프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

RoboSelect360 - Independent Humanoid Robot Intelligence

제작자: roboselect360.com버전 1.0.3i★ –i클라우드에서 실행
레지스트리 이름com.roboselect360/humanoid-robots

설치

개요

제작자가 쓴 설명(영어 원문)

Independent humanoid robot intelligence: capabilities, real cost, supply chain. Free and paid tiers.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타
  • 입력해야 할 값: X-API-Key

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

이 주소는 요청 header에 키가 필요한데, 커넥터 추가 메뉴에서는 넣을 수 없어요. 대신 Claude Code, Cursor, VS Code를 쓰세요.

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http humanoid-robots https://mcp.roboselect360.com/mcp --header 'X-API-Key: your-value'

실행하기 전에 빈 값을 채워 주세요.

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "humanoid-robots": {
      "url": "https://mcp.roboselect360.com/mcp",
      "headers": {
        "X-API-Key": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "humanoid-robots": {
      "type": "http",
      "url": "https://mcp.roboselect360.com/mcp",
      "headers": {
        "X-API-Key": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 주소는 요청 header에 키가 필요한데, 커넥터 추가 메뉴에서는 넣을 수 없어요. 대신 Claude Code, Cursor, VS Code를 쓰세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

  • X-API-Key 비밀 HTTP header
    Optional RoboSelect360 key. Without it, the free tools are open; with it, the robots you have purchased are unlocked.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 8일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • hardware_get_system_status

    Health of the SEMICONDUCTOR layer: profiles loaded, semiconductor signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • hardware_list_robots

    List the robot catalogue with filters, including semiconductor-layer scope and payload. Returns the same catalogue as the mechanical and software variants - call one, not three. Pick this one to filter on whether a robot is in scope for the semiconductor layer.

  • hardware_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus whether a per-robot semiconductor bill of materials exists for it. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • hardware_list_signals

    List semiconductor supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • hardware_get_robot_signals

    Active supply chain signals affecting one robot's semiconductor BOM. Requires an access right on the robot requested.

  • hardware_get_block_analysis

    Analyse one functional block of the semiconductor layer, for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • hardware_compare_robots

    Compare 2 to 5 robots side by side on semiconductor BOM, metrics, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • hardware_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its semiconductor BOM: geographic concentration, single-source exposure, export control. Requires an access right on the robot requested.

  • hardware_get_robot_hardware

    Semiconductor bill of materials for one robot: functional blocks, components, suppliers. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • mechanical_get_system_status

    Health of the MECHANICAL layer: mechanical profiles loaded, mechanical signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • mechanical_list_robots

    List the robot catalogue with filters, including mechanical-profile status and payload. Returns the same catalogue as the hardware and software variants - call one, not three. Pick this one to filter on mechanical coverage.

  • mechanical_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its mechanical-profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • mechanical_list_signals

    List mechanical supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • mechanical_get_robot_signals

    Active supply chain signals affecting one robot's mechanical BOM. Requires an access right on the robot requested.

  • mechanical_get_block_analysis

    Analyse one mechanical block (actuation, structure, energy, perception), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • mechanical_compare_robots

    Compare 2 to 5 robots side by side on mechanical BOM, specifications, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • mechanical_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its mechanical BOM: geographic concentration, critical raw materials, single-source exposure. Requires an access right on the robot requested.

  • mechanical_get_robot_mechanical

    Mechanical bill of materials for one robot: motors, reducers, screws, bearings, batteries, structure, wiring. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • software_get_system_status

    Health of the SOFTWARE layer: software profiles loaded, software signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • software_list_robots

    List the robot catalogue with filters, including software tier and software-profile status. Returns the same catalogue as the hardware and mechanical variants - call one, not three. Pick this one to filter by software tier.

  • software_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its software tier and profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • software_list_signals

    List software supply chain signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • software_get_robot_signals

    Active supply chain signals affecting one robot's software stack. Requires an access right on the robot requested.

  • software_get_block_analysis

    Analyse one software block (OS, middleware, runtime, control, fleet), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • software_compare_robots

    Compare 2 to 5 robots side by side on software BOM, TCO, jurisdiction exposure, lock-in and export control risk. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • software_get_dependency_profile

    Jurisdiction and supply chain dependency analysis for one robot, built on its software stack: jurisdiction concentration, lock-in, export control, cloud dependency. Requires an access right on the robot requested.

  • software_get_robot_software

    Software bill of materials for one robot: OS, middleware, AI runtime, motion control, fleet management. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • get_access_manifest

    What THIS connection can call right now: tools callable without any purchase, tools that need an access right, the robots you already hold, and the ones that can be unlocked. Free for everyone, no key and no account. Call it FIRST: it removes the need to discover your own access

  • get_robot_capabilities

    What one robot has actually been seen doing, and the evidence for each capability: a label per capability (in production, attested by a customer or third party, shown by the manufacturer, claimed only, published failure, no evidence found) and every dated observation behind it, f

  • get_robot_support

    After-sales support profile of one robot, for a buyer in Europe: warranty duration, start and exclusions, spare parts with dated offers (seller, price in original currency, availability, lead time), maintenance required of the operator, software updates and subscriptions, service

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 8일 점검

  • ! 주의

    제작자와 저장소 일치

    레지스트리에 소스 저장소가 없어서, 게시자(roboselect360.com)와 코드를 맞춰 볼 수 없어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    261ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 30개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 18477개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 18477개 중 65%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 18477개 중 36%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

RoboSelect360 - Independent Humanoid Robot Intelligence, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: X-API-Key

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.0.3)은 24일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Readfirst

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

제작자: formulahendry초기↓ 66/주★ 44014개월 전 업데이트

내 컴퓨터에서 실행

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

제작자: desktop-commander성장 중★ 2113일 전 업데이트

클라우드에서 실행✓ desktopcommander.app

Readfirst

What to read and check before changing a file: project rules, risks, checks and tests per file.

제작자: jeonghun917성장 중↓ 5.3천/주오늘 업데이트

내 컴퓨터에서 실행

제작자의 README

저장소에서 README를 찾지 못했어요

PopNx에게 묻기