Easyeda MCP Pro

Name: Easyeda MCP Pro
Author: oaslananka

作者：oaslanankaバージョン 1.11.0i★ –iパソコンで動く

レジストリ名io.github.oaslananka/easyeda-mcp-pro

インストール

概要

作者による説明（英語の原文）

MCP server for EasyEDA Pro: PCB inspection, BOM, exports, and hardware review.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

利用者の声iレビューはまだありませんレビューは今後のステップで、アカウント機能と一緒に始まります
私たちの基本チェックi1項目中1項目に合格公開情報からチェック。コードはまだスキャンしていません
利用状況i未計測★ –

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

接続方法: パソコンで動く
トランスポート: stdio
カテゴリ: その他
入力が必要なもの：BRIDGE_TOKEN, AI_API_KEY, JLCPCB_CLIENT_SECRET, LCSC_API_KEY, MOUSER_API_KEY, DIGIKEY_CLIENT_SECRET

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

基本チェック：1項目中1項目に合格
あなたのパソコンで、あなたのユーザーと同じ権限（ファイル、ネットワーク、アプリ）で動きます。
自分で入力するもの： NODE_ENV, LOG_LEVEL, TOOL_PROFILE, TOOL_SCOPES, MCP_PROTOCOL_VERSION, MCP_BRIDGE_BACKEND, MCP_REMOTE_SESSION_ID, TRANSPORT, HTTP_HOST, HTTP_PORT, HTTP_AUTH_DISABLED, HTTP_RATE_LIMIT_MAX, CORS_ORIGIN, ALLOWED_ORIGINS, MCP_TASKS_ENABLED, MCP_APPS_ENABLED, MCP_SKILLS_ENABLED, MCP_V2_EXPERIMENTAL, MCP_RAW_EXEC_EXPERIMENTAL, BRIDGE_HOST, BRIDGE_PORT, BRIDGE_PORT_SCAN, BRIDGE_TIMEOUT_MS, BRIDGE_HEARTBEAT_MS, BRIDGE_WAIT_FOR_EDA_MS, BRIDGE_MAX_PAYLOAD_SIZE, BRIDGE_TOKEN, EASYEDA_DEV_BRIDGE, BRIDGE_RAW_EXEC_ENABLED, DATA_DIR, SQLITE_PATH, ARTIFACT_DIR, CACHE_DIR, AI_PROVIDER, AI_MODEL, AI_API_KEY, AI_MAX_TOKENS, AI_TIMEOUT_MS, AI_ALLOW_DESIGN_MUTATIONS, JLCPCB_MODE, JLCPCB_CLIENT_ID, JLCPCB_CLIENT_SECRET, JLCPCB_API_BASE_URL, JLCPCB_ENABLE_ORDERING, JLCSEARCH_ENABLED, JLCSEARCH_BASE_URL, LCSC_API_KEY, KEYLESS_SOURCING_ENABLED, SOURCING_CACHE_TTL_SECONDS, VENDOR_MIN_REQUEST_INTERVAL_MS, MOUSER_ENABLED, MOUSER_API_KEY, MOUSER_API_BASE_URL, DIGIKEY_ENABLED, DIGIKEY_CLIENT_ID, DIGIKEY_CLIENT_SECRET, DIGIKEY_SANDBOX, DIGIKEY_LOCALE, DIGIKEY_CURRENCY, OAUTH_ENABLED, OAUTH_ISSUER, OAUTH_AUDIENCE, OAUTH_JWKS_URI, OAUTH_REQUIRED_SCOPES, OTEL_ENABLED, OTEL_SERVICE_NAME, OTEL_EXPORTER_OTLP_ENDPOINT, TRACE_SAMPLE_RATE

「秘密」と表示された値は、あなたのアカウントの鍵です。絶対に人に教えたり、チャットに貼り付けたりしないでください。

必要なもの

npmNode.jsのインストール（npxコマンドに必要）

どのアプリを使っていますか？

ClaudeClaude CodeCursorVS CodeChatGPT

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

Claude Desktop → Settings → Developer → Edit Config を開き、claude_desktop_config.json にこれを貼り付けます

{
  "mcpServers": {
    "easyeda-pro": {
      "command": "npx",
      "args": [
        "-y",
        "easyeda-mcp-pro"
      ],
      "env": {
        "NODE_ENV": "your-value",
        "LOG_LEVEL": "your-value",
        "TOOL_PROFILE": "your-value",
        "TOOL_SCOPES": "your-value",
        "MCP_PROTOCOL_VERSION": "your-value",
        "MCP_BRIDGE_BACKEND": "your-value",
        "MCP_REMOTE_SESSION_ID": "your-value",
        "TRANSPORT": "your-value",
        "HTTP_HOST": "your-value",
        "HTTP_PORT": "your-value",
        "HTTP_AUTH_DISABLED": "your-value",
        "HTTP_RATE_LIMIT_MAX": "your-value",
        "CORS_ORIGIN": "your-value",
        "ALLOWED_ORIGINS": "your-value",
        "MCP_TASKS_ENABLED": "your-value",
        "MCP_APPS_ENABLED": "your-value",
        "MCP_SKILLS_ENABLED": "your-value",
        "MCP_V2_EXPERIMENTAL": "your-value",
        "MCP_RAW_EXEC_EXPERIMENTAL": "your-value",
        "BRIDGE_HOST": "your-value",
        "BRIDGE_PORT": "your-value",
        "BRIDGE_PORT_SCAN": "your-value",
        "BRIDGE_TIMEOUT_MS": "your-value",
        "BRIDGE_HEARTBEAT_MS": "your-value",
        "BRIDGE_WAIT_FOR_EDA_MS": "your-value",
        "BRIDGE_MAX_PAYLOAD_SIZE": "your-value",
        "BRIDGE_TOKEN": "your-value",
        "EASYEDA_DEV_BRIDGE": "your-value",
        "BRIDGE_RAW_EXEC_ENABLED": "your-value",
        "DATA_DIR": "your-value",
        "SQLITE_PATH": "your-value",
        "ARTIFACT_DIR": "your-value",
        "CACHE_DIR": "your-value",
        "AI_PROVIDER": "your-value",
        "AI_MODEL": "your-value",
        "AI_API_KEY": "your-value",
        "AI_MAX_TOKENS": "your-value",
        "AI_TIMEOUT_MS": "your-value",
        "AI_ALLOW_DESIGN_MUTATIONS": "your-value",
        "JLCPCB_MODE": "your-value",
        "JLCPCB_CLIENT_ID": "your-value",
        "JLCPCB_CLIENT_SECRET": "your-value",
        "JLCPCB_API_BASE_URL": "your-value",
        "JLCPCB_ENABLE_ORDERING": "your-value",
        "JLCSEARCH_ENABLED": "your-value",
        "JLCSEARCH_BASE_URL": "your-value",
        "LCSC_API_KEY": "your-value",
        "KEYLESS_SOURCING_ENABLED": "your-value",
        "SOURCING_CACHE_TTL_SECONDS": "your-value",
        "VENDOR_MIN_REQUEST_INTERVAL_MS": "your-value",
        "MOUSER_ENABLED": "your-value",
        "MOUSER_API_KEY": "your-value",
        "MOUSER_API_BASE_URL": "your-value",
        "DIGIKEY_ENABLED": "your-value",
        "DIGIKEY_CLIENT_ID": "your-value",
        "DIGIKEY_CLIENT_SECRET": "your-value",
        "DIGIKEY_SANDBOX": "your-value",
        "DIGIKEY_LOCALE": "your-value",
        "DIGIKEY_CURRENCY": "your-value",
        "OAUTH_ENABLED": "your-value",
        "OAUTH_ISSUER": "your-value",
        "OAUTH_AUDIENCE": "your-value",
        "OAUTH_JWKS_URI": "your-value",
        "OAUTH_REQUIRED_SCOPES": "your-value",
        "OTEL_ENABLED": "your-value",
        "OTEL_SERVICE_NAME": "your-value",
        "OTEL_EXPORTER_OTLP_ENDPOINT": "your-value",
        "TRACE_SAMPLE_RATE": "your-value"
      }
    }
  }
}

ターミナルでこれを実行します

claude mcp add easyeda-pro --env NODE_ENV=your-value --env LOG_LEVEL=your-value --env TOOL_PROFILE=your-value --env TOOL_SCOPES=your-value --env MCP_PROTOCOL_VERSION=your-value --env MCP_BRIDGE_BACKEND=your-value --env MCP_REMOTE_SESSION_ID=your-value --env TRANSPORT=your-value --env HTTP_HOST=your-value --env HTTP_PORT=your-value --env HTTP_AUTH_DISABLED=your-value --env HTTP_RATE_LIMIT_MAX=your-value --env CORS_ORIGIN=your-value --env ALLOWED_ORIGINS=your-value --env MCP_TASKS_ENABLED=your-value --env MCP_APPS_ENABLED=your-value --env MCP_SKILLS_ENABLED=your-value --env MCP_V2_EXPERIMENTAL=your-value --env MCP_RAW_EXEC_EXPERIMENTAL=your-value --env BRIDGE_HOST=your-value --env BRIDGE_PORT=your-value --env BRIDGE_PORT_SCAN=your-value --env BRIDGE_TIMEOUT_MS=your-value --env BRIDGE_HEARTBEAT_MS=your-value --env BRIDGE_WAIT_FOR_EDA_MS=your-value --env BRIDGE_MAX_PAYLOAD_SIZE=your-value --env BRIDGE_TOKEN=your-value --env EASYEDA_DEV_BRIDGE=your-value --env BRIDGE_RAW_EXEC_ENABLED=your-value --env DATA_DIR=your-value --env SQLITE_PATH=your-value --env ARTIFACT_DIR=your-value --env CACHE_DIR=your-value --env AI_PROVIDER=your-value --env AI_MODEL=your-value --env AI_API_KEY=your-value --env AI_MAX_TOKENS=your-value --env AI_TIMEOUT_MS=your-value --env AI_ALLOW_DESIGN_MUTATIONS=your-value --env JLCPCB_MODE=your-value --env JLCPCB_CLIENT_ID=your-value --env JLCPCB_CLIENT_SECRET=your-value --env JLCPCB_API_BASE_URL=your-value --env JLCPCB_ENABLE_ORDERING=your-value --env JLCSEARCH_ENABLED=your-value --env JLCSEARCH_BASE_URL=your-value --env LCSC_API_KEY=your-value --env KEYLESS_SOURCING_ENABLED=your-value --env SOURCING_CACHE_TTL_SECONDS=your-value --env VENDOR_MIN_REQUEST_INTERVAL_MS=your-value --env MOUSER_ENABLED=your-value --env MOUSER_API_KEY=your-value --env MOUSER_API_BASE_URL=your-value --env DIGIKEY_ENABLED=your-value --env DIGIKEY_CLIENT_ID=your-value --env DIGIKEY_CLIENT_SECRET=your-value --env DIGIKEY_SANDBOX=your-value --env DIGIKEY_LOCALE=your-value --env DIGIKEY_CURRENCY=your-value --env OAUTH_ENABLED=your-value --env OAUTH_ISSUER=your-value --env OAUTH_AUDIENCE=your-value --env OAUTH_JWKS_URI=your-value --env OAUTH_REQUIRED_SCOPES=your-value --env OTEL_ENABLED=your-value --env OTEL_SERVICE_NAME=your-value --env OTEL_EXPORTER_OTLP_ENDPOINT=your-value --env TRACE_SAMPLE_RATE=your-value -- npx -y easyeda-mcp-pro

動かす前に、空欄の値を入力してください。

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "easyeda-pro": {
      "command": "npx",
      "args": [
        "-y",
        "easyeda-mcp-pro"
      ],
      "env": {
        "NODE_ENV": "your-value",
        "LOG_LEVEL": "your-value",
        "TOOL_PROFILE": "your-value",
        "TOOL_SCOPES": "your-value",
        "MCP_PROTOCOL_VERSION": "your-value",
        "MCP_BRIDGE_BACKEND": "your-value",
        "MCP_REMOTE_SESSION_ID": "your-value",
        "TRANSPORT": "your-value",
        "HTTP_HOST": "your-value",
        "HTTP_PORT": "your-value",
        "HTTP_AUTH_DISABLED": "your-value",
        "HTTP_RATE_LIMIT_MAX": "your-value",
        "CORS_ORIGIN": "your-value",
        "ALLOWED_ORIGINS": "your-value",
        "MCP_TASKS_ENABLED": "your-value",
        "MCP_APPS_ENABLED": "your-value",
        "MCP_SKILLS_ENABLED": "your-value",
        "MCP_V2_EXPERIMENTAL": "your-value",
        "MCP_RAW_EXEC_EXPERIMENTAL": "your-value",
        "BRIDGE_HOST": "your-value",
        "BRIDGE_PORT": "your-value",
        "BRIDGE_PORT_SCAN": "your-value",
        "BRIDGE_TIMEOUT_MS": "your-value",
        "BRIDGE_HEARTBEAT_MS": "your-value",
        "BRIDGE_WAIT_FOR_EDA_MS": "your-value",
        "BRIDGE_MAX_PAYLOAD_SIZE": "your-value",
        "BRIDGE_TOKEN": "your-value",
        "EASYEDA_DEV_BRIDGE": "your-value",
        "BRIDGE_RAW_EXEC_ENABLED": "your-value",
        "DATA_DIR": "your-value",
        "SQLITE_PATH": "your-value",
        "ARTIFACT_DIR": "your-value",
        "CACHE_DIR": "your-value",
        "AI_PROVIDER": "your-value",
        "AI_MODEL": "your-value",
        "AI_API_KEY": "your-value",
        "AI_MAX_TOKENS": "your-value",
        "AI_TIMEOUT_MS": "your-value",
        "AI_ALLOW_DESIGN_MUTATIONS": "your-value",
        "JLCPCB_MODE": "your-value",
        "JLCPCB_CLIENT_ID": "your-value",
        "JLCPCB_CLIENT_SECRET": "your-value",
        "JLCPCB_API_BASE_URL": "your-value",
        "JLCPCB_ENABLE_ORDERING": "your-value",
        "JLCSEARCH_ENABLED": "your-value",
        "JLCSEARCH_BASE_URL": "your-value",
        "LCSC_API_KEY": "your-value",
        "KEYLESS_SOURCING_ENABLED": "your-value",
        "SOURCING_CACHE_TTL_SECONDS": "your-value",
        "VENDOR_MIN_REQUEST_INTERVAL_MS": "your-value",
        "MOUSER_ENABLED": "your-value",
        "MOUSER_API_KEY": "your-value",
        "MOUSER_API_BASE_URL": "your-value",
        "DIGIKEY_ENABLED": "your-value",
        "DIGIKEY_CLIENT_ID": "your-value",
        "DIGIKEY_CLIENT_SECRET": "your-value",
        "DIGIKEY_SANDBOX": "your-value",
        "DIGIKEY_LOCALE": "your-value",
        "DIGIKEY_CURRENCY": "your-value",
        "OAUTH_ENABLED": "your-value",
        "OAUTH_ISSUER": "your-value",
        "OAUTH_AUDIENCE": "your-value",
        "OAUTH_JWKS_URI": "your-value",
        "OAUTH_REQUIRED_SCOPES": "your-value",
        "OTEL_ENABLED": "your-value",
        "OTEL_SERVICE_NAME": "your-value",
        "OTEL_EXPORTER_OTLP_ENDPOINT": "your-value",
        "TRACE_SAMPLE_RATE": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "easyeda-pro": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "easyeda-mcp-pro"
      ],
      "env": {
        "NODE_ENV": "your-value",
        "LOG_LEVEL": "your-value",
        "TOOL_PROFILE": "your-value",
        "TOOL_SCOPES": "your-value",
        "MCP_PROTOCOL_VERSION": "your-value",
        "MCP_BRIDGE_BACKEND": "your-value",
        "MCP_REMOTE_SESSION_ID": "your-value",
        "TRANSPORT": "your-value",
        "HTTP_HOST": "your-value",
        "HTTP_PORT": "your-value",
        "HTTP_AUTH_DISABLED": "your-value",
        "HTTP_RATE_LIMIT_MAX": "your-value",
        "CORS_ORIGIN": "your-value",
        "ALLOWED_ORIGINS": "your-value",
        "MCP_TASKS_ENABLED": "your-value",
        "MCP_APPS_ENABLED": "your-value",
        "MCP_SKILLS_ENABLED": "your-value",
        "MCP_V2_EXPERIMENTAL": "your-value",
        "MCP_RAW_EXEC_EXPERIMENTAL": "your-value",
        "BRIDGE_HOST": "your-value",
        "BRIDGE_PORT": "your-value",
        "BRIDGE_PORT_SCAN": "your-value",
        "BRIDGE_TIMEOUT_MS": "your-value",
        "BRIDGE_HEARTBEAT_MS": "your-value",
        "BRIDGE_WAIT_FOR_EDA_MS": "your-value",
        "BRIDGE_MAX_PAYLOAD_SIZE": "your-value",
        "BRIDGE_TOKEN": "your-value",
        "EASYEDA_DEV_BRIDGE": "your-value",
        "BRIDGE_RAW_EXEC_ENABLED": "your-value",
        "DATA_DIR": "your-value",
        "SQLITE_PATH": "your-value",
        "ARTIFACT_DIR": "your-value",
        "CACHE_DIR": "your-value",
        "AI_PROVIDER": "your-value",
        "AI_MODEL": "your-value",
        "AI_API_KEY": "your-value",
        "AI_MAX_TOKENS": "your-value",
        "AI_TIMEOUT_MS": "your-value",
        "AI_ALLOW_DESIGN_MUTATIONS": "your-value",
        "JLCPCB_MODE": "your-value",
        "JLCPCB_CLIENT_ID": "your-value",
        "JLCPCB_CLIENT_SECRET": "your-value",
        "JLCPCB_API_BASE_URL": "your-value",
        "JLCPCB_ENABLE_ORDERING": "your-value",
        "JLCSEARCH_ENABLED": "your-value",
        "JLCSEARCH_BASE_URL": "your-value",
        "LCSC_API_KEY": "your-value",
        "KEYLESS_SOURCING_ENABLED": "your-value",
        "SOURCING_CACHE_TTL_SECONDS": "your-value",
        "VENDOR_MIN_REQUEST_INTERVAL_MS": "your-value",
        "MOUSER_ENABLED": "your-value",
        "MOUSER_API_KEY": "your-value",
        "MOUSER_API_BASE_URL": "your-value",
        "DIGIKEY_ENABLED": "your-value",
        "DIGIKEY_CLIENT_ID": "your-value",
        "DIGIKEY_CLIENT_SECRET": "your-value",
        "DIGIKEY_SANDBOX": "your-value",
        "DIGIKEY_LOCALE": "your-value",
        "DIGIKEY_CURRENCY": "your-value",
        "OAUTH_ENABLED": "your-value",
        "OAUTH_ISSUER": "your-value",
        "OAUTH_AUDIENCE": "your-value",
        "OAUTH_JWKS_URI": "your-value",
        "OAUTH_REQUIRED_SCOPES": "your-value",
        "OTEL_ENABLED": "your-value",
        "OTEL_SERVICE_NAME": "your-value",
        "OTEL_EXPORTER_OTLP_ENDPOINT": "your-value",
        "TRACE_SAMPLE_RATE": "your-value"
      }
    }
  }
}

これはパソコンで動くサーバーですが、ChatGPTがつなげるのはインターネット上のサーバーだけです。ほかのアプリを選んでください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

自分で入力する値

NODE_ENV env
Environment mode
LOG_LEVEL env
Pino log level
TOOL_PROFILE env
Active tool profile (core, pro, full, dev, experimental)
TOOL_SCOPES env
Optional comma- or space-separated capability scope allowlist; empty enables all scopes allowed by the active tool profile.
MCP_PROTOCOL_VERSION env
MCP protocol version string
MCP_BRIDGE_BACKEND env
Bridge backend: local_bridge or experimental remote_relay
MCP_REMOTE_SESSION_ID env
Optional fixed Remote Relay session id for the remote_relay backend
TRANSPORT env
Server transport mode (stdio or http)
HTTP_HOST env
HTTP bind address
HTTP_PORT env
HTTP port
HTTP_AUTH_DISABLED env
Disable HTTP transport authentication
HTTP_RATE_LIMIT_MAX env
Max requests per minute per IP
CORS_ORIGIN env
Allowed CORS origin for HTTP transport
ALLOWED_ORIGINS env
Comma-separated list of allowed origins for HTTP transport (use * for wildcard)
MCP_TASKS_ENABLED env
Reserved; currently non-functional: parsed for compatibility, but the server does not advertise or execute MCP Tasks.
MCP_APPS_ENABLED env
Experimental; enables sandboxed read-only MCP Apps project review UI; off by default.
MCP_SKILLS_ENABLED env
Experimental; serves packaged read-oriented Skills over MCP; off by default.
MCP_V2_EXPERIMENTAL env
Experimental; enables opt-in dual-era HTTP and stdio support for MCP 2026-07-28 while legacy behavior remains the default.
MCP_RAW_EXEC_EXPERIMENTAL env
Experimental second gate for raw EasyEDA runtime execution; requires BRIDGE_RAW_EXEC_ENABLED.
BRIDGE_HOST env
Bridge WebSocket host for EasyEDA Pro connection
BRIDGE_PORT env
Bridge primary port
BRIDGE_PORT_SCAN env
Port scan specification (comma-separated ports or ranges)
BRIDGE_TIMEOUT_MS env
Bridge call timeout in ms
BRIDGE_HEARTBEAT_MS env
Bridge heartbeat interval in ms
BRIDGE_WAIT_FOR_EDA_MS env
How long to wait for EasyEDA Pro to become available on startup (ms)
BRIDGE_MAX_PAYLOAD_SIZE env
Max bridge payload size in bytes
BRIDGE_TOKEN 秘密 env
Session token for extension auth
EASYEDA_DEV_BRIDGE env
Enable EasyEDA dev bridge mode
BRIDGE_RAW_EXEC_ENABLED env
Experimental first gate for raw EasyEDA runtime execution; requires MCP_RAW_EXEC_EXPERIMENTAL.
DATA_DIR env
Base directory for writable local state; defaults beneath the operating-system user home directory.
SQLITE_PATH env
SQLite database path; derived from DATA_DIR unless explicitly configured.
ARTIFACT_DIR env
Artifact export directory; derived from DATA_DIR unless explicitly configured.
CACHE_DIR env
Cache directory; derived from DATA_DIR unless explicitly configured.
AI_PROVIDER env
Reserved; currently non-functional: no in-process AI provider client is invoked.
AI_MODEL env
Reserved; currently non-functional: no model is selected or invoked.
AI_API_KEY 秘密 env
Reserved; currently non-functional: do not supply credentials because no provider client consumes them.
AI_MAX_TOKENS env
Reserved; currently non-functional: retained only for future provider compatibility.
AI_TIMEOUT_MS env
Reserved; currently non-functional: retained only for future provider compatibility.
AI_ALLOW_DESIGN_MUTATIONS env
Reserved; currently non-functional: cannot enable AI-originated design mutation.
JLCPCB_MODE env
JLCPCB API mode (disabled, mock, approved_api)
JLCPCB_CLIENT_ID env
JLCPCB API client identifier.
JLCPCB_CLIENT_SECRET 秘密 env
JLCPCB API client secret
JLCPCB_API_BASE_URL env
JLCPCB API base URL
JLCPCB_ENABLE_ORDERING env
Enable JLCPCB ordering
JLCSEARCH_ENABLED env
Enable LCSC component search
JLCSEARCH_BASE_URL env
LCSC search API base URL
LCSC_API_KEY 秘密 env
LCSC API key
KEYLESS_SOURCING_ENABLED env
Allow supported public keyless component-sourcing fallbacks when vendor credentials are unavailable.
SOURCING_CACHE_TTL_SECONDS env
Component-sourcing cache lifetime in seconds (0 disables cache reuse).
VENDOR_MIN_REQUEST_INTERVAL_MS env
Minimum delay in milliseconds between outbound requests to the same sourcing vendor.
MOUSER_ENABLED env
Enable Mouser integration
MOUSER_API_KEY 秘密 env
Mouser API key
MOUSER_API_BASE_URL env
Mouser API base URL
DIGIKEY_ENABLED env
Enable DigiKey integration
DIGIKEY_CLIENT_ID env
DigiKey OAuth2 client identifier.
DIGIKEY_CLIENT_SECRET 秘密 env
DigiKey OAuth2 client secret
DIGIKEY_SANDBOX env
Use DigiKey sandbox environment
DIGIKEY_LOCALE env
DigiKey locale
DIGIKEY_CURRENCY env
DigiKey pricing currency
OAUTH_ENABLED env
Enable OAuth for HTTP mode
OAUTH_ISSUER env
Expected OAuth token issuer
OAUTH_AUDIENCE env
Expected OAuth token audience
OAUTH_JWKS_URI env
JWKS endpoint for token signature validation
OAUTH_REQUIRED_SCOPES env
Required OAuth token scope
OTEL_ENABLED env
Reserved; currently non-functional: no OTLP exporter is started.
OTEL_SERVICE_NAME env
Reserved; currently non-functional: retained for a future OTLP exporter.
OTEL_EXPORTER_OTLP_ENDPOINT env
Reserved; currently non-functional: retained for a future OTLP exporter.
TRACE_SAMPLE_RATE env
Reserved; currently non-functional: no OTLP traces are emitted.

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

✓ 合格
作者とリポジトリが一致
レジストリ名は、リポジトリを所有するGitHubアカウント oaslananka で確認済みです
… 未チェック
今もメンテナンスされている
このリポジトリはまだGitHubから読み取っていません
… 未チェック
ライセンスがある
このリポジトリはまだGitHubから読み取っていません
– 対象外
エンドポイントが応答する
これはパソコンで動くため、インターネット上のエンドポイントはありません
– 対象外
OAuthでサインイン
パソコンで動き、代わりにローカルの設定を使います
… 未チェック
ツールの説明に隠れた指示がない
パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

その他のほかのサーバーとの比較i

このカテゴリのほかの18431件のうち0%よりスターが多い
このカテゴリのほかの18431件のうち98%より最近レジストリに公開
基本チェックの結果が、このカテゴリのほかの18431件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Easyeda MCP Proは安全ですか？

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか？

入力が必要なもの：BRIDGE_TOKEN, AI_API_KEY, JLCPCB_CLIENT_SECRET, LCSC_API_KEY, MOUSER_API_KEY, DIGIKEY_CLIENT_SECRET

パソコンで動きますか、それともクラウドですか？

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません（サーバー自体がオンラインサービスを呼び出す場合を除きます）。

今もメンテナンスされていますか？

GitHubリポジトリの最終更新は–、最新バージョン（1.11.0）がレジストリに届いたのは昨日です。

どのアプリで使えますか？

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにNode.jsも必要です。

代わりに使えるものは？

同じカテゴリには：Spec Driven Development, Remote Desktop Commander, Filesystem MCP

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方：★ GitHubスターi3つの柱：レビュー · チェック · 利用状況i更新＝最新バージョンをレジストリに公開した日i

Spec Driven Development

作者：formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

パソコンで動く★ 440MIT14 か月前更新

インストール

Remote Desktop Commander

作者：desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 2113 日前更新

インストール

Filesystem MCP

作者：j0hanz

Filesystem MCP server for AI assistants.

パソコンで動く今日更新

インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

EasyEDA MCP Pro

Inspect, review, and safely automate EasyEDA Pro designs from MCP-compatible AI assistants.

Documentation · Getting Started · Tool Reference · Compatibility · Roadmap · DeepWiki

Trust and Supply Chain

easyeda-mcp-pro keeps historical OpenSSF Best Practices evidence in docs/OPENSSF_BEST_PRACTICES.md and its security assurance case in docs/SECURITY_ASSURANCE_CASE.md. The header badges link to current workflow-backed signals only: CI, generated docs deployment, the project security policy, and the OpenSSF Scorecard. Release integrity evidence (npm provenance, signed-release status) is tracked in docs/RELEASE_VERIFICATION.md. Coverage, Test Analytics, and extension bundle monitoring are documented in docs/CODECOV_ANALYTICS.md.

Licensing note: current repository source is MIT-licensed. Commercial use is permitted under MIT; historical releases retain the license notices shipped with them.

More project references: OpenSSF evidence · Security assurance · Third-party notices · Vendor terms · Remote MCP modes

Support development: Buy me a coffee · Star on GitHub

Quick Start

The fastest way to install and configure easyeda-mcp-pro for your favorite AI assistant or IDE:

Auto-configure your MCP client:

   npx easyeda-mcp-pro setup all

_This detects and configures Claude Desktop, Cursor, VS Code, Windsurf, Cline, Gemini, Zed, etc. to run the MCP server automatically._ _(Or run for a specific client, e.g., npx easyeda-mcp-pro setup claude)_

Locate and install the EasyEDA Pro bridge extension:

   npx easyeda-mcp-pro extension --open

_This opens the folder containing the extension package easyeda-bridge-extension.eext. Import it via EasyEDA Pro → Settings → Extensions → Extension Manager._

Connect the bridge: In EasyEDA Pro, click MCP Bridge → Connect in the menu bar. On EasyEDA Web, Local also works with the server on the same PC. For a separate self-hosted gateway, use MCP Bridge → Connect Custom Remote... (Experimental) with its secure WSS Relay address and one-time EDA-XXXXXXXX pairing code; this is not the public HTTP /mcp URL. Details.

For advanced configurations, manual instructions, and specific clients, see Installation & Client Configuration.

Overview

easyeda-mcp-pro is a Model Context Protocol (MCP) server that bridges AI assistants with hardware design workflows in EasyEDA Pro. It exposes 126 profile-gated MCP tools for schematic inspection and editing, controlled EasyEDA Pro API calls, Personal Device metadata, BOM management, design rule checks, PCB board analysis, fabrication exports, diagnostics, and supplier integration.

The server connects to EasyEDA Pro via a WebSocket bridge extension, enabling real-time access to open project data. It integrates with JLCPCB, LCSC, Mouser, and DigiKey for BOM sourcing and pricing.

Key Capabilities

Area	What you can do
Schematic	List nets/components, search and place devices, edit wires/primitives
BOM	Generate, validate, export, and source bill of materials
DRC/ERC	Run design rule and electrical rule checks
Board	Inspect layers, stackup, dimensions, features
Export	Export Gerbers, pick-and-place, PDF, netlist
Diagnostics	Health check, bridge status, API inventory, capabilities, self-test

Prerequisites

Node.js: Node.js 24.x is required; repository automation is pinned to 24.22.1.
pnpm: local development and automation require exactly 11.28.8.

Prepare the supported runtime before installing dependencies:

nvm install 24.22.1

nvm use 24.22.1 corepack enable corepack prepare pnpm@11.28.8 --activate node scripts/check-runtime.mjs --require-pnpm

EasyEDA Pro with the bundled bridge extension installed and running
For supplier integration: API credentials from JLCPCB, LCSC, Mouser, or DigiKey

Installation & Client Configuration

Stable v1 is published. If you are upgrading from a pre-v1 release, follow Migrating to v1.

You can configure easyeda-mcp-pro automatically or manually.

1. Automatic Configuration (CLI)

The CLI setup automates editing the configuration files for your client:

# Configure all detected clients automatically

npx easyeda-mcp-pro setup all

Or configure a specific client

npx easyeda-mcp-pro setup

Supported Client Keys:

claude (Claude Desktop)
cursor (Cursor IDE)
vscode (VS Code Copilot)
windsurf (Windsurf)
cline (Cline)
gemini (Gemini CLI / Antigravity)
zed (Zed Editor)
amazonq (Amazon Q Developer)
continue (Continue.dev)

Options:

--profile : Specify the tool profile. Options: core (default), pro, full, dev. Example: npx easyeda-mcp-pro setup cursor --profile full

2. Extension Installation

To bridge the MCP server with EasyEDA Pro:

# Open the directory containing the .eext extension package in your file manager

npx easyeda-mcp-pro extension --open

Or copy it to a specific directory

npx easyeda-mcp-pro extension --copy /path/to/destination

Installation steps in EasyEDA Pro:

Open EasyEDA Pro.
Go to Settings → Extensions → Extension Manager.
Click Import Extension and select the easyeda-bridge-extension.eext file.
Ensure Allow External Interaction is enabled for the extension.
Fully quit and reopen EasyEDA Pro after each import or upgrade. Extension Manager's success message confirms the installed package, not replacement of a dispatcher already running in memory.
Click MCP Bridge → Connect, then MCP Bridge → Status to see the running dispatcher build ID. A reconnect or extension disable/enable alone does not activate an imported update. For version-sensitive operations, verify the active build against your intended package before trusting the new behavior.

3. Manual Client Configurations

If you prefer to configure your clients manually, add the following configuration to the respective settings files:

🟣 Claude Desktop

Config Path:

Windows: %APPDATA%\Claude\claude_desktop_config.json
macOS: ~/Library/Application Support/Claude/claude_desktop_config.json
Linux: ~/.config/Claude/claude_desktop_config.json

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "core" } } } }

🔵 Cursor IDE

Config Path: Project-specific .cursor/mcp.json or global ~/.cursor/mcp.json

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "pro" } } } }

🟢 VS Code (GitHub Copilot)

Config Path: %APPDATA%\Code\User\mcp.json (Windows), ~/Library/Application Support/Code/User/mcp.json (macOS), or ~/.config/Code/User/mcp.json (Linux)

"servers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "pro" } } } }

🏄 Windsurf (Codeium)

Config Path: ~/.codeium/windsurf/mcp_config.json

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "pro" } } } }

🤖 Cline

Config Path: Cline VS Code extension global storage (cline_mcp_settings.json)

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "pro" }, "disabled": false, "autoApprove": [] } } }

✨ Gemini CLI / Antigravity

Config Path: ~/.gemini/settings.json or ~/.gemini/config/mcp_config.json

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "pro" } } } }

⚡ Zed Editor

Config Path: ~/.config/zed/settings.json

"context_servers": { "easyeda-mcp-pro": { "command": { "path": "npx", "args": ["-y", "easyeda-mcp-pro@latest"] }, "settings": {} } } }

🔄 Continue.dev

Config Path: ~/.continue/config.json

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": { "TOOL_PROFILE": "pro" } } } }

👑 Amazon Q Developer

Config Path: ~/.aws/amazonq/mcp.json

"mcpServers": { "easyeda-mcp-pro": { "command": "npx", "args": ["-y", "easyeda-mcp-pro@latest"], "env": {

冒頭だけを表示しています。続きはリポジトリで読めます

Easyeda MCP Pro

概要

PopNx MCPの3つの柱

できること

インストール

インストールの前に

自分で入力する値

できること

基本チェックi

作者とリポジトリが一致

今もメンテナンスされている

ライセンスがある

エンドポイントが応答する

OAuthでサインイン

ツールの説明に隠れた指示がない

その他のほかのサーバーとの比較i

よくある質問

代わりの候補

Spec Driven Development

Remote Desktop Commander

Filesystem MCP

作者のREADME

EasyEDA MCP Pro

Trust and Supply Chain

Quick Start

Overview

Key Capabilities

Prerequisites

Installation & Client Configuration

1. Automatic Configuration (CLI)

Or configure a specific client

Supported Client Keys:

Options:

2. Extension Installation

Or copy it to a specific directory

3. Manual Client Configurations