プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

McpStamp Leave Tracker

作者:theluckystrikeバージョン 0.23.0i★ –iパソコンでもクラウドでも
レジストリ名io.github.theluckystrike/leave

インストール

概要

作者による説明(英語の原文)

Employee leave and PTO: requests, approvals, balances, who is out, and conflict checks.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: パソコンでもクラウドでも
  • トランスポート: stdio, Streamable HTTP
  • カテゴリ: その他
  • 入力が必要なもの:MCP_LICENSE_KEY

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

「秘密」と表示された値は、あなたのアカウントの鍵です。絶対に人に教えたり、チャットに貼り付けたりしないでください。

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://mcp.zovo.one/mcp/leave

作者の .mcpb ファイルをダウンロード

リンク先は作者自身のファイルです。私たちが置いたり再パッケージしたりしたものではありません。ファイルを開くと、Claude Desktopがインストールします。

ターミナルでこれを実行します

claude mcp add --transport http leave https://mcp.zovo.one/mcp/leave

動かす前に、空欄の値を入力してください。

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "leave": {
      "url": "https://mcp.zovo.one/mcp/leave"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "leave": {
      "type": "http",
      "url": "https://mcp.zovo.one/mcp/leave"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://mcp.zovo.one/mcp/leave

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

自分で入力する値

  • MCP_LICENSE_KEY 秘密 env
    Optional Pro license key (MCPL1....). Verified offline.

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • leave_employee_add

    Add an employee to the leave tracker and return their EMP-NNNN id. Give their annual paid-leave allowance in whole days and any days carried over from last year. Balances charge approved plus pending leave against allowance + carried-over. Free tier: unlimited.

  • leave_request

    Create a leave or PTO request and return its LV-NNNN id. type is vacation, sick, unpaid or parental. start and end are inclusive YYYY-MM-DD dates; halfDay charges half a day for the whole span. A pending request is refussed if it would overlap another approved or pending request

  • leave_approve

    Approve a pending leave request by id. Also used to re-open a rejected one. Nothing to approve on an already-approved request.

  • leave_reject

    Reject or cancel a leave request by id. A pending or approved request becomes rejected; a rejected one can be reopened via leave_approve. Use leave_cancel (via reject with reason) for voluntary withdrawal.

  • leave_balance

    Show one employee's leave balance: allowance + carried-over, minus approved and pending, as whole days plus a possible half day. Remaining is rounded down to whole days on the report.

  • leave_out_range

    Who is out in a date range: start and end are inclusive YYYY-MM-DD. Each employee appears once per day; pending requests count as a plan. Use for coverage, calendars and absence summaries. Free tier: unlimited.

  • leave_list

    List all employees, or all leave requests (optionally filtered by employee and/or status). Omit the filter to list requests.

  • leave_import

    Pro. Bulk-create leave requests from a CSV/TSV. First row is a header: employee,type,start,end,halfDay,status,reason. status may be omitted (defaults to pending) or be approved/rejected. Each request is still checked for overlap conflicts; a conflicting row is reported, not appli

  • leave_export_ics

    Pro. Export all APPROVED leave as an .ics calendar (RFC5545). Returns the calendar text; pass path to also write it to a local file. watermark-free.

  • license_status

    Report this endpoint's licence state for your token as JSON: the product, the tier free or pro, why it is not Pro, and the checkout URL. Call it to explain a free-tier refusal. No arguments, nothing changes.

  • license_activate

    Turn Pro on for this connection with key, an MCPL1. . issued at checkout for this server or the bundle. Data under your token stays; a wrong or expired key changes nothing. license_status confirms it.

  • leave_cancel

    Cancel a pending or approved request by id, keeping its record with status cancelled. Differs from leave_reject in intent (voluntary withdrawal). Nothing happened if already cancelled.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント theluckystrike で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    35ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    12件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32700件のうち0%よりスターが多い
  • このカテゴリのほかの32700件のうち86%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32700件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

McpStamp Leave Trackerは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

入力が必要なもの:MCP_LICENSE_KEY

パソコンで動きますか、それともクラウドですか?

どちらでも使えます。パソコンにインストールしても、クラウド版につないでもかまいません。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.23.0)がレジストリに届いたのは5 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Agent Data Tools: Utilities

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

mcp-leave

In the [official MCP Registry](https://registry.modelcontextprotocol.io/v0.1/servers/io.github.theluckystrike%2Fleave/versions/latest) (io.github.theluckystrike/leave). Employee leave/PTO tracking for solopreneurs and small studios: who is off, when, and how many days each person has left. Add employees with an annual allowance and any carried-over days, log vacation/sick/personal requests (including half-days), approve or reject them, and read balances, conflicts and who-is-out calendars directly from your MCP client - Claude Desktop, Cursor, or any MCP host.

Tools

  • "leave_employee_add" - add an employee with annualAllowance (and optional carriedOver).
  • "leave_request" - log a leave request (employee, type, start, end, optional halfDay, reason).
  • "leave_approve" / "leave_reject" - decide a request; decisions are recorded with dates.
  • "leave_cancel" - cancel a pending or approved request (keeps the audit trail).
  • "leave_balance" - allowance, carried, approved, pending, committed and remaining days per employee.
  • "leave_out_range" - who is out in a date range: day-by-day calendar rows plus person-days.
  • "leave_list" - all employees and requests, filterable by employee and status.
  • "leave_import" (Pro) - bulk-create requests from CSV; conflicting rows are rejected one by one, valid rows still apply.
  • "leave_export_ics" (Pro) - export approved leave as an RFC5545 .ics calendar.

The one rule that decides everything else

A day is committed when the request that spends it is approved or pending. Balance is allowance + carried − approved − pending. Cancelling returns the days immediately; rejecting never charged them.

Overlapping requests for the same person are refused at creation time - both pending and approved count - so the calendar never contains two requests claiming the same day.

Free vs Pro

The free tier is the full CRUD surface: employees, requests, approvals, balances, calendars - watermark-free, no request limits. Pro (an MCP_LICENSE_KEY, activate with "license_activate") adds bulk CSV import and ICS calendar export. Run "license_status" to see the current tier.

Quick start

{

"mcpServers": { "leave": { "command": "npx", "args": ["-y", "@theluckystrike/mcp-leave"] } } }

Data lives in a single JSON store (~/.mcp-leave/store.json, or $XDG_DATA_HOME/mcp-servers/leave/store.json when set), written atomically under a file lock, so two clients on one machine never interleave writes.

Use these docs as an MCP server

Any MCP client (Claude, Cursor, Windsurf, VS Code) can read this repository's documentation directly via GitMCP - no install:

  • Docs MCP URL: https://gitmcp.io/theluckystrike/mcp-leave
PopNxに聞く