프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Gws Connector

제작자: orieg버전 0.4.3i★ 2i내 컴퓨터에서 실행
레지스트리 이름io.github.orieg/gws-connector

설치 방법

What it does

Multi-account Google Workspace MCP — Gmail, Calendar, Drive, Sheets, Docs with smart routing.

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 채팅 및 이메일

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기6/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수18/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    Gws Connector을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Gws Connector을 쓰고 있다고 하거나 답에 Gws Connector 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Gws Connector에 연결할 수 없어요

Gws Connector는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Gws Connector에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

B · 채팅 및 이메일에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Gws Connector에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Gws Connector에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Cursor는 아직 Gws Connector에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Gws Connector에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

VS Code는 아직 Gws Connector에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Gws Connector에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Gws Connector을 쓰는 사람에게 물어보세요💬 토론 →

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.4.3
레지스트리 공개i
2026년 9월 25일
코드 마지막 변경i
2026년 11월 14일
제작자
orieg
패키지
mcpb: …/gws-mcp.mcpb
웹사이트
orieg.github.io
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 16일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 orieg 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 그저께

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/orieg-gws-connector.svg)](https://mcp.popnx.com/en/servers/orieg-gws-connector)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2069개 중 89%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2069개 중 32%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2069개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Gws Connector, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 그저께 변경됐고, 최신 버전(0.4.3)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: draw.io, Vexa, emailmd, Kite Discord Bot Builder, e2a — email for AI agents

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

draw.io

Create draw.io diagrams in chat from Mermaid or XML, shown live and interactive. 10,000+ shapes.

제작자: jgraph널리 사용됨★ 5.8천6일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · draw.ioPopNx 팀이 직접 써 봄

Vexa

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

제작자: Vexa-ai널리 사용됨★ 3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · vexa.ai

emailmd

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

제작자: anypost널리 사용됨↓ 5.4천/주★ 1.4천그저께 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · emailmd.dev

Kite Discord Bot Builder

Build and fix Discord bots from a chat. Kite hosts them 24/7, with no code to deploy.

제작자: merlinfuchs성장 중★ 334 저장소 전체의 별19일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · kite.onl

e2a — email for AI agents

Authenticated email gateway for AI agents — per-agent inboxes, HITL approval, SPF/DKIM verified.

제작자: tokencanopy성장 중★ 199 저장소 전체의 별4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · e2a.dev
비슷한 항목과 비교
이 항목
Gws Connector
draw.ioVexaemailmdKite Discord Bot Buildere2a — email for AI agents
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요예아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/42/45/54/44/4
라이선스MITApache-2.0Apache-2.0MITAGPL-3.0Apache-2.0
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

GWS Connector

Multi-account Google Workspace MCP server — connect multiple Gmail, Google Calendar, and Google Drive accounts with smart routing.

Works with Claude Code, Gemini CLI, GitHub Copilot, Cursor, OpenAI Codex, and any MCP-compatible client.

Why

Most AI coding assistants support a single Google account. If you use multiple Google accounts (personal + work, multiple clients, different orgs), you need to switch between them manually. This MCP server lets you connect them all at once and route requests by label, email, or domain.

Features

  • Multi-account — connect unlimited Gmail and Google Workspace accounts
  • Smart routing — target accounts by label (work), email, or domain
  • Per-account OAuth — different orgs can use their own GCP credentials
  • Secure storage — client secrets and tokens stored in OS keychain (file fallback on Linux without GNOME Keyring)
  • 49 tools — Mail (11), Calendar (7), Drive (3), Sheets (8), Docs (4), Contacts (2), Tasks (5), Slides (3), account management (6)
  • Account management — add, remove, set default, list accounts
  • Cross-platform — standard MCP server works with any compatible client

How it compares

There are several good Google Workspace MCP servers. GWS Connector is the one to pick when multiple accounts and operational simplicity matter:

Most GWS MCP serversGWS Connector
AccountsOne account per server instanceUnlimited accounts in one instance, routed by label / email / domain
Multiple orgsShared OAuth appPer-account OAuth — each org uses its own GCP credentials
Credential storage.env / plaintext token filesOS keychain (Keychain / GNOME Keyring / Credential Manager)
RuntimePython/Node + dependenciesSingle static Go binary, no runtime to install
ClientsUsually oneClaude Code, Gemini CLI, Copilot, Cursor, Codex, any MCP client
InstallManual configClaude Code plugin, Gemini extension, one-click .mcpb, MCP Registry

If you only ever use a single Google account and want the widest possible tool surface (Forms, Chat, Vault, …), a single-account server like taylorwilsdon/google_workspace_mcp may fit better. GWS Connector focuses on doing multi-account Gmail / Calendar / Drive / Sheets / Docs / Contacts / Tasks / Slides cleanly and securely.

Upgrading (Google Tasks)

The Google Tasks tools (gws.tasks.*) are added behind one new OAuth scope (tasks). Existing users must re-authorize each connected account so new tokens are minted with this scope:

/gws:reauth

Before approving the browser consent screen, review what the new scope grants — full read and write access to the account's Google Tasks lists and tasks. See the scope rationale table below for details.

You must also add the tasks scope and enable the Tasks API in your GCP project's OAuth consent screen configuration before re-auth, or the consent screen will reject the request. Until an account is re-authorized, the gws.tasks.* tools return an insufficient-scope error naming the reauth tool to run.

Upgrading — Contacts / People API

The Contacts tools (gws.contacts.search, gws.contacts.directory_search) add two new read-only OAuth scopes (contacts.readonly, directory.readonly). Existing users must re-authorize each connected account so new tokens are minted with these scopes:

/gws:reauth

Before approving the browser consent screen, review what the new scopes grant — read-only access to your Google Contacts and (for Workspace accounts) the organization directory. See the scope rationale table below for details.

You must also enable the People API and add the two new scopes in your GCP project's OAuth consent screen configuration before re-auth, or the consent screen will reject the request. gws.contacts.directory_search requires a Google Workspace account — personal Gmail accounts have no organization directory and receive a clear explanatory message instead of results.

Upgrading (Google Slides tools)

The Slides tools (gws.slides.*) add one new OAuth scope, https://www.googleapis.com/auth/presentations. Existing users must re-authorize each connected account so new tokens are minted with the Slides scope:

/gws:reauth

You must also enable the Slides API and add the presentations scope in your GCP project's OAuth consent screen configuration before re-auth, or the consent screen will reject the request (see Google Cloud Setup). Until you re-authorize, gws.slides.* calls return a scope error telling the agent to run gws.accounts.reauth; all other tools keep working.

Upgrading from v0.2.x

v0.3.0 adds native Google Sheets and Google Docs tools behind two new OAuth scopes (spreadsheets, documents). Existing users must re-authorize each connected account so new tokens are minted with these scopes:

/gws:reauth

Before approving the browser consent screen, review what the new scopes grant — full read and write access to every spreadsheet and document in that account's Google Drive, including files shared with the account. See the scope rationale table below for details.

You must also add the two new scopes (and enable the Sheets and Docs APIs) in your GCP project's OAuth consent screen configuration before re-auth, or the consent screen will reject the request.

Quick Start (Claude Code)

1. Install the plugin — run these two commands inside Claude Code:

/plugin marketplace add orieg/gws-connector

/plugin install gws@gws-connector

2. Set up Google Cloud credentials — the interactive wizard walks you through everything:

/gws:configure

This creates a GCP project, enables APIs, and connects your first account. See Google Cloud Setup if you prefer manual steps.

3. Connect additional accounts:

/gws:add-account

Each account can use different OAuth credentials from different GCP projects.

Gemini CLI
gemini extensions install https://github.com/orieg/gws-connector

The binary is downloaded automatically on first use. Then connect accounts inside Gemini:

gws.accounts.add(label: "personal", clientId: "your-client-id", clientSecret: "your-secret")
Other clients

GitHub Copilot / Cursor / Codex / Any MCP client

Download a prebuilt binary or build from source:

git clone https://github.com/orieg/gws-connector && cd gws-connector && make build

Then configure your client:

ClientConfig
GitHub CopilotAuto-detects from .vscode/mcp.json, or add "command": "/path/to/gws-mcp" to VS Code MCP settings
CursorAuto-detects from .cursor/mcp.json, or add via Settings → MCP Servers
Codex CLIAuto-detects from codex.json
Claude Code (MCP only)claude mcp add --transport stdio gws-connector --scope user -- /path/to/gws-mcp --use-dot-names
Any MCP clientgws-mcp [--use-dot-names] over stdio

Connect accounts via MCP tool call:

gws.accounts.add(label: "personal", clientId: "your-client-id", clientSecret: "your-secret")

Environment variables (all optional): GWS_GOOGLE_CLIENT_ID, GWS_GOOGLE_CLIENT_SECRET, GWS_STATE_DIR

The --use-dot-names flag uses gws.mail.search naming; without it, tools use gws_mail_search.

Local development / testing

git clone https://github.com/orieg/gws-connector

cd gws-connector make build claude --plugin-dir ./

Use /reload-plugins inside the session after making changes. Run claude --debug --plugin-dir ./ to troubleshoot plugin loading.

Claude Desktop / MCPB bundle

Each release attaches a one-click `gws-mcp.mcpb` bundle. Download it and open it with Claude Desktop (Settings → Extensions → install from file), or drag it in. The bundle contains the binaries for macOS and Linux and picks the right one for your machine automatically. You still complete the Google Cloud setup and connect accounts on first use.

The server is also published to the official MCP Registry as io.github.orieg/gws-connector, so MCP clients that browse the registry can find and install it directly.

Docker

A multi-arch image is published to GHCR on each release:

docker run -i --rm ghcr.io/orieg/gws-connector:latest

The server speaks MCP over stdio. Interactive OAuth (accounts.add / reauth) opens a browser and stores secrets in the OS keychain, so it needs host access — day-to-day use is best via the native binary, the Claude Code plugin, or the Gemini extension. The image is well suited to headless stdio integrations and to registry/introspection checks. Persist the account registry across runs by mounting a volume and pointing GWS_STATE_DIR at it:

docker run -i --rm -v gws-state:/state -e GWS_STATE_DIR=/state \

ghcr.io/orieg/gws-connector:latest

Usage

All gws.* tools accept an optional account parameter:

# Uses default account

gws.mail.search(q: "is:unread")

Target by label

gws.cal.list_events(account: "work")

Target by email

gws.drive.search(account: "alice@company.com", q: "quarterly report")

Available tools
ToolDescription
gws.accounts.listList all connected accounts
gws.accounts.addConnect a new account (waits up to ~60s; returns pendingId if slower)
gws.accounts.reauthRe-authorize an account (waits up to ~60s; returns pendingId if slower)
gws.accounts.completeFinalize a pending OAuth flow (only needed if add/reauth returned pendingId)
gws.accounts.removeDisconnect an account
gws.accounts.set_defaultChange the default account
gws.mail.searchSearch messages (Gmail query syntax)
gws.mail.read_messageRead a specific message
gws.mail.read_threadRead an entire thread
gws.mail.create_draftCreate an email draft
gws.mail.send_draftSend an existing draft
gws.mail.forwardBuild a forward draft of a message (does not send)
gws.mail.get_attachmentFetch a message attachment's bytes (base64)
gws.mail.list_labelsList Gmail labels
gws.mail.create_labelCreate a new label
gws.mail.modify_messageAdd/remove labels on a message
gws.mail.get_profileGet account profile info
gws.cal.list_eventsList calendar events
gws.cal.get_eventGet event details
gws.cal.create_eventCreate a calendar event
gws.cal.update_eventUpdate/reschedule an event (patch semantics)
gws.cal.delete_eventDelete/cancel an event
gws.cal.free_busyQuery free/busy across calendars
gws.cal.list_calendarsList available calendars
gws.drive.searchSearch files in Drive
gws.drive.read_fileRead file content/metadata
gws.drive.list_folderList folder contents

| gws.sheets.read_range | Read a single A

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요