Spree Commerce: open-source B2B and marketplace ecommerce
Open-source B2B and marketplace ecommerce; new stores include an MCP server for AI agents.
제작자가 쓴 설명(영어 원문)
Read-only Base mainnet reader. Verifies x402 payment settlements + AFTA federation status.
이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.
이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
TENSORFEED_RPC_URL비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.
필요한 것
어떤 앱을 쓰세요?
위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.
Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요
{
"mcpServers": {
"x402-base": {
"command": "npx",
"args": [
"-y",
"@tensorfeed/x402-base-mcp"
],
"env": {
"TENSORFEED_RPC_URL": "your-value"
}
}
}
}터미널에서 이 명령어를 실행하세요
claude mcp add x402-base --env TENSORFEED_RPC_URL=your-value -- npx -y @tensorfeed/x402-base-mcp실행하기 전에 빈 값을 채워 주세요.
프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요
{
"mcpServers": {
"x402-base": {
"command": "npx",
"args": [
"-y",
"@tensorfeed/x402-base-mcp"
],
"env": {
"TENSORFEED_RPC_URL": "your-value"
}
}
}
}브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.
프로젝트의 .vscode/mcp.json에 붙여 넣으세요
{
"servers": {
"x402-base": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@tensorfeed/x402-base-mcp"
],
"env": {
"TENSORFEED_RPC_URL": "your-value"
}
}
}
}브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.
이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.
선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 9일 점검
레지스트리 이름이 도메인 tensorfeed.ai 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: TENSORFEED_RPC_URL
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.1)은 5개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce
같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Open-source B2B and marketplace ecommerce; new stores include an MCP server for AI agents.
MCP server integrating with Stripe - tools for customers, products, payments, and more.
8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Read-only MCP server for verifying x402 USDC settlements on Base mainnet. Drop it into any MCP-compatible agent (Claude Desktop, Claude Code, Cursor, ChatGPT) to independently audit x402 payment receipts on-chain, parse publisher .well-known/x402 manifests, and check AFTA federation status. No private keys, no signing, no broadcasts.
npm install -g @tensorfeed/x402-base-mcp
Coinbase shipped Base MCP (the official mcp.base.org server, launched May 2026) as the *transact-side* MCP: it connects an agent to a Base Account and lets the agent propose swaps, transfers, and x402 payments that the user approves in-wallet.
This package, @tensorfeed/x402-base-mcp, is the *verify-side* MCP. Once an x402 payment has been made (by Base MCP, by a server-side @coinbase/x402 middleware, or by any other x402 client), this server lets the calling agent independently check the on-chain settlement, parse the publisher's /.well-known/x402 manifest, and audit the receipt. Read-only chain visibility, no wallet.
The two are complementary, not competing. Use Base MCP to pay. Use this MCP to verify.
x402 is a payment protocol where agents pay merchants in USDC on Base for paid API responses. When an agent receives a payment receipt back, it has two options for confirming that the settlement actually happened the way the receipt claims:
Most existing EVM MCP servers either require a private key (so the agent can also send transactions, which is operationally risky and unnecessary for verification), or are generic multi-chain readers that don't speak x402. This server is the read-only, x402-aware option. Drop it into a Claude Desktop or Claude Code session and any agent can verify x402 payments without operating a wallet.
The TensorFeed-flavor tools (verify_afta_federation, tf_payment_lookup) compose the same primitives against TF's canonical surfaces and demonstrate the pattern. Use them or ignore them; the generic tools work fine on their own.
Add to claude_desktop_config.json:
{
"mcpServers": { "tensorfeed-x402-base": { "command": "npx", "args": ["-y", "@tensorfeed/x402-base-mcp"] } } }
claude mcp add tensorfeed-x402-base -- npx -y @tensorfeed/x402-base-mcp
The server defaults to the public Base RPC (https://mainnet.base.org), which is fine for casual use. For heavier workloads, set an Alchemy or Infura URL via TENSORFEED_RPC_URL. The URL must match the allowlist in src/rpc/allowlist.ts; anything else falls back to the public endpoint and logs a warning to stderr.
export TENSORFEED_RPC_URL="https://base-mainnet.g.alchemy.com/v2/YOUR_KEY"
Affiliate links if you don't already have an account:
| Tool | Description |
|---|---|
balance | Native ETH balance for an address |
usdc_balance | USDC (Circle native bridged) balance for an address |
block_number | Latest Base block number |
get_tx_receipt | Full tx receipt with status, gas, and logs summary |
call | Read-only contract call (eth_call, never broadcasts) |
recent_transfers | USDC Transfer events involving an address over N blocks |
| Tool | Description |
|---|---|
verify_x402_settlement | Given a tx hash, expected recipient, and expected USDC amount, returns a structured verdict on whether the on-chain Transfer event matches. |
parse_x402_manifest | Fetches https://{domain}/.well-known/x402.json, returns the structured manifest. |
usdc_recent_payments_to | USDC transfers TO an address over N blocks; the merchant-side view. |
probe_x402_endpoint | Probes any https URL and reports whether it returns a canonical x402-paid 402 response with accepts[]. |
decode_x402_payment_payload | Offline decode of a base64 X-PAYMENT header (Coinbase x402 V2): returns scheme, network, version, EIP-3009 authorization, signature. |
| Tool | Description |
|---|---|
verify_afta_federation | Calls TensorFeed's AFTA certification endpoint for a domain, returns a scored checklist. |
tf_payment_lookup | Checks whether a tx hash is a USDC payment to TensorFeed's canonical wallet on Base. |
x402_publisher_health | Returns current outcome + 24h/7d uptime + recent series for a domain monitored by TensorFeed's hourly x402 status probe. |
afta_federation_members | Returns the canonical curated list of confirmed AFTA federation members (TF origin + federated members). |
Verify an x402 settlement (works on TensorFeed's first canonical V2 payment):
verify_x402_settlement({
tx_hash: "0xe20c57d8aa6df63f75ce7a4e4c0cab492eb7fa672a23cd8fd59967eb6b66bd67", expected_recipient: "0x549c82e6bFC54bdaE9A2073744CBC2AF5D1FC6D1", expected_amount_usdc: "0.02" }) // returns { ok: true, verified: true, matches: [...] }
Inspect a publisher's x402 manifest:
parse_x402_manifest({ domain: "tensorfeed.ai" })
Check AFTA certification:
verify_afta_federation({ domain: "tensorfeed.ai" })
Read-only chain-visibility MCP. The full picture is in SECURITY.md; the short version:
_origin: "external" marker so the calling agent knows the value came from a third party.npm audit signatures.Report security issues to security@tensorfeed.ai. Please do not file a public issue or CVE for an unfixed vulnerability.
MIT