プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Governance Gateway

作者:tanishq-ctrlバージョン 0.1.1i★ –iパソコンで動く
レジストリ名io.github.tanishq-ctrl/governance-gateway

インストール

概要

作者による説明(英語の原文)

Deadline-aware governance for AI agents: PII scan always, safety check if it fits the deadline

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: パソコンで動く
  • トランスポート: stdio
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

  • 基本チェック:1項目中1項目に合格
  • あなたのパソコンで、あなたのユーザーと同じ権限(ファイル、ネットワーク、アプリ)で動きます。
  • レジストリには、入力が必要なキーは載っていません。

必要なもの

  • PyPIPythonのuvのインストール(uvxコマンドに必要)

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

Claude Desktop → Settings → Developer → Edit Config を開き、claude_desktop_config.json にこれを貼り付けます

{
  "mcpServers": {
    "governance-gateway": {
      "command": "uvx",
      "args": [
        "governance-gateway"
      ]
    }
  }
}

ターミナルでこれを実行します

claude mcp add governance-gateway -- uvx governance-gateway

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "governance-gateway": {
      "command": "uvx",
      "args": [
        "governance-gateway"
      ]
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "governance-gateway": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "governance-gateway"
      ]
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

これはパソコンで動くサーバーですが、ChatGPTがつなげるのはインターネット上のサーバーだけです。ほかのアプリを選んでください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

パソコンで動くサーバーです。インストールすると、ツール一覧がAIアプリに表示されます。

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント tanishq-ctrl で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • – 対象外

    エンドポイントが応答する

    これはパソコンで動くため、インターネット上のエンドポイントはありません

  • – 対象外

    OAuthでサインイン

    パソコンで動き、代わりにローカルの設定を使います

  • … 未チェック

    ツールの説明に隠れた指示がない

    パソコンで動くサーバーです。ツール一覧を読み取れるのは、インターネット上のエンドポイントがある場合だけです

その他のほかのサーバーとの比較i

  • このカテゴリのほかの18354件のうち0%よりスターが多い
  • このカテゴリのほかの18354件のうち78%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの18354件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Governance Gatewayは安全ですか?

当てはまる基本チェック1項目のうち1項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

あなたのパソコンで動きます。必要なときにAIアプリが起動し、データは作者のサーバーを通りません(サーバー自体がオンラインサービスを呼び出す場合を除きます)。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.1.1)がレジストリに届いたのは11 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。パソコンにPython (uv)も必要です。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Qemu MCP

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

Qemu MCP

作者:0xmortuex

Boot and drive QEMU VMs from an AI agent: keys, screenshots, serial. No guest agent.

パソコンで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

governance-gateway

Governance checks that an AI agent runs before it acts, built so they keep up with the agent instead of falling behind it.

Every request gets a format check and a personal-data (PII) scan, which never skip. A safety classifier, which flags toxic text and jailbreak attempts, is the slow, optional check: it runs only if a cheap screen finds the text suspicious and it can still finish before the request's deadline. Under load, a guardrail that checks everything falls behind and its checks finish after the agent has already acted; this one stays on time and never drops the privacy check.

It runs locally as an MCP server, so text never leaves your machine, and works with any MCP client: Claude Desktop, Claude Code, Cursor, VS Code, Gemini CLI and others. In Claude Code an optional hook makes the checks compulsory for every command, file write and web request the agent makes.

Install

With uv nothing needs installing in advance:

uvx governance-gateway --version

Or with pip: pip install governance-gateway, then run governance-gateway. Python 3.10 or later; the only dependency is the mcp package.

Add it to your AI tool

Claude Desktop: in claude_desktop_config.json (Settings > Developer > Edit Config):

{

"mcpServers": { "governance-gateway": { "command": "uvx", "args": ["governance-gateway"] } } }

Cursor: the same block in ~/.cursor/mcp.json (or .cursor/mcp.json in a project).

Gemini CLI: the same block in ~/.gemini/settings.json.

VS Code (Copilot agent mode): in .vscode/mcp.json:

{

"servers": { "governance-gateway": { "type": "stdio", "command": "uvx", "args": ["governance-gateway"] } } }

Claude Code:

claude mcp add governance-gateway -- uvx governance-gateway

If you installed with pip, use "command": "governance-gateway" and no args.

Tools

ToolWhat it does
check_message(text, deadline_ms=100)Runs the checks. Returns allow, redact (with the personal data masked) or block, the reasons, whether the screen and the classifier ran, and the timing. Never echoes the text back.
governance_status()Requests so far: verdicts, mean and 95th-percentile lag, share on time, share of classifier checks skipped or screened out.
recent_decisions(limit=20)The latest decisions: verdict, kinds of personal data found, timing. No text.
decision_matrix(...)For a pipeline's deadline, traffic shape, peak-hour factor, detector recall, target and cost share: whether checking everything is enough, adaptive checking is needed, or only more capacity helps.
simulate_load(load, deadline_ms, traffic, seconds)Races "check everything" against the deadline-aware guard on a simulated clock with measured check costs.

Resources: governance://status and governance://policy (which checks run, which are mandatory, and how the gateway decides). All tools are read-only.

Make the checks compulsory in Claude Code

An MCP tool is only called when the agent decides to call it. In Claude Code a PreToolUse hook can run the check before every action instead. The easiest way is the governance-guard plugin, which adds both the server and the hook:

/plugin marketplace add tanishq-ctrl/governance-gateway

/plugin install governance-guard@governance-gateway

Or add the hook yourself to ~/.claude/settings.json (or a project's .claude/settings.json):

{

"hooks": { "PreToolUse": [ { "matcher": "Bash|Write|Edit|MultiEdit|NotebookEdit|WebFetch", "hooks": [ { "type": "command", "command": "uvx", "args": ["--from", "governance-gateway", "governance-gateway-hook"], "timeout": 10, "onFailure": "block" } ] } ] } }

The hook sends the text of each action (the command, the file content, the URL) to the running gateway, with a budget of GSL_HOOK_DEADLINE_MS (default 200 ms):

  • harmful or malformed: the action is refused and the agent is told why;
  • personal data found: you are asked whether to allow it;
  • otherwise: nothing changes, and your normal permissions apply.

If the gateway is not running, the hook still runs the personal-data scan itself. If the check cannot run at all, the action is blocked (set GSL_FAIL_OPEN=1 to allow it instead). Addresses at GSL_ALLOW_EMAIL_DOMAINS (default anthropic.com, users.noreply.github.com, example.com) are ignored, so commit trailers pass.

Settings

OptionEnvironmentDefaultMeaning
--cascade on/offGSL_CASCADEonRun the suspicion screen before the classifier
--estimator p90/meanGSL_ESTIMATORp90How the classifier's cost is estimated from recent checks
--workers NGSL_GATEWAY_WORKERS1Workers serving the queue
--audit-log PATHGSL_AUDIT_LOGnoneAppend one JSON line per decision (no text)
--port NGSL_GATEWAY_PORT8737Local port for the hook (127.0.0.1 only)
--no-hook-endpointDo not open the local port

What it detects, and what it does not

  • Personal data: e-mail addresses, telephone numbers and US-style national ID numbers, by pattern. Names, postal addresses and other identifiers are not detected.
  • Harmful text: a TF-IDF and logistic-regression classifier trained on ToxicChat, real prompts to a public chatbot labelled by people. On held-out ToxicChat messages it catches about 6 in 10 harmful messages with a precision of about 0.78; it is a light first line of defence, not a complete safety system, and it was trained on English.
  • The screen passes on 95% of harmful messages in validation and sends about 31% of ordinary traffic to the classifier.

Use it alongside, not instead of, your organisation's own data-protection controls.

Background

The gateway comes from an MSc project that measured how far governance checks fall behind fast automated decisions as load grows. Checking everything collapses at full capacity: on real chatbot traffic it stopped meeting its target at 77% of capacity. The deadline rule held to 1.06, and the screen plus the deadline rule to 1.44, while keeping the privacy check on time.

Prabhu, T. S. (2026). *Quantifying "Governance Speed Lag" (GSL) in Agentic AI Ecosystems: A simulation-based framework for self-adaptive real-time data compliance.* MSc Data Science project, VIT.

Source and issues

https://github.com/tanishq-ctrl/governance-gateway

Licence

Code: MIT. The bundled models and workload data are derived from ToxicChat and are for non-commercial use only (CC BY-NC 4.0); see LICENSE-DATA.md.

PopNxに聞く