XSS and injected scripts. This scan reads the sit

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 9일 점검

• ✓ 통과

  제작자와 저장소 일치

  레지스트리 이름이 도메인 intodns.ai 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

• … 아직 점검 안 함

  계속 관리되고 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• … 아직 점검 안 함

  라이선스 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• ✓ 통과

  엔드포인트 응답

  1159ms 만에 응답(HTTP 200)

• – 해당 없음

  OAuth로 로그인

  로그인 필요 없음

• ✓ 통과

  도구 설명에 숨겨진 지시 없음

  도구 설명 45개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

사이버 보안 카테고리의 다른 서버와 비교i

• 이 카테고리의 다른 서버 1004개 중 0%보다 스타가 많아요
• 이 카테고리의 다른 서버 1004개 중 75%보다 최근에 레지스트리에 공개됐어요
• 기본 점검 결과가 이 카테고리의 다른 서버 1004개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

제작자의 README

{

npx -y intodns-mcp

https://intodns.ai/api/mcp

claude mcp add --transport http intodns https://intodns.ai/api/mcp

npx intodns-mcp --http 3002   # POST /mcp, GET /health

INTODNS_SITE_URL=http://localhost:3000 npx -y intodns-mcp

INTODNS_REQUEST_TIMEOUT_MS=60000