Spec Driven Development
MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.
作者による説明(英語の原文)
Find parishes and registers on Matricula, the church-book portal; open any page in its viewer.
この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。
このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。
使っているAIアプリを選んで、設定をコピーしてください。
MATRICULA_CACHE_DIR, MATRICULA_TIMEOUT, MATRICULA_MIN_INTERVAL, MATRICULA_SEARCH_INTERVAL, MATRICULA_CONTACT, MATRICULA_DOWNLOAD_DIR, MATRICULA_IMAGE_ACCESS必要なもの
どのアプリを使っていますか?
上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。
Claude Desktop → Settings → Developer → Edit Config を開き、claude_desktop_config.json にこれを貼り付けます
{
"mcpServers": {
"matricula": {
"command": "uvx",
"args": [
"matricula-mcp"
],
"env": {
"MATRICULA_CACHE_DIR": "your-value",
"MATRICULA_TIMEOUT": "your-value",
"MATRICULA_MIN_INTERVAL": "your-value",
"MATRICULA_SEARCH_INTERVAL": "your-value",
"MATRICULA_CONTACT": "your-value",
"MATRICULA_DOWNLOAD_DIR": "your-value",
"MATRICULA_IMAGE_ACCESS": "your-value"
}
}
}
}ターミナルでこれを実行します
claude mcp add matricula --env MATRICULA_CACHE_DIR=your-value --env MATRICULA_TIMEOUT=your-value --env MATRICULA_MIN_INTERVAL=your-value --env MATRICULA_SEARCH_INTERVAL=your-value --env MATRICULA_CONTACT=your-value --env MATRICULA_DOWNLOAD_DIR=your-value --env MATRICULA_IMAGE_ACCESS=your-value -- uvx matricula-mcp動かす前に、空欄の値を入力してください。
プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます
{
"mcpServers": {
"matricula": {
"command": "uvx",
"args": [
"matricula-mcp"
],
"env": {
"MATRICULA_CACHE_DIR": "your-value",
"MATRICULA_TIMEOUT": "your-value",
"MATRICULA_MIN_INTERVAL": "your-value",
"MATRICULA_SEARCH_INTERVAL": "your-value",
"MATRICULA_CONTACT": "your-value",
"MATRICULA_DOWNLOAD_DIR": "your-value",
"MATRICULA_IMAGE_ACCESS": "your-value"
}
}
}
}ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。
プロジェクトの .vscode/mcp.json に貼り付けます
{
"servers": {
"matricula": {
"type": "stdio",
"command": "uvx",
"args": [
"matricula-mcp"
],
"env": {
"MATRICULA_CACHE_DIR": "your-value",
"MATRICULA_TIMEOUT": "your-value",
"MATRICULA_MIN_INTERVAL": "your-value",
"MATRICULA_SEARCH_INTERVAL": "your-value",
"MATRICULA_CONTACT": "your-value",
"MATRICULA_DOWNLOAD_DIR": "your-value",
"MATRICULA_IMAGE_ACCESS": "your-value"
}
}
}
}ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。
これはパソコンで動くサーバーですが、ChatGPTがつなげるのはインターネット上のサーバーだけです。ほかのアプリを選んでください。
選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。
MATRICULA_CACHE_DIR envMATRICULA_TIMEOUT envMATRICULA_MIN_INTERVAL envMATRICULA_SEARCH_INTERVAL envMATRICULA_CONTACT envMATRICULA_DOWNLOAD_DIR envMATRICULA_IMAGE_ACCESS envこの設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。
パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。
誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック
レジストリ名は、リポジトリを所有するGitHubアカウント ianderso で確認済みです
このリポジトリはまだGitHubから読み取っていません
このリポジトリはまだGitHubから読み取っていません
これはパソコンで動くため、インターネット上のエンドポイントはありません
パソコンで動き、代わりにローカルの設定を使います
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです
レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。
当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。
レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。
あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。
GitHubリポジトリの最終更新は–、最新バージョン(0.1.0)がレジストリに届いたのは27 日前です。
Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。
同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Master CSS
同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。
カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i
MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.
Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.
Inspect Master CSS classes, generated CSS, and project stylesheets from your AI client.
作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。
An MCP server for Matricula Online (data.matricula-online.eu), the church-book portal that ICARUS, the International Centre for Archival Research, runs for dioceses and archives in Germany, Austria, Poland, Slovenia, Serbia, Italy, Switzerland, Luxembourg and Bosnia and Herzegovina. Matricula publishes their parish registers (baptisms, marriages and burials, and the indexes, family books and parish censuses that go with them), scanned page by page: about 13,400 parishes by its own count in October 2026.
The server walks Matricula's own hierarchy. It lists the countries and their *sections* (each a diocese, an archive or a private collection), a section's parishes with their coordinates, a parish's registers with their signatures, types and dates, and a register's pages, each with its label and the link that opens it in Matricula's own viewer. It also runs Matricula's place search, which finds the parish a village belonged to.
It works the way a careful genealogist does. The register page is the evidence. A register's type and dates, a page label and a search snippet are finding aids that say which page to open. Every result carries a citation in the order Matricula itself gives for finding a page again: diocese or archive, parish, register signature, page.
Page images are read in Matricula's viewer, not fetched by this server. Matricula's image host refuses scripted requests, and this server does not pretend to be a browser to get past it. The code that would save one page image is here, documented and tested, but switched off: it is for the day ICARUS grants access to an identified client. See Page images.
Nothing here writes to Matricula, and nothing here keeps a family tree.
This is an independent project. It is not affiliated with, endorsed by, or supported by ICARUS or any of the archives and dioceses whose registers Matricula publishes.
The server publishes seven tools. All but matricula_page_image are read-only; that one creates a new file only when image access is on, and never overwrites one.
Finding
| Tool | Purpose |
|---|---|
matricula_sections | The countries and, in each, its sections (dioceses and archives), with Matricula's parish counts. |
matricula_parishes | The parishes of one section, filtered by name, with coordinates, and the section's own note (often the archive's address). |
matricula_search | Matricula's place search: parishes whose names or descriptions name a place, with the snippet that shows where. Optionally limited to a section or to registers in a span of years. |
Reading
| Tool | Purpose |
|---|---|
matricula_registers | A parish's registers: signature, the archive's own type (Taufen, Trauungen, Sterben, Index - ...), a kind (baptisms, marriages, burials, ...), dates, contents notes, where the original is held, and each register's key. |
matricula_register | One register: its description and citation, and every page's position, label and viewer link, with paging and a label filter. |
matricula_page_image | Off unless the operator has turned image access on. While off, it answers images_not_enabled with the page's viewer link, label and citation. When on, it saves one page as a new .jpg with its citation. |
cache_status | This session's requests, the pacing, cache use, and whether image access is on. Makes no request. |
Everything is addressed by its path on Matricula below the language prefix, which the tools call a key: deutschland/passau is a section, oesterreich/salzburg/krimml a parish, oesterreich/salzburg/krimml/TFBI a register. Every tool also takes a Matricula address in any of its interface languages, and a register's tools take a page's viewer address (?pg=N).
You need Python 3.11 or later and uv. There is no key to request.
Without cloning. uvx fetches it from PyPI and runs it in one step:
uvx matricula-mcp
From a clone, which is what you want if you will change it:
git clone https://github.com/ianderso/matricula-mcp
cd matricula-mcp uv sync uv run matricula-mcp # stdio server, usually launched by the client
Either way the server speaks MCP over stdio, so you will normally let an MCP client start it rather than run it by hand.
{
"mcpServers": { "matricula": { "command": "uvx", "args": ["matricula-mcp"], "env": { "MATRICULA_CONTACT": "you@example.org" } } } }
A desktop app does not always inherit your shell's PATH. If the server fails to start because uvx cannot be found, give the full path that which uvx prints as the command.
claude mcp add matricula -e MATRICULA_CONTACT=you@example.org -- uvx matricula-mcp
Nothing is required. A .env file in the directory the server starts in supplies anything the environment does not; only that directory is read.
| Variable | Meaning |
|---|---|
MATRICULA_CACHE_DIR | Response cache directory. Default ~/.cache/matricula-mcp. |
MATRICULA_TIMEOUT | HTTP timeout in seconds for one request. Default 30. Image downloads get 120 to read. |
MATRICULA_MIN_INTERVAL | Least seconds between two requests to Matricula. Default 2, and never below 2. |
MATRICULA_SEARCH_INTERVAL | Least seconds between two place searches. Default 10, and never below 10. |
MATRICULA_CONTACT | An email address or URL added to the User-Agent, so ICARUS can reach you if your use causes trouble. Optional for reading the catalogue, courteous, and required for image access. |
MATRICULA_DOWNLOAD_DIR | An existing folder. When set, matricula_page_image saves only inside it. Set it to save into an iCloud Drive folder, which lives under ~/Library. |
MATRICULA_IMAGE_ACCESS | Leave unset. Set it to granted only once ICARUS has granted your client access to its image host; it needs MATRICULA_CONTACT. Any other value is refused. See Page images. |
An unusable value is reported on the first tool call as a not_configured result naming the variable.
Matricula's viewer loads each page from img.data.matricula-online.eu. That host answered 403 to a plain scripted request when this project surveyed it (with Vary: Origin), and the viewer attaches a per-session token, computed in the browser, to every image request. That is Matricula's access control, and this server treats it as one. It does not imitate a browser, send an Origin or Referer header, carry a session cookie, or reproduce the viewer's token, and it never probes the host to find out what would get through. A test fails if anything resembling a browser disguise appears in the source.
So, by default, matricula_page_image fetches nothing. It answers images_not_enabled with the page's viewer link, its label and its citation, and the person reads the page in Matricula's viewer.
The code that would save a page is written and tested against a mocked host, for the day ICARUS grants access to an identified client. If you obtain that permission (by agreement with ICARUS, for your own client), set MATRICULA_CONTACT to the address ICARUS knows you by and MATRICULA_IMAGE_ACCESS=granted. The tool then fetches one page at a time from the image host, paced like every other request, with this server's own User-Agent (matricula-mcp/ (+https://github.com/ianderso/matricula-mcp; )) and nothing else. If the host still refuses, the tool says so (image_refused) and writes nothing. Should ICARUS specify a different route (an API, a key, another host), the client is to change in a release to use exactly that route; no setting here invents one.
A saved page is a new .jpg, never a hidden file or one under ~/Library (unless MATRICULA_DOWNLOAD_DIR is set there), and comes with its citation and its licence, CC BY-NC-ND 2.0.
Matricula is one service, run by an association of archives. The client sends one request at a time, at least two seconds apart, and a place search at least ten seconds after the last, because a search reads every parish description in the portal. Country and section lists and parish lists are cached for 28 days, parish and register pages for 7, searches for a day. Two identical calls in flight share one request. A 429, a 5xx or a dropped connection gets one retry, honouring Retry-After; a refusal is not retried. The User-Agent names the package, its version, this repository and, when set, your contact. No cookies are kept.
The terms of use (German; checked 2026-10-11) cover the images and descriptive metadata on data.matricula-online.eu:
matricula_parishes passes on each section's own note, which often names the archive and how to reach it: the place to send that notice.
Matricula's robots.txt (served from cdn-static.matricula-online.eu, read 2026-10-11) names several crawlers, ClaudeBot, GPTBot and CCBot among them, with Disallow: /, and asks every other agent to keep away from four kinds of address: the viewer's page parameter (/*?pg=), the search (/*/suchen), the map features (/*/landkarte-features) and accounts. This server is not a crawler: it reads the pages a researcher asks for, one at a time, and caches them. It reads the search (matricula_search) and one map features file per section (for matricula_parishes' coordinates); it builds ?pg= links for a person to open and never requests them; it never touches accounts. Whether that suits your use is yours to judge.
citation gives them in that order, with cite_as as one sentence.?pg= takes. The label (02-Taufe_0001, 001-03_0004-r) is the archive's name for the scan: a section and number, or a folio and side. Cite both.Index - Taufen and Passau's Register Taufen are indexes (index: true); Baden-Württemberg's Taufregister is the register itself.冒頭だけを表示しています。続きはリポジトリで読めます