プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Sizeverdict

作者:CloudCorpRecordsバージョン 0.1.0i★ –iパソコンで動く
レジストリ名io.github.CloudCorpRecords/sizeverdict

インストール

概要

作者による説明(英語の原文)

Weigh a dependency's bundle cost from supplied module sizes, with shipped overlap netted.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: パソコンで動く
  • トランスポート: stdio
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

  • 基本チェック:1項目中1項目に合格
  • あなたのパソコンで、あなたのユーザーと同じ権限(ファイル、ネットワーク、アプリ)で動きます。
  • レジストリには、入力が必要なキーは載っていません。

必要なもの

  • npmNode.jsのインストール(npxコマンドに必要)

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

Claude Desktop → Settings → Developer → Edit Config を開き、claude_desktop_config.json にこれを貼り付けます

{
  "mcpServers": {
    "sizeverdict": {
      "command": "npx",
      "args": [
        "-y",
        "@reneturcios/sizeverdict",
        "mcp"
      ]
    }
  }
}

ターミナルでこれを実行します

claude mcp add sizeverdict -- npx -y @reneturcios/sizeverdict mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "sizeverdict": {
      "command": "npx",
      "args": [
        "-y",
        "@reneturcios/sizeverdict",
        "mcp"
      ]
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "sizeverdict": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@reneturcios/sizeverdict",
        "mcp"
      ]
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

これはパソコンで動くサーバーですが、ChatGPTがつなげるのはインターネット上のサーバーだけです。ほかのアプリを選んでください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント CloudCorpRecords で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32466件のうち0%よりスターが多い
  • このカテゴリのほかの32466件のうち90%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32466件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Sizeverdictは安全ですか?

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.1.0)がレジストリに届いたのは3 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.js, Dockerも必要です。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, HotCodePush

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

HotCodePush

作者:hotcodepush-team

Manage over-the-air (OTA) updates for React Native, Expo, Capacitor and Cordova apps.

クラウドで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

sizeverdict

Adding a dependency is easy to agree to and hard to price. The headline size in a package listing is not what you actually pay: part of the new code may already be in your bundle, shipped by dependencies you already depend on. sizeverdict works out the real price from numbers you already have. You supply the candidate's modules with a path and a byte size for each one, the same facts for any dependencies you already ship, and optionally a budget for net new bytes. sizeverdict hands back the candidate's total bytes, the bytes that are already shipped, the net new cost, an overlap list, and a verdict band. It never downloads, installs, or measures a package; it computes from the supplied facts only.

A candidate module counts as overlapping when its exact path appears in at least one installed dependency's module list. Shared bytes are summed at the candidate's sizes, and each overlapping module is counted once, even when two installed dependencies carry the same path — the installed dependencies' own sizes for that path are never used. The overlap list holds one entry per overlapping module, sorted by path, each with the candidate's size and the distinct names of the installed dependencies carrying that path, sorted ascending. Net new bytes are candidate bytes minus shared bytes.

The verdict is read off the net new cost. Zero net new bytes is free_overlap. Up to 10240 bytes is negligible, up to 102400 is small, up to 512000 is moderate, and anything above that is large. Each threshold is inclusive at the top of its band: 10240 is still negligible, 10241 is small, and so on. When you supply budget_bytes, the result also reports whether the net new cost is over it; landing exactly on the budget is not over.

Malformed input — a missing candidate, a missing, empty, or non-string name, a missing or empty module list, a module with a missing or empty path or a negative or fractional byte size, the same faults inside an installed dependency, or a bad budget — is a validation error naming the offending path, with no partial result. Two modules with the same path inside one package, two installed dependencies with the same name, and a candidate whose name matches an installed dependency (candidate already installed: X) are also errors. Unknown extra fields are ignored.

CLI

npx @reneturcios/sizeverdict assess --input args.json

npx @reneturcios/sizeverdict --version

args.json contains the full arguments object:

{

"candidate": { "name": "left-pad-plus", "modules": [ { "path": "index.js", "bytes": 4000 }, { "path": "lib/util.js", "bytes": 9000 }, { "path": "lib/extra.js", "bytes": 2000 } ] }, "installed": [ { "name": "utils-kit", "modules": [ { "path": "lib/util.js", "bytes": 8500 } ] } ], "budget_bytes": 10000 }

The assessment is printed as JSON:

{

"candidate": "left-pad-plus", "candidate_bytes": 15000, "shared_bytes": 9000, "net_new_bytes": 6000, "overlap": [ { "path": "lib/util.js", "bytes": 9000, "also_in": ["utils-kit"] } ], "verdict": "negligible", "budget": { "budget_bytes": 10000, "net_new_bytes": 6000, "over_budget": false } }

Note the shared module contributes the candidate's 9000 bytes, not the installed copy's 8500. Exit codes: 0 on success, 1 on a runtime error (including an unreadable or invalid input file, or invalid input), 2 on a usage error.

MCP server

npx -y @reneturcios/sizeverdict mcp

MCP client config:

{

"mcpServers": { "sizeverdict": { "command": "npx", "args": ["-y", "@reneturcios/sizeverdict", "mcp"] } } }

Tools
  • assess_bundle_cost — Weigh a candidate dependency's real bundle cost from caller-supplied module sizes: total bytes, the modules already shipped via installed deps (shared bytes), the net new cost, and a verdict band.
  • candidate (object, required) — the dependency being weighed:
  • name (string, required, non-empty) — candidate package name
  • modules (array, required, at least 1 item) — the candidate's shipped modules; each item:
  • path (string, required, non-empty) — module path inside the package
  • bytes (integer, required, at least 0) — module size in bytes
  • installed (array, optional) — dependencies already shipped, same shape as the candidate; each item has a name and a modules list in the same form. Absent means none are shipped.
  • budget_bytes (integer, optional, at least 0) — net-new-bytes budget to check against

Returns {candidate, candidate_bytes, shared_bytes, net_new_bytes, overlap, verdict, budget}, where candidate echoes the candidate's name, overlap holds one {path, bytes, also_in} per overlapping candidate module sorted by path, verdict is one of free_overlap, negligible, small, moderate, or large, and budget is {budget_bytes, net_new_bytes, over_budget} or null when no budget was supplied.

Docker

docker run -i ghcr.io/cloudcorprecords/sizeverdict

docker run --rm -v "$PWD:/w" ghcr.io/cloudcorprecords/sizeverdict assess --input /w/args.json

Development

npm install

npm run build # tsc -> dist/ npm test # tsx --test test/*.test.ts (pure local, no network) npm run dev # run the CLI from source

License

MIT — Copyright (c) 2026 Rene Turcios

PopNxに聞く