プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。Google でログインするとレビューを書けます。プロトタイプ · 30分ごとに更新
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Bluetooth LE Health Sensors

作者:K-Dense-AIバージョン 0.1.3i★ 32 (リポジトリ全体のスター)iパソコンで動くリポジトリ ↗
レジストリ名io.github.K-Dense-AI/labmcp-ble-health

インストール方法

What it does

MCP server for Bluetooth LE health sensors (standard GATT profiles).

  • Connects パソコンで動く
  • Account or key No key needed
  • Category クリニック・健康

この順位の理由

一覧は利用スコア(100 点満点)で並びます。内訳は次のとおり

人気0/80GitHub スターか週間ダウンロード数。大きい方を 60、小さい方を 20 で数えます
新しさ7/1230 日以内のリリースかコード更新で満点
応答中0/8前回の確認でクラウドのエンドポイントが応答
利用スコア7/100

品質: 基本チェック 3/3 項目に合格(表示のみ、並び順には不使用) · 勢い: データなし (「急上昇」タブでのみ使用)

インストール

使っているAIアプリを選んで、設定をコピーしてください。

ひとことで AI にインストールしてもらう

Bluetooth LE Health Sensors をインストールして。https://mcp.popnx.com/i/k-dense-ai-labmcp-ble-health.md に従い、コマンドを見せて、私が OK するまで実行しないで。

パソコンで作業できる AI(Claude Code や Cursor など)に貼り付けます。手順を読み、コマンドを見せて、あなたの OK を待ちます。キー不要・登録不要。 · AI が読む全文を見る

チェック 3/3 合格 · あなたのパソコンで動きます · ✓ コマンド確認済み 2026年11月14日

まず:どの AI を使っていますか?

使っているアプリを選ぶと、下に手順が表示されます。

Claude につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません

AI にインストールしてもらう

このメッセージを Claude のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude に MCP server Bluetooth LE Health Sensors を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "labmcp-ble-health": { "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Bluetooth LE Health Sensors のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. パソコン版 Claude アプリの設定ファイルを開く

    SettingsDeveloperEdit Config

  3. この設定を貼り付けて保存

    {
      "mcpServers": {
        "labmcp-ble-health": {
          "command": "uvx",
          "args": [
            "labmcp-ble-health"
          ]
        }
      }
    }
  4. Claude を終了してもう一度開く

  5. 試してみる

    Bluetooth LE Health Sensors を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude が Bluetooth LE Health Sensors を使っていると言うか、回答に Bluetooth LE Health Sensors のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

ChatGPT はまだ Bluetooth LE Health Sensors につなげません

Bluetooth LE Health Sensors はパソコンに入れて使うものですが、ChatGPT は Web 上で動くサーバーにしかつなげません

代わりにできること

A · Bluetooth LE Health Sensors につなげるアプリを使う

  • 先にパソコンへ Python (uv) を入れてください(1 回だけ) · パソコン版 Claude アプリ(Windows または Mac)のみ。Web やスマホでは使えません
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)
  • 先にパソコンへ Python (uv) を入れてください(1 回だけ)

B · クリニック・健康 の中で ChatGPT につなげる別のサーバー

同じカテゴリでよく使われているものから、キーなしでアドレスだけでつなげるものを選びました

Claude Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Claude Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Claude Code に MCP server Bluetooth LE Health Sensors を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Bluetooth LE Health Sensors のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. ターミナルを開く

    Mac:Command+スペースで Terminal と入力 · Windows:PowerShell を開く

  3. このコマンドを貼り付けて Enter

    claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health
  4. Claude Code で /mcp と入力

    Bluetooth LE Health Sensors が一覧にあり、接続済みと表示されれば OK です

  5. 試してみる

    Bluetooth LE Health Sensors を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Claude Code が Bluetooth LE Health Sensors を使っていると言うか、回答に Bluetooth LE Health Sensors のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Anthropic のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Cursor につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを Cursor のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの Cursor に MCP server Bluetooth LE Health Sensors を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "mcpServers": { "labmcp-ble-health": { "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Bluetooth LE Health Sensors のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで Cursor を開く

    Cursor で開く

    Cursor がインストールの確認をするので Install を押します

  3. Cursor の AI チャットを Agent モードで開く

  4. 試してみる

    Bluetooth LE Health Sensors を使って、私に何ができるか教えて、1 つやってみせて

    ✓ Cursor が Bluetooth LE Health Sensors を使っていると言うか、回答に Bluetooth LE Health Sensors のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に Cursor のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

VS Code につなげますが、先に準備が必要です

先にパソコンへ Python (uv) を入れてください(1 回だけ)

AI にインストールしてもらう

このメッセージを VS Code のチャットに貼り付けます。AI がパソコンを確認し、変更するファイルを伝え、毎回あなたの了承を待ちます。

このパソコンの VS Code に MCP server Bluetooth LE Health Sensors を入れてください。順番に:1) uv --version で uv があるか確認。なければ https://docs.astral.sh/uv/getting-started/installation/ から入れるよう私に伝え、自分では入れない。2) この設定だけを使う(PopNx MCP の確認済み):{ "servers": { "labmcp-ble-health": { "type": "stdio", "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 変更するファイルのフルパスか実行するコマンドを伝えて、私の了承を待つ。4) キーは不要。5) 了承した内容を実行し、Bluetooth LE Health Sensors のツールが本当に表示されるか確認する。

このメッセージにあなたのキーは含まれません。キーが必要な場合は、AI がファイルやアプリの入力欄にご自身で貼るよう案内します。

  1. uv を入れる(まだなければ)

    もう入っていますか?先に確認 · ターミナルを開き、このコマンドを入力して Enter

    uv --version
    • バージョン番号(例 uv …)が出る = 入っています。この手順は飛ばせます
    • "command not found"(Windows では "is not recognized")が出る = まだ入っていないか、入れた直後でターミナルを開き直す必要があります
    ターミナルの開き方

    Mac:⌘ + Space を押し、Terminal と入力して Enter

    Windows:スタートメニューを開き、Windows PowerShell と入力して「開く」

    まだ入っていない場合: uv にはクリック式のインストーラーがありません。uv 公式ページからお使いの OS(macOS か Windows)用の 1 行コマンドをコピーしてターミナルに貼り付けます · Python を別に入れる必要はなく、必要なときに uv が自動で取得します

    uv のダウンロードページを開く ↗

    入れ終わったらターミナルを閉じて開き直し、同じコマンドをもう一度実行します。バージョン番号が出れば完了です: uv --version

    一度入れれば、uv を使うすべてのツールで使えます

  2. このボタンで VS Code を開く

    VS Code で開く

    VS Code がインストールの確認をするので Install を押します

  3. VS Code の AI チャットを Agent モードで開く

  4. 試してみる

    Bluetooth LE Health Sensors を使って、私に何ができるか教えて、1 つやってみせて

    ✓ VS Code が Bluetooth LE Health Sensors を使っていると言うか、回答に Bluetooth LE Health Sensors のツール名が出れば接続成功です

追加の設定 4 項目(入力しなくても使えます)

上のコマンドはこれらがなくても動きます。変えたいときだけ作者の説明に沿って追加してください。

  • LABMCP_ADDRESS 計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS 安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

メニュー名は 2026年11月11日 に VS Code のヘルプページで確認 · アプリのバージョンにより画面が少し違うことがあります

Windsurf、Zed、Gemini CLI など MCP を使える他のアプリは追加方法がそれぞれ違います。アプリ一覧で確認してください

MCP を使えるアプリをすべて見る →

JSON 設定は下の「開発者向け」にあります

つまずいたら?Bluetooth LE Health Sensors を使っている人に聞いてみましょう💬 ディスカッション →
開発者向け:ターミナルのコマンドと JSON 設定

パソコンにインストール

Claude Code

claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-ble-health": {
      "command": "uvx",
      "args": [
        "labmcp-ble-health"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-ble-health": {
      "command": "uvx",
      "args": [
        "labmcp-ble-health"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-ble-health": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-ble-health"
      ]
    }
  }
}

自分で入力する値

  • LABMCP_ADDRESS env
    計測器のアドレス(例: serial:///dev/ttyUSB0 または tcp://192.168.1.50:5025)
    英語の原文を見るInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    1 に設定すると、内蔵シミュレーターを使用します(ハードウェア不要)。
    英語の原文を見るSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    1 に設定すると、状態を変更するすべてのツールを無効にします。
    英語の原文を見るSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    安全上限の上書き値。例: max_temperature_c=80
    英語の原文を見るSafety limit overrides, e.g. max_temperature_c=80

説明は自動翻訳です。変数名は原文のままです。迷ったら原文を確認してください。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

ひと目でわかる

GitHubスターi
32 (リポジトリ全体のスター)
このリポジトリには複数の MCP があり、スターは順位で1件だけ数えます
週あたりのダウンロードi
41/週
接続方法
パソコンで動く
最新バージョンi
0.1.3
レジストリ公開日i
2026年9月27日
コードの最終更新i
2026年9月27日
作者
K-Dense-AI
パッケージ
pypi: labmcp-ble-health
ウェブサイト
github.com
レジストリでの状態
有効

使えるアプリ

このサーバーのつなぎ方と、各アプリの公式ドキュメントに基づきます。2026年11月10日に確認。

パソコン上で動かせるアプリ

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

すべてのアプリと長所・短所 →

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月19日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント K-Dense-AI で確認済みです

  • ✓ 合格

    今もメンテナンスされている

    コードの最終更新:2 か月前

  • ✓ 合格

    ライセンスがある

    Apache-2.0を使用

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

公開済みの脆弱性(OSV.dev)

OSV.dev に labmcp-ble-health@0.1.3 の登録はありません

このバージョンのパッケージ本体のみ確認。すべての依存関係ではありません · 確認日 2026年11月16日

確認していること → · JSON

作者の方へ:再確認の依頼・情報の誤りの報告
作者向け:README にバッジを付ける

作者の方は、このコードを README に貼れます。バッジはこのページにリンクします。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-ble-health.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-ble-health)

話し合い

質問、コツの共有、使えないことの報告ができます。「役に立った」の多い順です。

まだ投稿はありません。最初の質問や共有をどうぞ。

ここの投稿は利用者によるもので、PopNx チームのものではありません。

ログインして投稿

ユーザーレビュー

まだレビューはありません

ログインしてレビューを書く

クリニック・健康のほかのサーバーとの比較i

  • このカテゴリのほかの1190件のうち0%よりスターが多い
  • このカテゴリのほかの1190件のうち36%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1190件のうち99%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Bluetooth LE Health Sensorsは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は2 か月前、最新バージョン(0.1.3)がレジストリに届いたのは2 か月前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。

代わりに使えるものは?

同じカテゴリには:Medplum MCP, Codescene MCP Server, Marrow, WHOOP — MissingMCP, athletedata

似た働きのほかの候補

同じカテゴリでほかの作者のもの。コマンドは確認済み。公式を先に、次にスター順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Medplum MCP

Securely access and manage FHIR healthcare data stored in Medplum.

作者:medplum広く使われている★ 28044 か月前更新

クラウドで動く✓ 提供元 · medplum.com

WHOOP — MissingMCP

WHOOP recovery, strain, sleep and workouts in Claude via official WHOOP OAuth. Free, open source.

作者:VelkyVenik初期★ 21 リポジトリ全体のスター4 か月前更新

クラウドで動く✓ missingmcp.com
似たものと比べる
これ
Bluetooth LE Health Sensors
Medplum MCPCodescene MCP ServerMarrowWHOOP — MissingMCPathletedata
動く場所パソコンにインストールが必要クラウドで動き、インストール不要パソコンにインストールが必要パソコンにインストールが必要クラウドで動き、インストール不要クラウドで動き、インストール不要
キーが必要いいえいいえいいえいいえいいえいいえ
Claude で + から追加いいえいいえいいえいいえいいえはい
基本チェック3/34/42/33/32/44/4
ライセンスApache-2.0Apache-2.0NOASSERTIONMITMITMIT
料金登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし登録情報に費用の記載なし

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Bluetooth LE Health Sensors — MCP Server

Let an AI agent read any Bluetooth Low Energy sensor that implements the standard Bluetooth SIG health profiles: record heart rate with RR intervals and HRV from a chest strap, read SpO2 and pulse rate from an oximeter, and capture blood pressure, body temperature and weight readings from monitors, thermometers and scales, in physiology labs, sports-science studies, sleep/HRV research and lab-operations settings.

[!WARNING]

Research and lab-operations use only. This is not a medical device. It is not intended for diagnosis, monitoring of patients, triage, or any clinical decision-making, and has not been validated or cleared by any regulator. Consumer sensors can be inaccurate; values pass through an AI agent that can misread them. Never use this server's output to make health decisions. Readings of people are personal data: follow your ethics approval and data-protection rules.

Packagelabmcp-ble-health
InstrumentsAny device implementing the Bluetooth SIG profiles: heart-rate straps/armbands (Heart Rate Service 0x180D), pulse oximeters (Pulse Oximeter Service 0x1822), blood pressure monitors (0x1810), thermometers (Health Thermometer 0x1809), weight scales (Weight Scale 0x181D), plus Battery (0x180F) and Device Information (0x180A)
InterfacesBluetooth Low Energy, via bleak (Linux/BlueZ, macOS/CoreBluetooth, Windows/WinRT)
ProtocolBluetooth SIG GATT: GATT Specification Supplement, HRS 1.0, PLXS 1.0.1, BLS 1.1.1, HTS 1.0, WSS 1.0.1; IEEE 11073-20601 SFLOAT/FLOAT per the PHD Transcoding White Paper v16
Status🧪 simulated: tested against a simulated BLE backend that emits byte-exact GATT packets, not yet verified on hardware. Report a hardware test

Try it without hardware

uvx labmcp-ble-health --simulate --check

The simulator provides six devices (addresses 00:00:5E:00:53:01–06, from the IANA documentation range): a combined "health kit" (default) exposing every service, and a separate HR strap, oximeter, BP monitor, thermometer and scale. Pick one with e.g. --simulate --address 00:00:5E:00:53:04.

Connect your device

  1. Check the device uses the standard profiles. Only devices that implement the Bluetooth SIG services above work. Many consumer wearables (most smartwatches, many fitness bands, several BP-monitor and scale brands) use proprietary protocols instead, and some only speak the standard profile in a "pairing"/"data transfer" mode. Chest straps that advertise the Heart Rate Service are the most reliable choice for HRV work.
  2. Free the device. A BLE sensor usually accepts one connection: close the vendor's phone app (or switch phone Bluetooth off) before connecting.
  3. Find the address: start the server without --address and ask the agent to run scan_devices, or run it with --check after putting the device in advertising mode (wear the strap; press the monitor's Bluetooth/start button). On Linux/Windows the address is the MAC (AA:BB:CC:DD:EE:FF); on macOS it is a CoreBluetooth UUID that is specific to your computer.
  4. Test the connection:
   uvx labmcp-ble-health --address AA:BB:CC:DD:EE:FF --check                       # Linux / Windows

uvx labmcp-ble-health --address 1A2B3C4D-1111-2222-3333-444455556666 --check # macOS

   Devices that require bonding (common for BP monitors and scales): add `--option pair=true` on Linux/Windows; macOS shows a system pairing prompt automatically. On Linux choose a non-default adapter with `--option adapter=hci1`; lengthen device discovery with `--option connect_timeout_s=40` (at most 60 s).

macOS: the terminal (or MCP client app) that launches the server needs Bluetooth permission (System Settings › Privacy & Security › Bluetooth). Without it macOS terminates the process as soon as Bluetooth is touched (exit code 134), before any error message can be printed.

Add to your MCP client

Claude Code

claude mcp add hr-strap -- uvx labmcp-ble-health --address AA:BB:CC:DD:EE:FF

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "hr-strap": { "command": "uvx", "args": ["labmcp-ble-health", "--address", "AA:BB:CC:DD:EE:FF"] } } }

Every tool is read-only (nothing on the device is changed, no control points are written), so --read-only makes no difference. Run one server entry per device if you use several sensors at once. For other clients, generate the snippet with uvx labmcp config ble-health --address AA:BB:CC:DD:EE:FF --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_device_info👁 readRead the device's identity (manufacturer, model, serial, firmware), the standard health services it exposes and its features.
read_battery👁 readRead the device's battery level (Battery Service, 0-100 %).
read_pulse_oximetry👁 readRead SpO2 (%) and pulse rate from a pulse oximeter, averaged over a few seconds or as a single spot-check reading.
read_temperature👁 readWait for a thermometer to send a temperature measurement and return it in °C.
read_weight👁 readWait for a scale to send a weight measurement (kg), with BMI and height if the scale sends them.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
record_heart_rate👁 readRecord heart rate for duration_s: bpm series, RR intervals and time-domain HRV (mean HR, SDNN, RMSSD, pNN50).
scan_devices👁 readScan for nearby Bluetooth LE devices: address, name, signal strength and advertised health services. Works without a configured --address.
wait_for_blood_pressure👁 readWait for a blood pressure monitor to send a measurement: systolic, diastolic and mean arterial pressure (mmHg) and pulse rate.

get_connection_info, get_command_log and reconnect are built into every LabMCP server.

Safety limits

LimitDefaultMeaning
max_record_duration_s600 sLongest heart-rate recording or continuous-oximetry averaging window an agent may start
max_wait_s300 sLongest time a tool may wait for a blood pressure, temperature, weight or spot-check reading

Override at launch: --limit max_record_duration_s=1800. Note that many MCP clients also enforce their own per-tool-call timeout; long recordings may need that raised too (e.g. MCP_TOOL_TIMEOUT in Claude Code).

Example prompts

  • "Record 5 minutes of heart rate from the chest strap and give me mean HR, SDNN and RMSSD, and save the raw RR intervals to ~/hrv/p07_baseline.csv."
  • "Scan for heart-rate straps nearby and tell me which one has the strongest signal."
  • "Wait for the blood pressure monitor: I'll start the cuff now. Report systolic/diastolic and whether the device flagged movement or an irregular pulse."
  • "Average SpO2 and pulse rate over 30 seconds from the oximeter and tell me how many samples were unusable."
  • "Read the scale when the participant steps on it and log weight and BMI with the device timestamp."
  • "What's the battery level of the strap before we start the session?"

Notes

  • Measurement devices push, they are not polled. Blood pressure monitors, thermometers, scales and spot-check oximeters only *indicate* a value when a measurement completes (these characteristics cannot be read). Call the tool first, then take the measurement. The tool keeps scanning and reconnecting until its timeout because many monitors only advertise right after measuring (for oximeters this needs mode="spot_check"; auto must connect first to find out which mode the device supports).
  • One measurement at a time. Starting a measurement cancels one that is still running on the same server (for example a recording whose tool call already timed out in the MCP client), and reconnect cancels it too; the cancelled call returns an error.
  • Malformed packets are skipped and logged (get_command_log) rather than discarding the whole recording; record_heart_rate and read_pulse_oximetry report how many in malformed_packets.
  • `save_path` (record_heart_rate) must be a new .csv file: ~ is expanded, missing folders are created, and an existing file is never overwritten. It is checked before recording starts.
  • Stored measurements. Monitors send unsent stored readings back-to-back, oldest first, when they connect. Tools keep listening 1.5 s after the first one and return the newest as the result, listing older ones in other_measurements; the device clock time is in device_timestamp (device local time, often wrong if the clock was never set).
  • Special values (IEEE 11073 NaN, NRes, ±INF) are never turned into numbers: they are reported as null with an explanation (special_values, unavailable_samples). Oximeters typically send NaN for the first seconds while acquiring.
  • Units: blood pressure in kPa is converted to mmHg (1 kPa = 7.500617 mmHg), °F to °C, lb to kg; unit_reported says what the device sent. Weight resolution is 0.005 kg / 0.01 lb per the Weight Scale spec; 0xFFFF means "measurement unsuccessful" and is returned as weight_kg: null. Energy expended is in kJ (HRS 1.0).
  • HRV is computed from the RR intervals the sensor sends (unit 1/1024 s): SDNN (sample SD), RMSSD, pNN50. RR intervals outside 0.3–2.0 s are excluded as artefacts; no further artefact correction or ectopic-beat editing is done. If a notification is lost over the air, the successive difference across that gap is not a true beat-to-beat difference. Optical wrist sensors often send no RR intervals at all. Use a validated ECG system for anything beyond exploratory research.
  • The Enhanced Blood Pressure Measurement, Record Access Control Point (downloading a monitor's whole memory), Current Time and User Data services are not implemented; nothing is ever written to the device.
  • Bluetooth pairing, bonding keys and OS permissions are handled by the operating system; the server never sees PINs.

Hardware verification

ModelFirmwareInterfaceVerified byDate
*none yet: be the first*