SolidWorks

sw-mcp

Let an AI agent (Claude, or any other MCP client) design parts, assemblies and drawings in your own SolidWorks, and check its own work as it goes. After every step it measures the result, so it can compare it with what you asked for and fix mistakes instead of guessing.

sw-mcp is a fork of SolidWorks-MCP by Henk Jan Baard and the SolidWorks connector of Jig. It works with any MCP client.

What it can do

• Parts: sketches, extrudes, revolves, sweeps and lofts; holes, threads, slots and pockets on any face; fillets, chamfers, shells, ribs, patterns and mirrors. Every sketch is fully defined, so the part stays editable.
• Checking: each step reports volume, mass and size; dimensions and mates are measured back. A step that can't be done fails with a clear reason instead of producing wrong geometry. read_model reads a whole part for a review in one call: holes with their sizes, internal radii, sharp inside corners, setups, thin walls and draft.
• Sheet metal: base flanges (flat tabs or bent L, U and Z sections) and edge flanges with your thickness, bend radius and K-factor; the flat blank's size, and the flat pattern with bend lines exported to DXF for laser cutting. Closed corners, ready to weld.
• Welds and weldments: weld beads between bodies, full or intermittent; frames of library tube, pipe, angle and channel profiles with mitred or butted corners, end caps and gussets; the cut list with each member's length and the total weld length.
• Assemblies: insert and place components, mate them, swap parts, check interference and step joints through their range of motion.
• Drawings: ISO sheets with a title block, views, sections and details, dimensions, hole callouts, surface finish and GD&T symbols, tables, and export to PDF, DXF or DWG. Sheet metal parts get their flat pattern with bend lines, bend notes and the blank's size; welded parts their weld symbols and cut list.
• Your own parts: open existing parts and STEP files, change dimensions and equations, set materials, and build on sketches you drew.
• 3D printing and export: STEP, STL and 3MF export, screenshots, printability checks, and comparing a part with a scanned mesh.

Get started

1. Install uv.
2. Start SolidWorks and leave it open.
3. Add the server to your MCP client. In Claude Code:

   claude mcp add solidworks -- uvx sw-mcp

Claude Desktop or another client

   {

"mcpServers": { "solidworks": { "command": "uvx", "args": ["sw-mcp"] } } }

With Jig there is nothing to add: the plugin starts sw-mcp itself.

1. Ask for a part:

Design a 100 × 80 × 8 mm mounting plate with a Ø16 mm centre bore, four

counterbored M5 holes 12 mm from the corners and R5 corners. Then export

an STL.

Or a sheet metal one:

Make a 2 mm steel tray, 80 × 50 mm, with 20 mm flanges on the long sides

and an inner bend radius of 3 mm. Give me the flat pattern as a DXF and a

drawing as a PDF.

Or a welded frame:

Weld a 600 × 400 mm frame of 30 × 30 × 2.6 square tube with mitred

corners, cap the open ends, and give me the cut list and a drawing.

Requirements

• Windows with SolidWorks installed and running. The server connects to the open SolidWorks; it doesn't start it.
• Tested on SOLIDWORKS 2026. 2020 and newer should work but are untested.
• To check your setup, run this with SolidWorks open. It builds a few small test parts and closes them without saving:

  uvx sw-mcp --selftest

Good to know

• Early version (0.x): it works end to end, but tool names may still change. See the changelog.
• Local: it talks only to the SolidWorks on your computer and makes no network calls.
• Scripts are on by default: run_script runs any Python it's given on your computer. Start the server with --no-scripts to turn it off.
• Multibody parts: face and edge tools only see the first body; read_model reads them all.

Help and feedback

Something not working? Open a bug report with the output of uvx sw-mcp --selftest. Running a SolidWorks version other than 2026? A compatibility report helps, whether it worked or not.

Credits and license

MIT, see LICENSE. The original server is by Henk Jan Baard (hjbaard/SolidWorks-MCP); this fork is maintained by Nejc Dvorsek.