Ble MCP Server

BLE MCP Server

A stateful Bluetooth Low Energy (BLE) Model Context Protocol (MCP) server for developer tooling and AI agents. Works out of the box with Claude Code, VS Code with Copilot, and any MCP-compatible runtime. Defaults to stdio (no HTTP, no open ports), with optional SSE and Streamable HTTP transports for remote access and multi-session use. Uses bleak for cross-platform BLE on macOS, Windows, and Linux.

Example: Let Claude Code scan for nearby BLE devices, connect to one, read characteristics, and stream notifications from real hardware.

Demo

7-minute video walkthrough — scanning a real BLE device, discovering services, reading values, and promoting flows into plugins.

---

Why this exists

You have a BLE device. You want an AI agent to talk to it — scan, connect, read sensors, send commands, stream data. This server makes that possible.

It gives any MCP-compatible agent a full set of BLE tools: scanning, connecting, reading, writing, subscribing to notifications — plus protocol specs and device plugins, so the agent can reason about higher-level device behavior instead of just raw UUIDs and bytes.

The agent calls these tools, gets structured JSON back, and reasons about what to do next — no human in the loop for each BLE operation.

What agents can do with it:

• Develop and debug — connect to your device, explore its services, read characteristics, test commands, and diagnose issues conversationally. "Why is this sensor returning zeros?" becomes a question you can ask.
• Iterate on new hardware — building a BLE device? Attach a protocol spec so the agent understands your commands and data formats as you evolve them.
• Automate testing — write device-specific plugins that expose high-level actions (e.g., device.start_stream, device.run_self_test), then let the agent run test sequences: enable a sensor, collect samples, validate values, report results.
• Explore — point the agent at a device you’ve never seen. It discovers services, probes characteristics, and builds up protocol documentation from scratch.
• Build BLE automation — agents controlling real hardware for real tasks: reading environmental sensors on a schedule, managing a fleet of BLE beacons, triggering actuators based on conditions.

---

Who is this for?

• Embedded engineers — faster iteration on BLE protocols, conversational debugging, automated test sequences
• Hobbyists and makers — explore BLE devices without writing boilerplate; let the agent help reverse-engineer simple protocols
• QA and test engineers — build repeatable BLE test suites with plugin tools, run them from CI or agent sessions
• Support and field engineers — diagnose BLE device issues interactively without specialized tooling
• Researchers — automate data collection from BLE sensors, explore device capabilities systematically

---

Quickstart (Claude Code)

pip install ble-mcp-server

Register the MCP server with Claude Code (read-only by default)

claude mcp add ble -- ble_mcp

Then in Claude Code, try:

"Scan for nearby BLE devices and connect to the one whose name starts with Arduino."

The server is read-only by default. Writes and plugins can control real hardware and execute code, and are opt-in via environment variables. See Safety for details.

---

What the agent can do

Once connected, the agent has full BLE capabilities:

• Scan for nearby devices, with optional name or service UUID filters
• Connect to a device and discover its services and characteristics
• Read and write characteristic values (writes require BLE_MCP_ALLOW_WRITES)
• Subscribe to notifications and collect streaming data — single events, polling, or batch draining
• Attach protocol specs to understand device-specific commands and data formats
• Use plugins for high-level device operations (e.g., sensortag.read_temp) instead of raw reads/writes
• Create specs and plugins for new devices, building up reusable knowledge across sessions

The agent handles multi-step flows automatically. For example, "read the temperature from my SensorTag" might involve scanning, connecting, discovering services, attaching a spec, enabling the sensor, and reading the value — without you specifying each step.

At a high level:

Raw BLE → Protocol Spec → Plugin

You can start with raw BLE tools, then move up the stack as your device protocol becomes understood and repeatable. See Concepts for how the pieces fit together.

---

Install (development)

# Editable install from repo root

pip install -e .

Or with uv

uv pip install -e .

MCP is a protocol — this server works with any MCP-compatible client. Below are setup instructions for the most common ones.

Add to Claude Code

# Minimal (read-only)

claude mcp add ble -- ble_mcp

Or run as a module

claude mcp add ble -- python -m ble_mcp_server

Enable writes

claude mcp add ble -e BLE_MCP_ALLOW_WRITES=true -- ble_mcp

Enable writes with an allowlist of characteristic UUIDs

claude mcp add ble \ -e BLE_MCP_ALLOW_WRITES=true \ -e BLE_MCP_WRITE_ALLOWLIST="2a00,12345678-1234-1234-1234-123456789abc" \ -- ble_mcp

Enable all plugins

claude mcp add ble -e BLE_MCP_PLUGINS=all -- ble_mcp

Enable specific plugins only

claude mcp add ble -e BLE_MCP_PLUGINS=sensortag,hello -- ble_mcp

Debug logging

claude mcp add ble -e BLE_MCP_LOG_LEVEL=DEBUG -- ble_mcp

Add to VS Code / Copilot

Add to your project's .vscode/mcp.json (or create it):

{

"servers": { "ble": { "type": "stdio", "command": "ble_mcp", "args": [], "env": { "BLE_MCP_ALLOW_WRITES": "true", "BLE_MCP_PLUGINS": "all" } } } }

Adjust env to match your needs — remove BLE_MCP_ALLOW_WRITES for read-only mode, or set BLE_MCP_PLUGINS to specific plugin names.

Add to Cursor

Add to your project's .cursor/mcp.json (or create it):

{

"mcpServers": { "ble": { "command": "ble_mcp", "args": [], "env": { "BLE_MCP_ALLOW_WRITES": "true", "BLE_MCP_PLUGINS": "all" } } } }

Environment variables

---

Tools

See Concepts for how everything fits together, and the Tools Reference for detailed input/output schemas.

---

Protocol Specs

Specs are markdown files that describe a BLE device's protocol — services, characteristics, commands, and data formats. They live in .ble_mcp/specs/ and teach the agent what a device can do beyond raw UUIDs and bytes.

Without a spec, the agent can still discover services and read characteristics. With a spec, it knows what the values mean and what commands to send.

You can create specs by telling the agent about your device — paste a datasheet, describe the protocol, or just let it explore and document what it finds. The agent generates the spec file, registers it, and references it in future sessions. You can also write specs by hand.

See Concepts for details on spec format and how the agent uses them.

---

Plugins

Plugins add device-specific shortcut tools to the server. Instead of the agent composing raw read/write sequences, a plugin provides high-level operations like sensortag.read_temp or ota.upload_firmware.

The agent can also create plugins (with your approval). It explores a device, writes a plugin based on what it learns, and future sessions get shortcut tools — no manual coding required.

To enable plugins:

# Enable all plugins

claude mcp add ble -e BLE_MCP_PLUGINS=all -- ble_mcp

Enable specific plugins only

claude mcp add ble -e BLE_MCP_PLUGINS=sensortag,ota -- ble_mcp

Editing an already-loaded plugin only requires ble_plugin_reload — no restart needed.

Background tasks

Plugins can start background asyncio tasks for continuous monitoring — periodic scans, data collection loops, etc. The plugin template includes commented examples for this pattern.

Background tasks are registered with the server via state.register_task(name, task), making them visible to the agent:

• ble_tasks_list — shows all running background tasks with status
• ble_tasks_cancel — stops a task by ID (safety net for runaway tasks)

Plugin notifications

Plugins can send MCP log notifications to the client via state.on_log_cb(level, message). This allows plugins