Picodev Lab

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

• 연결 방식: 클라우드에서 실행
• 전송 방식: Streamable HTTP
• 카테고리: 웹 및 브라우저

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

필요한 것

• 클라우드에서 실행설치할 것 없음. 인터넷으로 연결돼요

어떤 앱을 쓰세요?

https://lab.picodev.fr/mcp

claude mcp add --transport http picodev-lab https://lab.picodev.fr/mcp

{
  "mcpServers": {
    "picodev-lab": {
      "url": "https://lab.picodev.fr/mcp"
    }
  }
}

{
  "servers": {
    "picodev-lab": {
      "type": "http",
      "url": "https://lab.picodev.fr/mcp"
    }
  }
}

https://lab.picodev.fr/mcp

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 7일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

• decode_capture

  Decode a ready logic capture of the session (browser or bench). protocol "uart" with channels {rx} and options {baud (300-1000000, 9600), bits (5-9, 8), parity (none, even, odd), stop (1, 2), invert (false)}; "spi" with {sck, mosi?, miso?, cs?} (one data pin at least) and options

• list_setups

  The setups: status available (open_session works) or soon (listed, cannot be opened yet), their modes (free, challenge) and their benches by kind (status open, or soon: not offered yet).

• open_session

  Create a session (mode: free or challenge). Give open_url to the human: nothing simulates until they open it in their browser.

• push_to_editor

  Replace the code in the human's browser and, if run, compile it in the lab's cloud and start it. The fallback of push_program: use it only when the toolchain to compile locally is missing (no arduino-cli, core or library).

• push_program

  Send a program compiled on the visitor's machine (Intel HEX text, 48 KiB at most, e.g. arduino-cli's .ino.hex) to the human's browser, which loads it in the simulator without compiling and, if run, starts it. files: the sources, shown read-only in the editor, never compiled. Duri

• read_simulation

  Last state (with circuit, the browser's components and wires), last compilation and the events after since_ms (2000 at most). `serial` is the full serial output of the current run (up to 16 KiB), reset at each compile and NOT starved by pin events: prefer it over reconstructing s

• set_visibility

  Change the visibility (private, link, public). Returns the viewer link; current viewers are disconnected.

• queue_join

  Take a place in the queue for benches of this kind (for example real or sim). The browser must be connected.

• queue_status

  The session's place: state none, waiting (position, estimated wait eta_s) or turn (bench, end of the turn ends_at, Unix seconds).

• queue_leave

  Give back the place in the queue, or the turn if it has started.

• close_session

  End the session now, as when it expires: the place or turn ends, viewers and the browser are disconnected, everything is forgotten.

• session_status

  The session's state without its events, cheap enough to poll: browser connected (owner), visibility, current viewer link (not renewed), viewers, created_at and expires_at (Unix seconds), run (compilations so far: event times restart at each), level and levels (null in free mode),

• submit_answer

  Challenge mode: propose `value` as the answer of the current level's test `test` (an answer test of the level's brief). One answer per second at most. The hub checks it and returns {test, ok}; the verdict is also shown in the bench. For a hint, ask the visitor to reveal one in th

• next_level

  Challenge mode: move to the next level, as the bench's "Next level" button, and only when it would be offered: every test of the current level passed and a next level exists. Returns {level, levels}, the new level (index); session_status's level changes with the bench's next stat

• capture_logic

  Record every edge of the requested pins (probes of the setup sheet; by default the logic ones) for duration_ms (1 to 10 000 ms). In the browser's simulation, in simulated time; during the session's turn on a real bench, at the bench's logic analyser, in real time (no browser or r

• capture_analog

  Sample the voltage of 1 to 4 board pins (the board's own numbers: Nano A0-A7 = 14-21, Uno A0-A5 = 14-19, Mega A0-A15 = 54-69; by default the setup's scope probes) at rate_hz (100 to 10 000) for duration_ms (1 to 10 000 simulated ms), 200 000 samples at most in all. An ADC input r

• read_capture

  State of a capture (recording, ready, failed) and its kind (logic, analog). Once ready, the measures per pin and, for a logic capture, the edges [t_us, pin, v], 2000 from offset; for an analog one, rate_hz and the samples, rows [mv_1, ...] in the order of pins (row k at k / rate_

• read_setup

  A served setup sheet (setup.json, files included; never a solution): board, components and wires (circuit), probes, levels (without their hints: hints come through read_simulation as the visitor reveals them). Plus, when it exists, schema.png, the starting circuit as the editor d

• push_circuit

  Free mode only: replace the circuit in the human's browser (the simulation stops). components: [{type, id, properties, x?, y?}] (the board is not a component), wires: [{id, start: {componentId, pinName}, end: {...}, color?, waypoints?: [{x, y}] (the wire's route, 16 points at mos

• bench_snapshot

  During the session's turn on a real bench: a photo of the bench, as an image, and t_ms, the instant of the photo in ms since the start of the turn (null when unknown). One every 2 seconds.

• spec_draft

  Draft the specification of the visitor's own project with Picodev's interview: you ask the visitor, this tool says what to ask next and makes the PDF. Nothing is sent and nothing is kept. Call it with the sections written so far (none at first). sections: {id: text in simple Mark

• brief_submit

  Send Picodev the specification of the visitor's project, as a PDF, or only return its preview (send=false). sections: {id: text in simple Markdown}, ids envelope, fonctionPrincipale, fonctions, alimentation, format, environnement, production, preferences (the 8 sections of a prod

• request_meeting

  Send Picodev a meeting request. contact: {name, email, company?, phone?}. context: the project in a few sentences (2000 characters at most): what the visitor wants to do, where they stand, what they did in the lab. availabilities: 1 to 10 slots {from, to}, ISO 8601 dates with a t

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 9일 점검

• ✓ 통과

  제작자와 저장소 일치

  레지스트리 이름이 GitHub 계정 PICODEV-SAS 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

• … 아직 점검 안 함

  계속 관리되고 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• … 아직 점검 안 함

  라이선스 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• ✓ 통과

  엔드포인트 응답

  105ms 만에 응답(HTTP 200)

• – 해당 없음

  OAuth로 로그인

  로그인 필요 없음

• ✓ 통과

  도구 설명에 숨겨진 지시 없음

  도구 설명 23개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

웹 및 브라우저 카테고리의 다른 서버와 비교i

• 이 카테고리의 다른 서버 1392개 중 0%보다 스타가 많아요
• 이 카테고리의 다른 서버 1392개 중 68%보다 최근에 레지스트리에 공개됐어요
• 기본 점검 결과가 이 카테고리의 다른 서버 1392개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

제작자의 README

저장소에서 README를 찾지 못했어요