プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

HighLevel Agency & Builder MCP

作者:moosheeバージョン 1.1.4i★ –iクラウドで動く
レジストリ名io.github.mooshee/highlevel-agency-mcp

インストール

概要

作者による説明(英語の原文)

Review HighLevel changes. Built by Moosh Works (https://mooshworks.com).

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://ghlagencymcp.com/mcp

ターミナルでこれを実行します

claude mcp add --transport http highlevel-agency https://ghlagencymcp.com/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "highlevel-agency": {
      "url": "https://ghlagencymcp.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "highlevel-agency": {
      "type": "http",
      "url": "https://ghlagencymcp.com/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://ghlagencymcp.com/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • ghl_agency_connection_health

    Check access to the connected sub-account and whether builder access is available.

  • ghl_agency_tools_search

    Find tools and workflow templates by keyword or category.

  • ghl_agency_tools_enable

    Choose read-only access or allow changes after a preview. Every change still requires dryRun=false and the returned preview ID.

  • ghl_agency_contexts

    Show the sub-account selected during connection. Connect again to choose a different sub-account.

  • ghl_agency_doctor

    Check the connected account and access to custom values, calendars, and workflows. Report unavailable permissions separately.

  • ghl_agency_locations

    Read the location profile, timezone and configuration for the connected sub-account.

  • ghl_snapshot_diff_audit

    Compare a supplied snapshot export with this sub-account's live custom values, custom fields, tags and calendars. Include the snapshot ID and at least one asset category. The export is user-supplied; its ownership and freshness are unverified. Missing categories remain unverified

  • ghl_site_builder_sync

    Read a funnel page or preview layout, style, copy, or content changes. Apply the returned preview to the same page. Existing checkout and upsell components must be preserved.

  • ghl_domain_ssl_onboard

    Preview and save a domain record and funnel binding. Report DNS and HTTPS readiness separately. Hosting attachment, page routing and publication require separate steps.

  • ghl_workflow_ivr_builder

    Preview a form-screening, intake, or call-menu workflow, then apply that preview. For multi-step-intake, provide formId and input.tags (one to ten existing tag IDs), input.taskTitle and input.taskBody. Draft creation and publication are separate requested actions.

  • ghl_custom_values_audit

    Find blank custom values, unresolved placeholders, and broken references in the connected sub-account's message templates. Optional supplied templates are checked too.

  • ghl_phone_wallet_audit

    Inspect connected-account phone numbers, number pools, missing routing, and forwarding loops. Routing risks do not establish charges or savings.

  • ghl_user_role_governance

    Compare staff assigned to the connected sub-account with a selected permission preset. This audit does not change roles.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント mooshee で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    267ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    13件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの18333件のうち0%よりスターが多い
  • このカテゴリのほかの18333件のうち83%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの18333件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

HighLevel Agency & Builder MCPは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.1.4)がレジストリに届いたのは8 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Signoff

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

Signoff

作者:ayuanxx-max

Five gates that make an agent's 'done' provable: run them, read the verdict, audit the record.

パソコンで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

HighLevel Agency & Builder MCP

Author: Daniel Hallman (Moosh Works)

Preview page and workflow changes, save domain bindings, and inspect settings for a connected HighLevel sub-account. Review each proposed change before applying it, then verify the saved result.

Connect your assistant

  1. Connect a client that supports Streamable HTTP MCP to https://ghlagencymcp.com/mcp.
  2. On the connection page, provide the intended sub-account's location ID and a dedicated Private Integration Token with only the required permissions. Leave the editing field empty for account checks. Page and workflow tools also need a builder session. Before supplying one, read the credential permissions and revocation instructions. Renewable session credentials carry the HighLevel user's permissions beyond the integration token's scopes. Keep credentials out of chat.
  3. Check ghl_agency_connection_health with includeDoctor: true and confirm the returned location ID.
  4. Reconnect if access expires or the service restarts. See the setup guide for help.

Try a task

  • Compare a supplied snapshot export with the connected sub-account.
  • Check Custom Values for broken merge tags.
  • Preview an update to a funnel headline while preserving its order form.
  • Inspect available phone routing and forwarding loops.

See the skill instructions for the tools and required checks.

Before applying changes

Confirm the target sub-account and whether it is a sandbox or production account. Preview with dryRun: true. Apply an authorized change with dryRun: false and the returned previewId, then read the saved result. Workflow drafts, publication, and delivery are separate outcomes. Domain bindings do not establish DNS, HTTPS, hosting, or publication. Staff-permission and custom-value audits do not change those settings.

For help, use support. See the privacy policy and terms before connecting an account.

Package and review status

This is version 1.1.4 of the public integration package. The separate ChatGPT 1.1.3 listing is in review. Installing this package does not establish ChatGPT directory approval.

Release notes

Version 1.1.4 — October 30, 2026 clarifies credential permissions and revocation. See release notes and the versioned release.

PopNxに聞く