プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Aviation & Space Weather Data (Tanod)

作者:tanod.devバージョン 0.1.1i★ –iクラウドで動く
レジストリ名dev.tanod/sky

インストール

概要

作者による説明(英語の原文)

Flight and sky conditions for agents, from METAR/TAF and airports to aurora and satellite passes.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://tanod.dev/mcp/sky

ターミナルでこれを実行します

claude mcp add --transport http sky https://tanod.dev/mcp/sky

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "sky": {
      "url": "https://tanod.dev/mcp/sky"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "sky": {
      "type": "http",
      "url": "https://tanod.dev/mcp/sky"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://tanod.dev/mcp/sky

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • get_metar

    skypeek: Get current METAR airport weather reports. For forecasts use get_taf; to decode a report you hold use decode_metar_taf. Returns the latest METAR for 1-20 ICAO stations, raw and decoded, with the station name, position and observation time; a station without a current rep

  • get_taf

    skypeek: Get current TAF airport weather forecasts. For current observations use get_metar. Returns the current TAF for 1-20 ICAO stations, raw and decoded per forecast period (BASE, FM, TEMPO, BECMG, PROB) with wind, visibility, weather, clouds and flight category, plus issue an

  • decode_metar_taf

    skypeek: Decode a METAR or TAF weather report. To fetch the latest report use get_metar. Returns one METAR or TAF report you paste, decoded into wind, visibility, weather, clouds, temperature and dew point, altimeter and the flight category (VFR / MVFR / IFR / LIFR) (TAF: each fo

  • lookup_airport

    skypeek: Look up an airport by ICAO or IATA code or by name. For the distance between two use airport_distance. Returns an airport by ICAO, IATA or ident code (with runways: ends, length, width, surface, lighting, true headings; and radio frequencies), or up to 20 matches of a na

  • get_airport_delays

    skypeek: Airport delays: FAA ground stops, delay programs and closures at US airports right now. For airport data use lookup_airport. Returns live FAA airport status for the US: ground stops, ground delay programs (average and maximum delay), closures, arrival and departure delay

  • airport_distance

    skypeek: Calculate the great-circle distance between two airports or points. For airport details use lookup_airport. Returns the great-circle distance between two airports (by code) or coordinates, in km, nautical miles and statute miles, with the initial and final true bearings

  • get_space_weather

    skypeek: Get space weather: Kp index, forecast, solar wind, alerts. For aurora at a place use aurora_forecast. Returns current space weather: the planetary Kp index with its NOAA G-scale level, the Kp forecast for the next days (3-hour steps), solar-wind speed and magnetic field

  • aurora_forecast

    skypeek: Aurora forecast: the chance of visible aurora at a location in the next 30-90 minutes. For Kp and solar wind use get_space_weather. Returns the chance (0 to 100 percent) of visible aurora overhead at a point from NOAA SWPC's OVATION model for the next 30-90 minutes, with

  • asteroid_close_approaches

    skypeek: List asteroid and comet close approaches to Earth. For space weather use get_space_weather. Returns near-Earth object close approaches to Earth in the next 1-30 days within a miss distance (default 0.05 au, about 19.5 lunar distances): designation, approach time, nominal

  • sun_moon_times

    skypeek: Get sunrise, sunset, twilight, moonrise and moon phase for a place and date. For satellite passes use satellite_passes. Returns sunrise, sunset, solar noon, day length and civil / nautical / astronomical twilight, plus moonrise, moonset, moon phase, illumination and dist

  • satellite_passes

    skypeek: Predict satellite passes over a location. For sun and moon times use sun_moon_times. Returns the passes of a satellite (default the ISS) over a point in the next 1-3 days: start, highest and end times with azimuth and elevation, duration, and whether the pass is visible

  • get_satellite_image

    skypeek: Get a recent satellite image of a place or coordinates. For the forecast use get_weather. Returns a recent satellite picture of a place as a base64 PNG, with the capture date, cloud cover, source and attribution: the least cloudy recent Sentinel-2 L2A scene at 10 m per p

  • get_weather

    weatherpeek: hourly weather forecast for a point or a city. For airport observations use get_metar. Input: either `lat` and `lon` together, or `place` alone, plus optional `hours`. `place` matches cities of 15,000+ people offline ("City" or "City, CC" with an ISO country code); n

  • geocode

    utilpeek: offline geocoding over the GeoNames cities15000 table. For places of a kind nearby use find_places_nearby. Input: either `place` alone or `lat` and `lon` together. `place` matches cities of 15,000+ people offline ("City" or "City, CC" with an ISO country code or a US st

  • find_places_nearby

    utilpeek: Find places nearby: pharmacies, cafes, ATMs, shops and hospitals near a point, from OpenStreetMap. To resolve a city name use geocode. Returns places of one kind (pharmacy, cafe, supermarket, ATM, hospital, clinic, bicycle or hardware shop, fuel, EV charging and more) w

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ! 注意

    作者とリポジトリが一致

    レジストリにソースのリポジトリが載っていないため、公開者(tanod.dev)とコードを照合できません

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    701ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    15件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32466件のうち0%よりスターが多い
  • このカテゴリのほかの32466件のうち91%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32466件のうち37%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Aviation & Space Weather Data (Tanod)は安全ですか?

当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.1.1)がレジストリに届いたのは3 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, HotCodePush

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

HotCodePush

作者:hotcodepush-team

Manage over-the-air (OTA) updates for React Native, Expo, Capacitor and Cordova apps.

クラウドで動く今日更新
インストール

作者のREADME

リポジトリにREADMEが見つかりません

PopNxに聞く