プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

StatCite — Verified Economic Statistics

作者:asokoreバージョン 1.17.0i★ –iクラウドで動く
レジストリ名io.github.asokore/statcite

インストール

概要

作者による説明(英語の原文)

Cited economic statistics: World Bank, IMF, BIS, ECB, Caribbean central banks. Verify any figure.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

  • 基本チェック:1項目中1項目に合格
  • 作者のサーバーで動きます。あなたが頼んだ内容は、作者のサーバーを通ります。
  • レジストリには、入力が必要なキーは載っていません。

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://statcite.com/mcp

ターミナルでこれを実行します

claude mcp add --transport http statcite https://statcite.com/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "statcite": {
      "url": "https://statcite.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "statcite": {
      "type": "http",
      "url": "https://statcite.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://statcite.com/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

このサーバーのツール一覧はまだ読み取っていません。エンドポイントは順番にチェックしています。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント asokore で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    エンドポイントが応答する

    まだチェックしていません。エンドポイントは順番にチェックしています

  • … 未チェック

    OAuthでサインイン

    まだチェックしていません。エンドポイントは順番にチェックしています

  • … 未チェック

    ツールの説明に隠れた指示がない

    まだチェックしていません。エンドポイントをチェックするときにツール一覧を読み取ります

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32489件のうち0%よりスターが多い
  • このカテゴリのほかの32489件のうち73%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32489件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

StatCite — Verified Economic Statisticsは安全ですか?

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.17.0)がレジストリに届いたのは14 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Whisper

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

Whisper

作者:whisper-sec

One routable IPv6 per AI agent, verifiable from the DNS root. Keyless tools need no signup.

パソコンでもクラウドでも今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

StatCite

Economic statistics your AI can actually cite, with a verifier that catches the ones it invents.

· Live status · AI accuracy benchmark · Licence ledger · Verification guide

*Every figure, verdict and citation above is real output from a live call, captured by tools/make-demo-gif.py at build time. A model recalling 98% is not a strawman: it was roughly right a few years earlier, which is exactly how stale recall sounds.*

Free remote MCP server + REST API serving official economic statistics from the World Bank, IMF WEO and Fiscal Monitor (current vintage via the IMF DataMapper API, with a DBnomics fallback), BIS policy rates, ECB reference rates, and two regional central banks (the Eastern Caribbean Central Bank and the Central Bank of Barbados, covering Anguilla and Montserrat, which the World Bank does not report), where every number ships with its full citation: source, dataset, series ID, canonical URL, licence, retrieval date, a ready-to-paste citation sentence, and BibTeX/APA export formats.

The differentiator is verification, not lookup: verify_stat checks a claimed figure against the official series and returns match / close / mismatch / cannot_verify with diagnostics for the classic errors (wrong year, percent-vs-decimal, millions-vs-billions, sign flips). On a mismatch it re-judges the claim against the previous IMF vintage, so "was right when written, since revised" is never confused with "wrong". When the source cannot support a verdict, it says cannot_verify with the reason. It never guesses.

Three things people use it for

  1. Fact-check a draft. The fact_check MCP prompt + verify_claims audit every macro figure in a document, in batches of 15, each verdict carrying the citation for the correct number.
  2. Cited data for agent reports. get_indicator and country_snapshot return official series with paste-ready citations, honest projection labelling, and machine-readable "no published value exists" instead of silent gaps.
  3. Resolve source disagreements. compare_sources fetches one indicator from every official source in its chain and shows the spread (e.g. general-vs-central government debt definitions), each value with its own citation.

Install in one line

ClientHow
Claude (web/desktop)Open StatCite in Claude's connector directory and click Connect. Fallback: Settings → Connectors → Add custom connector → https://statcite.com/mcp
Claude Code/plugin marketplace add asokore/statcite then /plugin install statcite@statcite (also installs the verify-then-cite skill), or just the server: claude mcp add --transport http statcite https://statcite.com/mcp
CursorInstall in Cursor · or {"mcpServers":{"statcite":{"url":"https://statcite.com/mcp"}}}
VS CodeInstall in VS Code · Insiders · or code --add-mcp '{"name":"statcite","type":"http","url":"https://statcite.com/mcp"}'
ChatGPTDeveloper mode → add MCP server, No Authentication (implements the deep-research search/fetch pair)
Cline / stdio-onlynpx -y mcp-remote@0.14.3 https://statcite.com/mcp (pinned, so a client restart never pulls a new release. See llms-install.md)

No signup, no API key, no OAuth.

Side effects

StatCite is a remote server. Over HTTP, calling it installs nothing and runs nothing on your machine. This is what each kind of call does, and where.

OperationCalls out from StatCite's serverWrites on your machineWrites anywhere elseRecorded by StatCite
get_indicator, get_series, compare_sources, country_snapshot, inflation_adjust, fx_convert, fetchYes, to the official source APIs named in the citation (World Bank, IMF, ECB, BIS and DBnomics, with exchange rates through Frankfurter, a relay of ECB reference rates), plus the published CaribStat corpus of ECCB and Central Bank of Barbados series at asokore.github.io/caribstatNoNoOne aggregate usage row
verify_stat, verify_claimsYes, the same source APIs, to fetch the official figureNoNoOne aggregate usage row, with the verdict kind
search_indicatorsOnly to DBnomics, and only when fewer than five results were found locallyNoNoOne aggregate usage row
searchNoNoNoOne aggregate usage row
list_sourcesNoNoNoOne aggregate usage row
Connecting a client over HTTPNoOnly the server entry your client saves in its own configNoNothing
The stdio bridge (mcp-remote)Nonpx downloads mcp-remote into the npm cache and runs it locally, and mcp-remote creates its own config folder (~/.mcp-auth unless MCP_REMOTE_CONFIG_DIR is set)NoNothing

The usage row holds the transport, the tool name, the registry indicator key, the ISO3 country code, the verify verdict kind, the outcome and the duration. Every one of those comes from a closed list, so nothing you type is stored. No IP address, user agent, header, session id, query text or claimed value is recorded. The code is server/src/core/analytics.ts and the policy is at statcite.com/privacy.

Every get_indicator and get_series result also carries a limitations list: codes for what the figure is not, such as a projection, a fallback source's figure, a modelled estimate, a value rounded by the source or a number StatCite computed. A latest value more than 3 years older than the year it was retrieved carries stale_latest. When the primary source served it and the registry lists other sources, it also carries stale_primary, which names the sources StatCite did not query. An IMF value before the projection boundary StatCite infers carries outturn_unconfirmed, because the IMF data StatCite reads does not mark which years are outturns. Each code is read from a structured field of the result or from the indicator registry, and an empty list means none of those conditions was detected.

Make your agent use it without being asked

Connecting a server puts the tools on the shelf. It does not make an agent reach for them, and an agent that is confident about a number will usually answer from memory. One standing rule fixes that. Paste this into CLAUDE.md or AGENTS.md, into Cursor Settings → Rules, or into your ChatGPT project instructions:

Before stating any country-level economic figure, get it from StatCite (get_indicator) or check it (verify_stat), even if you think you know it, and include the citation_text it returns.

Try it in 5 seconds

curl "https://statcite.com/v1/verify?indicator=inflation_cpi&country=USA&period=2023&value=4.1"

curl "https://statcite.com/v1/indicator/govt_debt_gdp?country=JPN&latest_only=true" curl "https://statcite.com/v1/fx?amount=100&from=USD&to=BBD" curl -X POST "https://statcite.com/v1/verify_claims" -H "content-type: application/json" \ -d '{"claims":[{"indicator":"inflation_cpi","country":"USA","period":"2023","claimed_value":4.1}]}'

Tools

get_indicator · verify_stat · verify_claims · compare_sources · get_series · search_indicators · country_snapshot · inflation_adjust · fx_convert · list_sources · search · fetch, plus 3 MCP prompts (fact_check, country_brief, cite_this_stat) and 3 resources (registry, licence ledger, SIDS list). 42 active curated indicators, 200+ economies, ~120 currencies. All read-only. Details: docs, and the verification guide for the method.

Repo layout

server/        Cloudflare Worker: MCP endpoint + REST API + tests (zero runtime deps)

site/ statcite.com static site (landing, docs, llms.txt, OpenAPI, legal) apify/ Metered twin: Apify actor (pay-per-event) bundling the same core skill/ Claude skill teaching agents the verify-then-cite workflow distribution/ Registry manifests, submission steps, launch copy bench/ pre-registered AI-accuracy benchmark: COVENANT.md, METHODOLOGY.md, question bank, frozen snapshots, runs/ (R1 REPORT + ADDENDA) docs/ Research report, strategy, launch plan, monetization roadmap BRIEF.md Context + mandate for anyone (human or agent) picking this up HANDOFF.md Deployment runbook (the mechanical steps to take it live) CLAUDE.md Working guide: commands, architecture, invariants

Develop

cd server

npm install npm test # fixture-backed, no network npm run smoke # live end-to-end against real upstream APIs npm run dev # wrangler dev (local Workers runtime + static site) npm run deploy # wrangler deploy

Data & licensing

StatCite does not originate the underlying statistical observations. Derived values and verification verdicts are calculated transparently from cited source data with the method disclosed. World Bank (CC BY 4.0); IMF (published IMF statistical data may be copied, redistributed and used in derivative works with attribution as "Source: International Monetary Fund, \ , \ ", plus data-integrity, downstream-communication and free-of-charge-disclosure conditions, all carried verbatim in every citation's license field); BIS (reproduction and redistribution with attribution); ECB (attribution; reference rates informational); Eurostat via DBnomics (CC BY 4.0); FRED is not served. Its Services Terms of Use (clauses (p) and (q), https://fred.stlouisfed.org/legal/) reserve FRED content from AI/ML use and from caching or redistribution. IMF WEO/Fiscal Monitor projections are labeled as projections. The primary IMF path is the DataMapper API (current edition, verbatim edition label). If unavailable, StatCite falls back to the newest edition DBnomics has ingested, which can lag the IMF's release calendar, so responses cite the resolved vintage, flag stale ones, and every fallback is disclosed (verify_stat/verify_claims return cannot_verify with the fallback value as indicative when the primary failed transiently, rather than judging against a substitute that may differ by definition or vintage. A series the primary permanently lacks is judged against its stable fallback source with disclosure). Server code: MIT.

Built and curated by a professional economist. Contact: hello@statcite.com

PopNxに聞く