プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Guest Logic

作者:guestlogic.aiバージョン 1.1.0i★ –iクラウドで動く
レジストリ名ai.guestlogic/guest-logic

インストール

概要

作者による説明(英語の原文)

Guest Logic is hotel, venue and bar software your AI assistant can set up for you.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://guestlogic.ai/mcp

ターミナルでこれを実行します

claude mcp add --transport http guest-logic https://guestlogic.ai/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "guest-logic": {
      "url": "https://guestlogic.ai/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "guest-logic": {
      "type": "http",
      "url": "https://guestlogic.ai/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://guestlogic.ai/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • start_signup

    Creates the company in Guest Logic (a hotel in free test mode) and e-mails the owner one approval link. Use only when the owner has no Guest Logic account. The reply names everything still missing and the tool that fills each. No sign-in needed.

  • my_hotel

    The hotel's details: name, address, phone, rooms, check-in and check-out, taxes, and whether it is in test mode. Needs the owner's sign-in.

  • setup_status

    Every fact this company needs, each Done, Missing, Needs us or Optional, with the tool that fills each missing one. Needs the owner's sign-in.

  • set_company

    The legal name, mailing address, billing e-mail, website and time zone. Send only what you have. Needs the owner's sign-in.

  • set_venue

    The event spaces and how many each holds, shown on quotes and the inquiry form. Replaces the list. Needs the owner's sign-in.

  • set_hiring

    The positions hired for (shown on the company's careers page), the hiring e-mail and the hiring phone. Needs the owner's sign-in.

  • set_team

    E-mails a sign-in to each team member, up to 25 a call. Reports the result per person. Needs the owner's sign-in.

  • upload_file

    For a PDF, picture or spreadsheet (up to 25 MB). Call with filename, content_type and size: you get an address to PUT the file to. After the PUT, call again with document_id: Guest Logic reads it and returns what was found. Types: PDF, PNG, JPEG, WebP, XLSX, XLS, CSV, TXT. Needs

  • request_go_live

    Files the request to go live once the legal name, address, billing e-mail and the owner's accepted agreement are in; otherwise names what is missing. The Guest Logic team presses the last button. Needs the owner's sign-in.

  • upload_report

    Sends one report's content as text (CSV, tab-separated or plain text, up to 4 MB) — read a PDF or spreadsheet first and send its rows. Guest Logic reads it and sets up what it can (rooms, room types, rates, taxes, stays). Returns what was found. Needs the owner's sign-in.

  • submit_facts

    Rooms and stays you already extracted, as rows. Guest Logic applies them by the same rules as an uploaded report. Needs the owner's sign-in.

  • confirm_facts

    Confirms or changes one setup step. step and values: hotel {name, phone, email} · taxes {state, tourism, other} as percentages · checkin {check_in, check_out} as HH:MM · policies {cancellation, deposit, noshow, pets, smoking} · room_types {CODE: {name, sleeps}} · rates {CODE: nig

  • load_stays

    Loads the stays read from the reports into the hotel. First call without confirm to see the rows that need a decision; show them to the owner; then call with confirm true. Needs the owner's sign-in.

  • add_photo

    Adds a picture from a public web address (PNG, JPEG or WebP, up to 10 MB) to the booking page: the hotel, or one room type. 40 a day while testing. Needs the owner's sign-in.

  • set_logo

    Sets the company's logo from a public web address (PNG, JPEG or WebP, up to 10 MB). Needs the owner's sign-in.

  • drop_link

    The owner's links to drop files you cannot send as text (a scanned PDF) and to manage photos. Needs the owner's sign-in.

  • ask_us

    Asks the Guest Logic team to connect card payments, Expedia and Booking.com, or to finish the whole setup by hand. Connected within 24 hours. Needs the owner's sign-in.

  • invite_staff

    E-mails a sign-in to an employee or a manager. Needs the owner's sign-in.

  • stays

    Stays touching a date range (up to 31 days): confirmation, guest, dates, room, type, status, rate, source. Up to 200 rows a call; use page for more. Needs the owner's sign-in.

  • stay

    One stay by its confirmation number. Needs the owner's sign-in.

  • availability

    Rooms free each night by room type for a date range (up to 31 days). Needs the owner's sign-in.

  • house_inventory

    For one day: arrivals, departures, in house, rooms by housekeeping status, rooms out of order. Needs the owner's sign-in.

  • list_automations

    The company's automations: what each sends, when, and whether it is on. Needs the owner's sign-in.

  • automation_status

    The last runs of the company's automations: when, result, error. Needs the owner's sign-in.

  • tasks_waiting_on_me

    Open tasks on the signed-in person's Home board. Needs the owner's sign-in.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ! 注意

    作者とリポジトリが一致

    レジストリにソースのリポジトリが載っていないため、公開者(guestlogic.ai)とコードを照合できません

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    622ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    25件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32602件のうち0%よりスターが多い
  • このカテゴリのほかの32602件のうち95%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32602件のうち37%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Guest Logicは安全ですか?

当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.1.0)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Rystic

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

Rystic

作者:Rystic-Inc

Start, seed, clock, inspect and diff Rystic API simulators from your agent.

パソコンで動く今日更新
インストール

作者のREADME

リポジトリにREADMEが見つかりません

PopNxに聞く