프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Qgiv MCP by usefulapi

제작자: m190버전 1.23.5i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/qgiv

설치

개요

제작자가 쓴 설명(영어 원문)

Read Qgiv (Bloomerang Fundraising) donations, refunds, recurring gifts, P2P registrations, events.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 할 수 있는 일 21가지(도구) qgiv_list_recent_transactions, qgiv_list_transactions_by_date, qgiv_list_transactions_after_id, qgiv_get_transaction …
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://qgiv.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http qgiv https://qgiv.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "qgiv": {
      "url": "https://qgiv.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "qgiv": {
      "type": "http",
      "url": "https://qgiv.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://qgiv.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 8일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • qgiv_list_recent_transactions

    The most recent donations/transactions (newest first as Qgiv returns them): id, status, date, amount, fee, net, donor name and id, form, recurring link, payment type and last four card digits, fund. Donor contact details are left out unless include_contact is set; full card numbe

  • qgiv_list_transactions_by_date

    Transactions between two dates (inclusive), at most 31 days per call, paged with offset/limit. Same fields as qgiv_list_recent_transactions. Qgiv has no server-side paging, so a busy range is fetched whole and sliced; use a shorter range if it is too large. POST /reporting/transa

  • qgiv_list_transactions_after_id

    Transactions with an id greater than the given one, sorted by id ascending and paged with limit; next_after_id is the cursor for the next call (use it as after_id). Handy for syncing new gifts. POST /reporting/transactions/after/{id}.

  • qgiv_get_transaction

    One transaction in full: donation lines, fund/restriction, dedication, custom-field answers, event packages, registrations, refunds. Contact details only with include_contact; card data is reduced to the last four digits. POST /reporting/transactions/{id}.

  • qgiv_list_recent_refunds

    The most recent refunds (read-only): id, original transaction, refund and settle dates, amount, payment type, last four digits, fund. POST /reporting/refunds/last/{limit}.

  • qgiv_list_refunds_by_date

    Refunds between two dates (inclusive), at most 31 days per call, paged with offset/limit. POST /reporting/refunds/dates/{begin}:{end}.

  • qgiv_get_refund

    One refund in full by id (read-only; this server never issues refunds). POST /reporting/refunds/{id}.

  • qgiv_list_recurring_schedules

    Recurring donation schedules (read-only): id, start/end date, next billing date, frequency, amount, state, donor name and id, plus Qgiv's 12-month forecast. Filter by status active, paused, expired or deleted. Paged with offset/limit. POST /reporting/recurring/list or /reporting/

  • qgiv_get_recurring_schedule

    One recurring donation schedule by id (read-only; schedules cannot be changed here). POST /reporting/recurring/{id}.

  • qgiv_list_statements

    Monthly fee/payout statements: id, date, amount contributed, fees, refunded, debited, credited and the summary totals (without the per-transaction rows; use qgiv_get_statement for those). Paged with offset/limit. POST /reporting/statements/list.

  • qgiv_get_latest_statements

    The latest statement(s) for the organization or form, with summary totals (per-transaction rows left out). POST /reporting/statements/latest.

  • qgiv_get_statement

    One statement by id with its transaction rows (first 100 shown; donor names only). POST /reporting/statements/{id}.

  • qgiv_list_recent_registrations

    The most recent peer-to-peer (Hobnob) event registrations: id, category, registrant name, team, fundraising goal and amount raised. Contact details only with include_contact. POST /reporting/registrations/last/{limit}.

  • qgiv_list_registrations_by_date

    Peer-to-peer registrations between two dates (inclusive), at most 31 days per call, paged with offset/limit. POST /reporting/registrations/dates/{begin}:{end}.

  • qgiv_get_registration

    One peer-to-peer registration in full (purchase history, team, totals, child registrations). Contact details only with include_contact. POST /reporting/registrations/{id}.

  • qgiv_list_events

    Events (ticketed/auction events) on the forms the token covers: id, dates and the top-level settings. Set include_details for packages, questions and promo codes. Notification e-mail addresses are never returned. POST /events/list.

  • qgiv_list_pledges

    Pledge options configured on the form(s) (title, value, frequency, begin date, iterations, state), not donors' pledge records. POST /pledges/list.

  • qgiv_get_pledge

    One pledge option by id. POST /pledges/{id} (no package is sent, so nothing is changed).

  • qgiv_list_custom_fields

    Custom (additional-question) fields configured on the form(s): id, reference, title, input type, required flags, display flags. POST /customFields/list.

  • qgiv_list_report_mappings

    Report mappings (accounting export mappings) on the form(s): id, identifier, mapping data, export service, type. POST /reporting/mappings/list.

  • qgiv_get_report_mapping

    One report mapping by id. POST /reporting/mappings/{id}.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 8일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    11ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 21개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 18490개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 18490개 중 98%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 18490개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Qgiv MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.23.5)은 오늘 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, DiveTripPlanner

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

제작자: formulahendry초기↓ 66/주★ 44014개월 전 업데이트

내 컴퓨터에서 실행

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

제작자: desktop-commander성장 중★ 2113일 전 업데이트

클라우드에서 실행✓ desktopcommander.app

DiveTripPlanner

Cave diving sites worldwide: depths, required level, warnings, guides, fills and current conditions.

제작자: divetripplanner.com초기오늘 업데이트

클라우드에서 실행✓ divetripplanner.com

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Qgiv MCP by usefulapi

Use Qgiv from Claude, Cursor, or any MCP client — donations, refunds, recurring gifts, statements, peer-to-peer registrations, events and pledges, read-only. Hosted, no local install: connect with your own Qgiv credentials.

Live endpoint: https://qgiv.usefulapi.io/mcp · Homepage: https://usefulapi.io/qgiv

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://qgiv.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http qgiv https://qgiv.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "qgiv": { "url": "https://qgiv.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Qgiv credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/qgiv/

Tools

ToolTypeWhat it does
qgiv_list_recent_transactionsreadList recent transactions
qgiv_list_transactions_by_datereadList transactions by date range
qgiv_list_transactions_after_idreadList transactions after an id
qgiv_get_transactionreadGet transaction
qgiv_list_recent_refundsreadList recent refunds
qgiv_list_refunds_by_datereadList refunds by date range
qgiv_get_refundreadGet refund
qgiv_list_recurring_schedulesreadList recurring gift schedules
qgiv_get_recurring_schedulereadGet recurring gift schedule
qgiv_list_statementsreadList statements
qgiv_get_latest_statementsreadGet latest statements
qgiv_get_statementreadGet statement
qgiv_list_recent_registrationsreadList recent P2P registrations
qgiv_list_registrations_by_datereadList P2P registrations by date range
qgiv_get_registrationreadGet P2P registration
qgiv_list_eventsreadList events
qgiv_list_pledgesreadList pledge options
qgiv_get_pledgereadGet pledge option
qgiv_list_custom_fieldsreadList custom fields
qgiv_list_report_mappingsreadList report mappings
qgiv_get_report_mappingreadGet report mapping
qgiv_usage_statusmetaUsage status (free-tier meter)
qgiv_request_featuremetaRequest a missing feature
qgiv_upgrademetaUpgrade to Pro or Pro+
qgiv_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with qgiv_upgrade (it returns a Stripe Checkout link). Cancel any time with qgiv_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running qgiv_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Qgiv.

PopNx에게 묻기