プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Fermi

作者:Kromatic-Innovationバージョン 1.1.0i★ –iクラウドで動く
レジストリ名io.github.Kromatic-Innovation/fermi

インストール

概要

作者による説明(英語の原文)

Calibrated probability ranges for forecasting questions, with the assumptions behind them.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://fermi.kromatic.com/mcp

ターミナルでこれを実行します

claude mcp add --transport http fermi https://fermi.kromatic.com/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "fermi": {
      "url": "https://fermi.kromatic.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "fermi": {
      "type": "http",
      "url": "https://fermi.kromatic.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://fermi.kromatic.com/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月7日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • estimate_quantity_or_probability

    Estimates an uncertain number, or the probability that an event happens by a date, from a question in plain language, and returns a calibrated range and probability distribution. Use this when the user asks how much, how many, how big or how long something is or will be (market s

  • get_estimate_result

    Reads one estimate you already requested, by its estimate_id. Use this when a tier-3 (deep research) estimate came back with status "pending" and you want to know whether it is finished, or to show an earlier estimate again. Tier-3 results are only delivered this way (or to a cal

  • list_my_estimates

    Lists the past estimates on your account, newest first. Use this when the user wants to find an earlier estimate ("what did I estimate last week?") or has lost an estimate_id. Returns estimates, each with estimate_id, created_at, question, unit, target_horizon, point_estimate, es

  • send_feedback

    Sends a short report about Fermi to the team that builds it. They read every report and use it to fix problems and decide what to build, so honest feedback, good or bad, is useful. Use this when: - a Fermi tool returned an error (send it right away), behaved unexpectedly or gave

  • buy_credits

    Buys Fermi credits by charging the card saved on your account, and returns the new balance. Use this when the user explicitly asks to buy or top up Fermi credits. Returns credits_purchased, new_balance and payment_status. If no card is saved yet, nothing is charged: it returns a

  • check_account_and_credits

    Reports who you are to Fermi and what you can spend: whether you are using Fermi without an account or with one, your credit balance or free estimates left today, and what each tier costs. Use this before a paid estimate to check the price or balance, after one to see what is lef

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント Kromatic-Innovation で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    59ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    6件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32742件のうち0%よりスターが多い
  • このカテゴリのほかの32742件のうち78%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32742件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Fermiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.1.0)がレジストリに届いたのは10 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Asset Notation

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

Asset Notation

作者:assetnotation

Read and maintain an Asset Notation file on disk: net worth, holdings, valuations, CSV import.

パソコンで動く今日更新
インストール

作者のREADME

リポジトリにREADMEが見つかりません

PopNxに聞く