プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Hanko exit_liquidity

作者:IamHarrie-Labsバージョン 2.0.1i★ –iクラウドで動く
レジストリ名io.github.IamHarrie-Labs/hanko

インストール

概要

作者による説明(英語の原文)

Can this position be closed, and what does it cost? Executable quote first, model beside it

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://tryhanko.xyz/api/mcp

ターミナルでこれを実行します

claude mcp add --transport http hanko https://tryhanko.xyz/api/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "hanko": {
      "url": "https://tryhanko.xyz/api/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "hanko": {
      "type": "http",
      "url": "https://tryhanko.xyz/api/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://tryhanko.xyz/api/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • exit_liquidity

    What it costs to exit a position at a given size, and the largest size that clears a slippage ceiling. Uses an executable venue quote when one exists (basis: quoted) and a constant-product model otherwise (basis: modelled), shows the gap between the two, and returns null rather t

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント IamHarrie-Labs で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    356ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    1件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの18613件のうち0%よりスターが多い
  • このカテゴリのほかの18613件のうち92%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの18613件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Hanko exit_liquidityは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(2.0.1)がレジストリに届いたのは3 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, DECIDE: Migration Discovery Risk Review

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者:formulahendry初期↓ 66/週★ 44014 か月前更新

パソコンで動く

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者:desktop-commander成長中★ 2113 日前更新

クラウドで動く✓ desktopcommander.app

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

hanko

Hanko turns crypto market chatter into a sized position, or an honest refusal, with the evidence attached, and can prove that same decision byte for byte, years later.

Point it at a token and the voices you trust, on X, Telegram or Bluesky. It reads what each one actually said, checks whether they're independent voices or one thesis repeated three times, and decides:

ENTER TOKENA  size 3.28%  confidence 0.66
  • independent_voices: 2 independent voice(s): voice_alpha, voice_gamma ~ echo voice_beta: marked as a repost or quote by the source ! wrong if price_usd < 1.0625 at any point within 72.0h (thesis fails if price falls 15% from entry) review at 2026-08-30T12:00:00Z

Sample output: real engine, synthetic inputs. voice_alpha/voice_beta/voice_gamma and TOKENA are fictional test fixtures. None of them is a real account or token.

Run that same input again in a year and it produces the identical decision id, because nothing about deciding touches the network, a clock, or a model. It only ever reads what was actually stored. That is the whole project: "prove it" is a command you can run.

Judging? Start at [/judges](https://tryhanko.xyz/judges): every line of the published rubric, mapped to a page or command you can check yourself. [tryhanko.xyz](https://tryhanko.xyz) has the pitch and a sample receipt (synthetic inputs, labelled). [/try](https://tryhanko.xyz/try) runs a piece of it, live, from your browser, no install. Full technical detail is at /docs.


RYO-CHAN Hackathon 2026 submission, three tracks. Track 1 (Autonomous Agents) is the agent above, built to the Multi-KOL Narrative Agent spotlight. Track 3 (New Skills) is exit_liquidity: what it costs to get *out* of a position, from an executable venue quote where one exists, in RYO's own response envelope. It is also the size gate the agent runs before committing. Track 2 (Dashboards & Interfaces) is three screens: the workbench, the failure drill and the Echo Index.

What it has shown, live
  • A ledger that grows every three hours, with no key. A scheduled workflow reads public Telegram, Bluesky and news voices on BTC, ETH, SOL and BONK, decides, seals the run with its replay bundle, stamps it on OpenTimestamps and commits it to live/. Every decision is graded 72 hours later against the conditions it wrote down first. /ledger shows what changed since the last run, most important first (D-20).
  • Graded against its own conditions, including when it was wrong. The first 32 scheduled decisions came due on 2026-10-27 and 28: every ENTER held (7 of 7, realised returns between -0.9% and +1.1%), and 7 of 25 refusals were proved wrong because a voice they said would flip them arrived. Those reviews also exposed two grading bugs, fixed in D-21.
  • A sealed live ENTER that anyone can re-derive. BTC, 2026-10-23, runs/run_836b976720f63dc0.json. The manifest lists every watchlist entry, including the PASS and both ABSTAINs. It is anchored in Bitcoin block 972,817, mined 35 minutes after the seal, and hanko verify-run replays all four decisions from the committed bundle with no network and no key. (Until 2026-10-24 that bundle was not actually in the repository; D-19.)
  • A measured exit cost. BONK, $50,000: the Jupiter quote says 2.3%. The skill's own constant-product model said 7.2%, and the report prints the 3.1x gap.
  • A study that audited the agent. The Echo Index ran Hanko's echo check over 2,094 real posts from 15 crypto channels. Echo inflation was 1.005x, published as found. First, though, it found that Hanko's own detector missed verbatim copies padded with an ad or a footer (D-14, fixed).
  • Nine failures injected on purpose. RYO down, every source down, a rate-limited quote venue, the model down, a prompt injection the model actually obeyed, tampered evidence, an edited sealed run, a source dying mid-sweep, a restart. All nine hold, computed live on /drill. The restart scenario broke the first time it ran (D-18, fixed).

A 判子 is the seal a person stamps on a document to commit to it. The mark goes on before the outcome is known and can't be taken back, which is exactly what this agent does with every decision it makes: sizes it, commits to it, and states in advance what would prove it wrong.

Submission

  • [Project Submission Form](RYOCHAN-Project-Submission-Form.pdf) (PDF, this repo)
  • [Demo video](https://youtu.be/fm0B4hZQCwQ)
  • [Announcement post on X](https://x.com/IamHarrie/status/2096908693967179844?s=20)

Contents

  • Verify it yourself in 60 seconds
  • Who this is for
  • Explore without running anything
  • The one rule
  • Layout
  • Why it is built this way
  • Use
  • Status
  • exit_liquidity, the new Track 3 skill
  • Decision records
  • The review loop
  • The sweep
  • Architecture, decisions, limitations

Verify it yourself in 60 seconds

No live credential, no account, no network. Every number below regenerates from synthetic fixtures committed in this repository (fictional sample voices and a fictional token, written for testing):

git clone https://github.com/IamHarrie-Labs/hanko && cd hanko

pip install -e ".[dev]"

pytest # 349 tests, offline, ~20s

make a decision, then prove it replays from stored bytes

hanko decide x --token TOKENA --subject voice_alpha --subject voice_beta \ --subject voice_gamma --market fixtures/market_tokena.json \ --as-of 2026-08-27T12:00:00Z --fixture fixtures/x_three_voices.json hanko audit # re-derives it, insists it reproduces

the Track 3 skill, against the same fixture, no network

hanko exit-liquidity TOKENA --size 50000 --market fixtures/market_tokena.json

the first live ENTER, re-derived from its committed bundle

hanko verify-run runs/run_836b976720f63dc0.json

break it on purpose: nine failure scenarios, offline

python -c "from hanko.drill import run; print([r['held'] for r in run()])"

re-derive every number in the Echo Index

hanko echo-index publish

Who this is for

Builders and traders who want an agent's reasoning to be auditable rather than taken on faith. Someone who has been burned by a bot that says "strong buy signal" with nothing behind it, and wants to see the evidence, the falsifiers, and the honest gaps instead. Also the judges reviewing this submission, who can replay any decision from the exact stored bytes it saw.

Not built for anyone who wants the agent to execute trades. It doesn't, and by the hackathon's own rules, none of the RYO tools it's built on can either. Everything here researches and sizes a position; nothing here moves funds.

Explore without running anything

OpenWhat it shows
tryhanko.xyzThe pitch, and a sample decision receipt (real engine, synthetic fixture inputs, labelled as such)
/tryexit_liquidity live: RYO facts, DexScreener depth, a Jupiter quote, in RYO's envelope
/judgesEvery rubric line, mapped to where to check it
/workbenchRemove a voice or tighten a threshold on the sample decision (synthetic inputs, labelled as such) and watch the actual decide() verdict move, and which rule caused it
/drillNine real failures injected into the real code, each defence computed live
/echoThe Echo Index: how much crypto consensus is one voice repeated, on 2,094 real posts
/docs#track1-liveTwo real decisions, live X evidence and live RYO facts, neither cherry-picked
/docs#mcp-transportWhat a live MCP handshake and a live x_search call actually return

/try , live against the real platform /docs , the full technical writeup

The one rule

fetch()  touches the network, is allowed to fail, and is never deterministic

parse() touches nothing, and is a pure function of its payload

The agent only ever sees the output of parse(). Because parse() is pure and payloads are content-addressed, any past decision can be re-derived from stored bytes and must reach the same verdict. Put a network call inside parse() and the reasoning trail stops being reproducible, and that property is what the whole submission rests on.

Layout

hanko/provenance.py      canonical JSON, sha256 addressing, Status, Coverage

hanko/evidence.py Evidence + Provenance: the source-agnostic unit hanko/sources/base.py the adapter contract hanko/sources/xsearch.py X, via the xAI Responses API and its x_search tool hanko/sources/rss.py RSS/Atom: free, and the only source with trustworthy timestamps hanko/sources/fixture.py local JSON: free development, and every failure mode in CI hanko/snapshot/store.py append-only content-addressed store, replay, integrity hanko/ryotools/ the six RYO tools over MCP and REST; structural fact extraction hanko/skills/exit_liquidity/ Track 3: what it costs to exit a position hanko/review/outcome.py grading a decision against its own commitment hanko/review/reliability.py calibration, per-voice and per-rule track records hanko/review/ledger.py append-only reviews, one per decision hanko/cli.py collect / decide / review / scorecard / audit / verify

Full tree:

hanko/

sources/ X, RSS, fixtures -- fetch() impure, parse() pure snapshot/ append-only content-addressed store ryotools/ the six RYO tools, MCP + REST decision/ evidence quality, verdicts, falsifiers, the ledger review/ falsifier checking, calibration, reliability skills/exit_liquidity/ Track 3: exit cost, capacity, drift, turnover sweep.py, cli.py, config.py, provenance.py, evidence.py site/ static landing page, /docs, /try -- the live web demo api/exit_liquidity.py the /try endpoint, real assess() call, no fixture tests/ 349 tests, one file per hanko/ package fixtures/ evidence and market fixtures used offline and in CI .github/workflows/ci.yml pytest on every push,

冒頭だけを表示しています。続きはリポジトリで読めます

PopNxに聞く