timesfm
TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.
Read-only history of UTM VMs on a Mac: CPU, memory, disk, network, ping, incidents (macOS only).
Originaltext des Herstellers
Skills, die der KI diese Art Arbeit beibringen; sie funktionieren zusammen mit diesem
TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.
Open-source intelligence for the global theater. Track everything from the corporate/private jets of the wealthy, and spy satellites, to seismic events in one unified interface. Hook an AI agent up to have it parse through data and find previously unseen correlations. The knowledge is available to…
scrape data from Google Maps. Extracts data such as the name, address, phone number, website URL, rating, reviews number, latitude and longitude, reviews,email and more for each place
Listen sind nach einem Nutzungswert (von 100) aus diesen Teilen sortiert
| Beliebtheit | 9/80 | GitHub-Sterne oder wöchentliche Downloads: der größere Wert zählt 60, der kleinere 20 |
|---|---|---|
| Aktualität | 12/12 | Volle Punkte für Release oder Codeänderung in 30 Tagen |
| Antwortet noch | 0/8 | Der Cloud-Endpoint antwortete bei der letzten Prüfung |
| Nutzungswert | 21/100 |
Qualität: 3/3 Basisprüfungen bestanden (angezeigt, nicht zur Sortierung) · Schwung: Noch keine Daten (Nur im Tab Im Trend verwendet)
Wähle die KI-App, die du nutzt, und kopiere die Einstellungen.
3/3 Prüfungen bestanden · Läuft auf deinem Computer
Zuerst: Welche KI nutzt du?
Wähle deine App, dann erscheinen die Schritte unten.
Claude kann UTM Watch noch nicht verbinden
Der Anbieter hat noch keine Installationsangaben im MCP-Verzeichnis
ChatGPT kann UTM Watch noch nicht verbinden
Der Anbieter hat noch keine Installationsangaben im MCP-Verzeichnis
Claude Code kann UTM Watch noch nicht verbinden
Der Anbieter hat noch keine Installationsangaben im MCP-Verzeichnis
Cursor kann UTM Watch noch nicht verbinden
Der Anbieter hat noch keine Installationsangaben im MCP-Verzeichnis
VS Code kann UTM Watch noch nicht verbinden
Der Anbieter hat noch keine Installationsangaben im MCP-Verzeichnis
Läuft auf deinem Computer; die Tool-Liste erscheint nach der Installation in deiner KI-App.
Wir prüfen Informationen, die jeder sehen kann; den Code haben wir nicht gelesen. Checks, die nicht zutreffen, werden nicht mitgezählt. · Geprüft am 20. Nov. 2026
Der Registry-Name wurde mit dem GitHub-Konto DarrickBM bestätigt, dem das Repo gehört
Code zuletzt geändert: vor 5 Tagen
Nutzt MIT
Dieser Server läuft auf deinem Computer; es gibt keinen Endpunkt im Internet
Läuft auf deinem Computer und nutzt stattdessen lokale Einstellungen
Läuft auf deinem Computer; Tool-Listen können wir nur von Endpunkten im Internet lesen
Wenn du das gebaut hast, füge diesen Code in dein README ein. Das Badge verlinkt auf diese Seite.
[](https://mcp.popnx.com/en/servers/darrickbm-utm-watch)Fragen, Tipps teilen oder melden, dass etwas nicht geht. Sortiert nach „hilfreich“.
Noch keine Beiträge. Stell die erste Frage oder teile einen Tipp.
Beiträge hier stammen von Nutzern, nicht vom PopNx-Team.
Noch keine Bewertungen
Verglichen mit allen aktiven Servern dieser Kategorie in der Registry. Sterne zählen nur, wenn dem Herausgeber das Repo gehört.
Er hat 3 von 3 zutreffenden Basischecks bestanden. Den Code haben wir nicht gelesen. Bevor du einen Schlüssel oder Token hinzufügst, sieh nach, welche Zugriffe der Server verlangt, und nutze einen Schlüssel, der nur die Berechtigungen hat, die du brauchst.
Die Registry nennt keinen erforderlichen Schlüssel, manche Server bitten dich aber bei der ersten Nutzung, dich anzumelden.
Er läuft auf deinem Computer. Deine KI-App startet ihn bei Bedarf, und die Daten laufen nicht über die Server des Entwicklers (außer der Server ruft selbst einen Onlinedienst auf).
Das GitHub-Repo wurde zuletzt vor 5 Tagen geändert, und die neueste Version (0.7.1) kam vor 8 Tagen in die Registry.
Apps, die MCP unterstützen, etwa Claude Desktop, Claude Code, Cursor und VS Code.
In derselben Kategorie: OpenSEO, Exa, Microsoft Learn MCP, Docs, COTAL actions (cotal.ai)
Gleiche Kategorie, andere Entwickler, Befehle bereits geprüft. Offizielle zuerst, dann nach Sternen.
So liest du eine Karte:↓ Downloads pro Wochei★ GitHub-SterneiDrei Säulen: Bewertungen · Checks · NutzungiAktualisiert = neueste Version in der Registry veröffentlichti
Keyword research, site audits, rank tracking and AI visibility for your AI agent.
Official Exa MCP for web search, content fetching, and multi-step research.
Official Microsoft Learn MCP Server – real-time, trusted docs & code samples for AI and LLMs.
Search and read Empryo's documentation. Read-only, no auth, no local access.
cotal.ai actions: product overview, site search, build log, feedback, Cloud waitlist, updates, calls
| Dieser UTM Watch | OpenSEO | Exa | Microsoft Learn MCP | Docs | COTAL actions (cotal.ai) | |
|---|---|---|---|---|---|---|
| Läuft wo | Wird auf deinem Rechner installiert | Läuft in der Cloud, keine Installation | Läuft in der Cloud, keine Installation | Läuft in der Cloud, keine Installation | Läuft in der Cloud, keine Installation | Läuft in der Cloud, keine Installation |
| Braucht Schlüssel | Nein | Nein | Nein | Nein | Nein | Nein |
| Mit + in Claude hinzufügen | Nein | Ja | Ja | Ja | Nein | Nein |
| Basisprüfungen | 3/3 | 5/5 | 2/4 | 4/4 | 4/4 | 4/4 |
| Lizenz | MIT | MIT | MIT | CC-BY-4.0 | NOASSERTION | Apache-2.0 |
| Preis | Keine Kosten im Register | Keine Kosten im Register | Keine Kosten im Register | Keine Kosten im Register | Keine Kosten im Register | Keine Kosten im Register |
Unverändert aus dem Repo des Entwicklers übernommen. PopNx MCP hat den Inhalt weder geprüft noch empfiehlt es ihn. HTML, Bilder und Skripte wurden entfernt. Links führen von dieser Website weg.
See what each of your [UTM](https://mac.getutm.app) virtual machines is doing, and find out why one was slow.
Install · Features · AI diagnosis · Fleet · How it works
UTM shows whether a VM is on or off. Activity Monitor shows two processes with the same name. Neither tells you which VM is eating the CPU, how close you are to running out of memory, or whether the lag your remote user felt came from the VM, the Mac, or the Wi-Fi. UTM Watch does.
| Question | UTM | Activity Monitor | UTM Watch |
|---|---|---|---|
| Which VM is using the CPU? | No | Process names only | Every VM by name |
| How full is each VM's disk? | No | No | Yes, read from the disk image |
| What happened at 3:12 pm? | No | No | Recorded history you can scrub |
| Was it the VM, the Mac or the network? | No | No | Ping and link quality next to VM load |
UTM Watch is an independent project. It is not affiliated with or endorsed by the UTM project.
Requires an Apple silicon Mac. Built and tested on macOS 26; set to run on macOS 14 or later, but older versions are untested.
One command (recommended). Installs the menu bar app into /Applications, then starts the app:
curl -fsSL https://raw.githubusercontent.com/DarrickBM/utm-watch/main/install.sh | bash
The script is short; read it first if you prefer: install.sh.
Or by hand. Download UTMWatch- -macos-arm64.dmg from the latest release, open it, and drag UTM Watch into Applications. The app is not notarized by Apple, so the first time macOS will refuse to open it. Go to System Settings, then Privacy & Security, and click Open Anyway, or run this once:
xattr -dr com.apple.quarantine /Applications/UTMWatch.app
First launch. macOS asks for three permissions: access to data from other apps (UTM's VM files), control of UTM, and the local network (pings to your router and VMs). The app keeps working if you deny one, with less detail.
[!IMPORTANT]
After an update, give the permissions again.
macOS treats the updated app as new. It asks for control of UTM again, and it may refuse UTM's VM files until you turn Full Disk Access for UTM Watch off and on again in System Settings › Privacy & Security, then quit UTM Watch and open it again. If it keeps refusing, use Reset and ask again… in UTM Watch's Settings › Permissions. Until then VMs show without their names, limits or disk usage.
| Part | What it does |
|---|---|
Menu bar app (UTMWatch.app) | Live figures in the menu bar, a hover brief, and a detail window with trend tracks and recorded history. |
MCP server (utmwatch-mcp, inside the app) | Read-only tools over the recorded history, for AI agents. |
History is stored in ~/Library/Application Support/UTM Watch/history.sqlite.
The app bundle contains utmwatch-mcp, a read-only Model Context Protocol server over standard input/output. An agent on this Mac can use it to read the recorded history and work out why a VM was slow. Connect Claude Code with:
claude mcp add utm-watch -- /Applications/UTMWatch.app/Contents/MacOS/utmwatch-mcp
Then ask, for example: "A user says connecting to one of my VMs is sometimes slow. Use utm-watch to find out why."
| Tool | What it answers |
|---|---|
find_incidents | When were VMs slow? Start here when someone reports slowness without a time. |
summarize | What happened over a time range, VM by VM. |
get_moment | Everything recorded at one moment. |
get_metrics | One metric over time for a VM, the Mac or the network. |
list_events | VM starts and stops, memory pressure and swap, VMs at their CPU limit, Wi-Fi and link changes, sleep and wake. |
get_status | The latest sample: every VM, the Mac and the network now. |
list_macs | Every Mac in the fleet (on a Mac that has joined one). |
Access can be switched off in the app's Settings under AI diagnosis.
UTM Watch on one Mac needs nothing below. With several Macs, one of them hosts a hub and the others report to it; the hub Mac can then open Open Fleet from the menu bar item and see every Mac's VMs, and click a Mac for its history. The other Macs only report: they cannot see the fleet.
A Mac that joins uploads its last 24 hours, then new history every ten seconds. If the hub cannot be reached it keeps recording and fills the gap later. The hub Mac has to stay on and logged in.
Macs on other networks. On the hub Mac, under "Connect Macs on other networks", paste an auth key from your own Tailscale account (reusable, tagged, pre-approved). UTM Watch then carries its own hidden Tailscale node: nothing appears in the menu bar or in System Settings, and a Tailscale you already run is left alone. Pairing codes made after that work from any network.
A hub on a server. The same hub runs on Linux:
docker build -f Hub/Dockerfile -t utm-watch-hub . && docker run -d -p 127.0.0.1:8787:8787 -v hub-data:/data utm-watch-hub
docker exec utmwatch-hub token create --enroll --hub http://hub-address:8787 # a pairing code
Paste the code in each Mac's Settings › Fleet and click Join. Add --view to make a code whose Mac may also view the fleet.
AI diagnosis across the fleet. On a Mac that has joined, the MCP server offers list_macs, and every tool takes an optional mac (a name or UUID). Without mac a tool answers for the Mac it runs on, from its own database, exactly as before; that keeps working when the hub is down.
The design is in docs/DESIGN-fleet.md.
UTM Watch reads each VM's process for CPU and memory, its vmenetN interface for network, and its disk image for disk usage, all read-only and without anything installed in the guest. It matches processes to VMs through the disk image each process holds open, and gets names and states from UTM's AppleScript interface. Only NAT ("Shared") networking is supported in this version; bridged VMs show no network.
docs/HOW-IT-WORKS.md explains what each number means, how VMs are identified, the permissions involved and the implementation details.
Requires macOS 26 on Apple silicon and the Swift toolchain from Xcode or the Command Line Tools. The app has no third-party dependencies and needs no root.
Self-checks for the pure logic (Command Line Tools ship no XCTest, so this is a plain executable):
swift run selftest
Scripts/make-app.sh builds and signs build/UTMWatch.app (with your Apple Development certificate if you have one, otherwise ad hoc); Scripts/make-release.sh produces the downloadable archives in dist/. Design notes are in docs/DESIGN-menu-bar-app.md.
Scripts/make-app.sh
open build/UTMWatch.app
To connect Claude Code to a build from source:
claude mcp add utm-watch -- "$(pwd)/build/UTMWatch.app/Contents/MacOS/utmwatch-mcp"
Bug reports and pull requests are welcome. See CONTRIBUTING.md.
MIT. See LICENSE.
Built by DarrickBM
If UTM Watch is useful to you: