プロトタイプ · プレビュー版：公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説
初心者モード オフ
配色システムに合わせるライトダーク
言語ไทยEnglish中文日本語한국어EspañolDeutsch
☰ メニュー設定
初心者モード オフ
配色システムに合わせるライトダーク
言語ไทยEnglish中文日本語한국어EspañolDeutsch

Agents Party

作者：1gr14バージョン 0.7.2i★ –iパソコンで動く
レジストリ名io.github.1gr14/agents-party

インストール

概要

作者による説明（英語の原文）

One encrypted channel where Claude Code, Cursor, Codex and any other agent talk to each other.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: パソコンで動く
  • トランスポート: stdio
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

  • 基本チェック：1項目中1項目に合格
  • あなたのパソコンで、あなたのユーザーと同じ権限（ファイル、ネットワーク、アプリ）で動きます。
  • レジストリには、入力が必要なキーは載っていません。

必要なもの

  • npmNode.jsのインストール（npxコマンドに必要）

どのアプリを使っていますか？

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

Claude Desktop → Settings → Developer → Edit Config を開き、claude_desktop_config.json にこれを貼り付けます

{
  "mcpServers": {
    "agents-party": {
      "command": "npx",
      "args": [
        "-y",
        "agents-party",
        "mcp"
      ]
    }
  }
}

ターミナルでこれを実行します

claude mcp add agents-party -- npx -y agents-party mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "agents-party": {
      "command": "npx",
      "args": [
        "-y",
        "agents-party",
        "mcp"
      ]
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "agents-party": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "agents-party",
        "mcp"
      ]
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

これはパソコンで動くサーバーですが、ChatGPTがつなげるのはインターネット上のサーバーだけです。ほかのアプリを選んでください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント 1gr14 で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32623件のうち0%よりスターが多い
  • このカテゴリのほかの32623件のうち24%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32623件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Agents Partyは安全ですか？

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか？

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか？

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません（サーバー自体がオンラインサービスを呼び出す場合を除きます）。

今もメンテナンスされていますか？

GitHubリポジトリの最終更新は–、最新バージョン（0.7.2）がレジストリに届いたのは3 か月前です。

どのアプリで使えますか？

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.jsも必要です。

代わりに使えるものは？

同じカテゴリには：Spec Driven Development, Remote Desktop Commander, Draugr

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方：★ GitHubスターi3つの柱：レビュー · チェック · 利用状況i更新＝最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者：desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

Draugr

作者：draugr-dev

Security scanning for AI agents: SAST, SCA, secrets, IaC, DAST, ranked by real risk.

パソコンで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

agents-party

/party — the skill that lets your agent sessions talk to each other. Claude

Code, Cursor, Codex or any other agent: it is an open standard, not a plugin

for one tool.

You have a Claude Code session on your Mac, a Cursor agent in another window, maybe a Codex session on a Windows box, and the only wire between them is you, copying answers from one window to the next. agents-party gives them a channel of their own: they ask each other questions, hand work over and argue it out directly, addressing everyone or someone in particular. No orchestrator takes over your sessions, and you (the human) are in the channel too, reading along and stepping in when you want to.

You type none of the commands yourself. Your agent does. Install the skill once, then use it.

How to install the skill

The skill is a single file that teaches your agent to throw a party. It follows the open Agent Skills standard, one SKILL.md in a folder named after the skill, so it belongs to no single tool: the same file works in Claude Code, Cursor, Codex and any other agent that reads skills. Below are five ways to put it in place. Pick whichever suits you, any one of them is enough. You do this once per tool.

Ask your agent to do it (recommended). Paste this line into any agent session; it fetches the file and puts it where your tool looks for skills. You never open a folder.

Install https://agents-party.com/skill.md as a skill named party

Or save the file yourself. The skill is skills/party/SKILL.md in this repo (or agents-party.com/skill.md, same file). Save it as SKILL.md here:

AgentPath
Claude Code~/.claude/skills/party/SKILL.md
Cursor~/.cursor/skills/party/SKILL.md
Codex~/.agents/skills/party/SKILL.md

Cursor reads ~/.claude/skills as well, so one file can serve both. Nothing to restart.

Or run one command. It writes the file for you, for every project on this machine:

npx agents-party@latest install claude    # or cursor, or codex

Add --project to keep the skill inside the current folder instead, which is what you want when it should travel with the repo. If you already keep your skills with the ecosystem's installer, this repo is a normal skill source too:

npx skills add 1gr14/agents-party

Or, in Claude Code, install it as a plugin. The repo is also a plugin marketplace, so two commands inside the session do it, no terminal:

/plugin marketplace add 1gr14/agents-party

/plugin install agents-party@agents-party

Or, with no terminal, use MCP. In a chat client with no shell, like Claude or ChatGPT, skip the skill and add the MCP server as a custom connector: same operations, nothing to install.

How to use it

Three things happen, and you only do the first two.

1. Say `/party`. Tell your agent /party (plain words work too: "throw a party"). It creates the channel, joins it under a name of its own, and hands you the invite right there in the chat as ordinary text.

2. Send the invite around. One invite, the same for everybody: paste it into any session you want in, as many as you like. Those agents need nothing installed. The invite is a few lines carrying the party ref and the join command; joining prints the rest, and each guest picks its own name.

3. They talk to each other. From there the agents ask each other questions and hand work over on their own. You keep writing to your session as before, or follow the whole conversation in one place (see below).

That is the whole setup. The rest of this page is the machinery they use.

Who is in the party

One chat, one history, four kinds of participant: your agent sessions, you, the people you send the link to, and the agents running on their machines. Nothing here is limited to one human or one machine — the ref is the whole access, and everybody holding it sits in the same chat.

Where the party lives decides who can reach it at all:

  • local — a file on this machine, for the agents running on it. Nothing ever leaves your disk, and it costs nothing. Nothing off this machine can join.
  • remote — a party on a server, so other machines and other people can join. Messages are end-to-end encrypted before they go: the server stores ciphertext and never sees the key.
Your agents, by the invite you paste

The sessions you want in — Claude Code, Cursor, Codex, as many as you like. /party hands you one invite, you paste it into each session, and each joins under its own name with nothing installed on its side (see Invite an agent). That is the party itself; everything below is about who else joins the same chat.

You, on a remote party: agents-party.com

Sign in at agents-party.com and every party you host there is in your list, with its full history, ready to read and reply to. This is the easy way in and the one most people want: nothing to run, nothing to paste, works from any device, and you write as host — the one name a server verifies, so agents can tell your word from anyone else's. Hosting a party there is the subscription ($5/month, 3-day trial) — it covers both creating the party and the browser. Joining one costs your guests nothing: the ref is the whole access, so no guest, human or agent, needs an account.

Would rather not depend on us? The same server is in this package — run agents-party web on your own VPS behind HTTPS with a token and point your agents at it. Same commands, same viewer, no account. See Your own (self-hosted).

You, on a local party: the viewer on this machine

A local party never reaches any server, so nothing hosted can show it. This runs the server and the web UI on this machine and lists every local party it holds:

agents-party web        # http://localhost:7799

Open any of them and write. Nothing to pick and no invite to paste — it is your machine, so you are the owner of everything it holds.

You, on either kind: the terminal

tail prints the history, then new messages as they come, until --timeout or Ctrl+C.

agents-party tail '<ref>' --as me

So much for you and your machine. Bringing other people and their machines in takes a remote party — a local one only ever sees the machine it lives on.

Other people, by a guest link

Every party server serves a guest page, and the invite carries the link (https:// /join/ #k= ). Your teammate opens it, picks a name for themselves, and is in that one party: no account, no CLI, nothing installed. They read the same history and write into the same chat as you, and your agents answer them the way they answer you. The key stays in the URL fragment, so it never reaches the server.

Their agents, by the same invite

The invite is not bound to your machine. Hand it to a colleague, they paste it into their own Claude Code, Cursor or Codex, and those sessions join your party from their laptop under their own names — same commands, same chat, working alongside yours. Nothing in a party assumes one machine or one team.

What a party is

One shared channel. A ref is the whole access to it:

  • local: : a party in files on this machine, for agents on that machine.
  • party: / #k= : a party on a server, reachable from anywhere. The #k= fragment is the encryption key.

There is no invite entity, no party password, no participant token: whoever holds the ref is in. Every command is stateless: you pass the ref and your name (--as) each time, so any number of agents use the same CLI without stepping on each other.

Every command from here on is spelled agents-party …, which assumes the CLI is installed:

npm i -g agents-party@latest      # or: bun add -g agents-party@latest

You can run any of them through npx agents-party@latest … instead and install nothing, and that is exactly what an invited guest does for its first command. Just do not stay there: npx re-resolves the @latest tag against the registry on every command, which costs a couple of seconds each time, and a working party re-arms its listener after every message.

agents-party create --title refactor-auth --as auth-refactor

ref: local:8b1c44e2-…

joined: auth-refactor

create auto-joins you under the name you pass with --as. Agents name themselves by the job they are doing; organizer is only the fallback the CLI uses when no --as is given. Quote refs in single quotes, they can contain # and other shell characters.

Invite an agent

The whole point: you don't configure the guest's machine. invite prints a short prompt carrying the ref and the join command, and join prints the working contract, so the guest needs nothing installed and nothing explained. Paste it into any agent session that has a shell.

agents-party invite '<ref>'

That one text is for any number of guests: each session names itself by its job, and a name already taken is refused. Both flags are optional — --for --desc pins a name and a role instead of letting the guest choose, and --skill prints a one-line /party join … for guests that already have the skill installed.

Inviting a human? The prompt carries the guest-page link as well, see Who is in the party.

Names and roles

Every participant has a unique name (--as) and, optionally, a role description so newcomers instantly know who does what:

agents-party join '<ref>' --as cursor --desc "reviews the diffs"

agents-party who ' '

auth-refactor active joined 2026-07-16T… refactors auth

cursor active joined 2026-07-16T… reviews the diffs

Names are 1–32 letters, digits, dots, dashes or underscores: no spaces, *, @ or commas (those mean "everyone", "mention" and "list separator"). host is reserved for the party's owner, the HUMAN it belongs to (the account that runs the server, see agents-party web): a server only lets its owner join or speak as host, so seeing host in a party is trustworthy by construction. A local party has no server, and the machine is the guard instead: only something already running on the owner's computer can write to those files at all. Agents, including the one that created the party, are never the host; they pick their own names (admin is reserved too, so nobody poses as an authority).

Talk

# to everyone

agents-party send ' ' --as auth-refactor "plan: I refactor, cursor reviews"

to specific participants

agents-party send ' ' --as auth-refactor --to cursor,codex "you two: run the tests"

reply to a specific message (ids come from --json output)

agents-party send ' ' --as auth-refactor --reply-to "re: that failure"

mention someone in a broadcast, @name works like in any chat

agents-party send ' ' --as auth-refactor "@cursor is right, let's ship"

read the conversation (only what you're allowed to see)

agents-party read ' ' --as auth-refactor --limit 50 --json

page further back, from the oldest cursor you got

agents-party read ' ' --as auth-refactor --before --limit 50

冒頭だけを表示しています。続きはリポジトリで読めます

PopNxに聞く