プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

livedot MCP

作者:livedotmeバージョン 1.0.1i★ –iクラウドで動く
レジストリ名me.livedot/mcp

インストール

概要

作者による説明(英語の原文)

Find someone in a live running or cycling race, clubs and coaches near you, and race-day weather.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

  • 基本チェック:1項目中1項目に合格
  • 作者のサーバーで動きます。あなたが頼んだ内容は、作者のサーバーを通ります。
  • レジストリには、入力が必要なキーは載っていません。

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://livedot.me/mcp

ターミナルでこれを実行します

claude mcp add --transport http livedot https://livedot.me/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "livedot": {
      "url": "https://livedot.me/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "livedot": {
      "type": "http",
      "url": "https://livedot.me/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://livedot.me/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

このサーバーのツール一覧はまだ読み取っていません。エンドポイントは順番にチェックしています。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン livedot.me で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    エンドポイントが応答する

    まだチェックしていません。エンドポイントは順番にチェックしています

  • … 未チェック

    OAuthでサインイン

    まだチェックしていません。エンドポイントは順番にチェックしています

  • … 未チェック

    ツールの説明に隠れた指示がない

    まだチェックしていません。エンドポイントをチェックするときにツール一覧を読み取ります

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32718件のうち0%よりスターが多い
  • このカテゴリのほかの32718件のうち66%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32718件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

livedot MCPは安全ですか?

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.1)がレジストリに届いたのは20 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, MemberVault MCP by usefulapi

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

livedot MCP

Live races, clubs and coaches, in ChatGPT and Claude.

Ask where someone is in a live race (“Where's Megan in the Comrades?”), which running or cycling club to join near you (“Which cycling club should I join in Johannesburg?”), or for a coach near you (“Running coach near Sandton”), and get the answer with a live map and the weather in the chat.

https://livedot.me/mcp · free · asking needs no sign-in

Try it in 30 seconds

The server URL is https://livedot.me/mcp (Streamable HTTP). No key, no account, no headers.

ChatGPT

  1. Settings → Apps & Connectors → Advanced settings: turn on Developer mode.
  2. Create: name livedot, MCP server URL https://livedot.me/mcp, authentication No authentication.
  3. Ask: *“Where’s the demo runner in the Comrades demo?”*

Claude (web and desktop)

  1. Settings → Connectors → Add custom connector.
  2. Name livedot, URL https://livedot.me/mcp.
  3. Ask: *“Fly the Comrades.”*

Claude Code

claude mcp add --transport http livedot https://livedot.me/mcp

Cursor (~/.cursor/mcp.json)

{ "mcpServers": { "livedot": { "url": "https://livedot.me/mcp" } } }

Any other MCP client: point it at https://livedot.me/mcp.

What you can ask

Real answers, word for word, on sample data and the apps' demo races.

“Where’s Megan in the Comrades?” (find_person, then where_is)

I found 20+ Megans in the Comrades. Here are the 5 most likely:

1. Megan N. (livedot.me/megan), km 58, 6:20 /km, 18 min behind goal

2. Megan B., km 61, 5:58 /km

3. Megan N., km 66, 5:32 /km

…

Megan N. is at km 58 (mile 36) of 90 km (56 mi) in the Comrades, 18 minutes behind the goal (9:00:00). Running at 6:20 /km (10:12 /mi). Where Megan is: 31°C (88°F), calm air at 5 km/h (3 mph), rated very hard (heat stress Extreme). The road ahead (km 57–69) rates Tough: Heat stress Extreme from km 57 (WBGT up to 32°) · Weather costs about 9 min (heat and humidity, from km 57). At this pace Megan finishes around 11:43 race time.

Follow live: https://livedot.me/megan

Live tracking, proudly brought to you free thanks to ProLend.

“Fly the Comrades” (fly_route)

Here's the Comrades Marathon (demo) course from the air: 90 km (56 mi), with the weather along it. Press play on the map to fly it. … Rated Tough (Heat stress High from km 12, Extreme from 30 (WBGT up to 31°)). About 20°C (68°F) at the start and 27°C (81°F) at the finish. …

Fly it in 3D: https://runfast.tech/live/race/comrades-demo

“What will the weather be like for the NYC Marathon?” (event_weather)

TCS New York City Marathon 2026: Sunday 1 November 2026, start 10:20 AM. Based on 10 years of weather on this date (Copernicus ERA5, 2015–2024), not a forecast. Rated Good. About 55°F (13°C) at the start and 58°F (14°C) at the finish. Heat stress Low. Rain on about 3 days in 10. …

More: https://livedot.me/guides/nyc-marathon-2026-weather/

“What’s the ProLend 2027 Durban Tour route? Give me the GPX files.” (tour_route)

ProLend 2027 Durban Tour: 6 days, 771 km (479 mi).

Day 1: Johannesburg to Villiers, 164 km (102 mi), 1,185 m of climbing, start 6:00.

…

Day 6: Greytown to Ballito, 134 km (83 mi), 1,883 m of climbing, start 6:00.

The organiser hasn't made the route files available.

More to try: *“How’s the demo club doing in the Comrades?”* · *“How’s the Coast Classic demo going?”* · *“Is Thandi racing?”* · *“Weather for the Gravel Burn?”* · *“What should I pack for the Durban tour?”* · *“What will the wind be like on this route on Saturday at 6?”* (attach a GPX) · signed in: *“Make my Saturday bunch ride a weekly club ride from this route.”*

Tools

ToolWhat it does
find_personFinds someone racing live by name, livedot handle (@megan, livedot.me/megan) or follow link. One clear match answers at once. Several become a picker ranked live first, then the handle's owner, name closeness and taps on the back; the assistant asks one short question and never guesses. Narrow with event, surname, bib, club, place, wave.
where_isWhere someone is now: km and mile, time against their goal, pace, finish time, the temperature and wind there with the engine's rating, the next few km of wind and heat, and Follow live.
event_statusHow a live race is going: how long it's been under way, how many are on the map, how many finished, who's in front.
club_in_raceHow a club or team is doing in a live race (*“How is the UCT team doing in the Comrades?”*): each of its people on the club’s public live map, with km and goal time, the map with just the club’s dots, and a tap on a face for that person’s card. *“Give the team a tap on the back”* sends one to each member who takes taps. Try *“the demo club in the Comrades”* or *“Coast Riders in the Coast Classic”*.
event_weatherRace-day weather along the course at the times people get there. Inside 10 days, the live forecast; beyond, 10 years of weather on the date, labelled as history.
fly_routeA flyover of the course in the chat, coloured by the weather along it, with Fly it in 3D.
tour_routeA Windline cycling tour by name or organiser: every day (from and to, distance, climbing, start time), the map and the weather. A GPX link for each day only when the organiser shares route files; otherwise it says so.
tour_notes*Beta.* A tour organiser's own notes for riders (what to pack, meeting points), quoted in their words.

| tap_on_the_back | A tap on the back for someone racing live (only when you ask): it buzzes on their phone, through the same tap and rules as their follow page; in the day after their finish, a congratulation. Signed in, it carries your name; if not, the first name you give. | | find_clubs | Running and cycling clubs near a place ("best running club to join in Fourways"): approved clubs and organisers on RunFast and Windline, nearest first, with their weekly sessions, Beginners welcome, Open to anyone (or Members only), pace groups, the next session with its weather, the club's own links page (Club links), and Join to the club's page. beginners: true for beginner-friendly clubs; open: true for clubs anyone can join, no membership needed. Never a person. | | find_coaches | Cycling and running coaches and training groups near a place (*“personal cycling trainer in Joburg”*, *“running coach near Sandton”*): nearest first, with what they coach (road, MTB, gravel, triathlon, beginners, racing, marathon, ultra), how (1-on-1, small group, online), the next group session with its weather, Beginners welcome, the qualifications in their own words (never shown as verified), Book / contact (their own link) and See their page (livedot.me/<slug>). Filter with specialty, format, beginners. None near: *Are you a coach? Get listed free*. Try *“cycling coach in Fourways”* for the demo coach, Coach Thandi (demo). | | find_events | Rides, runs, races and tours near a place and when ("trail runs near Cape Town in November"), soonest first, with the weather (forecast inside 10 days, typical beyond) and I'm in to the event's page. Only published public events of approved clubs and organisers. | | plan_route | The weather along your own route (a GPX file, a Ride with GPS link, or the points or encoded polyline another app's tool gave, e.g. a route or activity map from a fitness app) at the time you'll ride or run it: the forecast inside 10 days, 10 years of weather beyond. Several files are one multi-day tour, ordered as create_event orders them. The map flies over your route in the chat, coloured by the weather; for a 3D flight and a video, save it as a private ride or run. No account. |

For organisers and club admins (sign in)

Connect your Windline or RunFast account and the assistant can work on your own events, exactly as your dashboard lets you:

ToolScopeWhat it does
list_my_eventsevents.readYour events: drafts, published and private, dates, distance, finished or not, with links; and the club and organiser pages you run.
create_eventevents.writeA ride, tour or race (Windline) or run or race (RunFast) from GPX files or links. Drop in several files and it's a tour: days ordered by the numbers in the file names (else by the map), named from the towns at each end, one day after another from your start; you check the plan once, then it's made. Private (just you: My Rides with its own private link, or a private run) or shared (a draft for a group, public once you publish it). Your tour notes for riders, up to 10,000 characters.
update_eventevents.writeName, description, notes, start dates and times. Never a finished event.
add_tour_notesevents.writeA Windline tour's notes for riders (what to pack, meeting points).
publish_eventevents.publishPublishes a draft, only after you confirm. Private events stay private.
invite_membersevents.writeInvite a club's members, or a published tour's riders, by email from a CSV (any delimiter, header or none). A preview first; each person gets one livedot email with Confirm, This wasn't me and Unsubscribe; nobody joins until they confirm; never twice; a day's limit of 500 for club admins and managers, 50 for a tour's organiser, 20 for an account under a week old.
post_club_rideclubs.postA draft group ride or club run on a club or organiser page you run (always the club's, never private). If you run a club and don't say who a ride is for, the assistant asks first.

“Make a two-day tour from these GPX files, starting 6 March at 6:00.” → a draft on your dashboard, with the weather for both days.

How sign-in works. OAuth 2.1 with PKCE and dynamic client registration, following the MCP authorization spec. livedot.me is the issuer (/.well-known/oauth-protected-resource, `/.well-known/oauth-authorization-ser

冒頭だけを表示しています。続きはリポジトリで読めます

PopNxに聞く