プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

TrueProxies

作者:trueproxies-comバージョン 1.0.5i★ –iクラウドで動く
レジストリ名com.trueproxies/mcp

インストール

概要

作者による説明(英語の原文)

Plans, services, usage, invoices, endpoints and connection checks for your TrueProxies account

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他
  • 入力が必要なもの:Authorization

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

「秘密」と表示された値は、あなたのアカウントの鍵です。絶対に人に教えたり、チャットに貼り付けたりしないでください。

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

このアドレスはリクエストの header にキーが必要ですが、コネクタを追加するメニューでは設定できません。代わりにClaude Code、Cursor、VS Codeを使ってください。

ターミナルでこれを実行します

claude mcp add --transport http trueproxies https://mcp.trueproxies.com/mcp --header 'Authorization: your-value'

動かす前に、空欄の値を入力してください。

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "trueproxies": {
      "url": "https://mcp.trueproxies.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "trueproxies": {
      "type": "http",
      "url": "https://mcp.trueproxies.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

このアドレスはリクエストの header にキーが必要ですが、コネクタを追加するメニューでは設定できません。代わりにClaude Code、Cursor、VS Codeを使ってください。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

自分で入力する値

  • Authorization 秘密 HTTP header
    TrueProxies API key as 'Bearer tp_api_...'. list_plans works without one.

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • check_connection

    Sends one request through the service from TrueProxies and reports the outcome and exit IP, to tell a proxy problem apart from a website refusing you. It counts as use of the service: it uses a little traffic and starts an unused free trial. Does not measure speed. Limited to a f

  • generate_endpoints

    Builds proxy connection lines for a service with the chosen protocol, format, location targeting and session type: one line, or up to 1,000 sticky sessions with session sticky. Does not change the service. The output contains the proxy username and password, which let anyone who

  • get_account

    Returns the TrueProxies account that owns the API key: account reference, email, role, status and billing details.

  • get_invoice

    Returns one invoice: status, amounts in cents, payment attempts and its service. Does not start a payment.

  • get_live_traffic

    Returns live traffic for one service: download and upload speed in bits per second over the last ten seconds, traffic used today (UTC) and recent connection outcomes. last_activity_at shows how fresh the data is.

  • get_service

    Returns one service: status, expiry, connection hosts and ports, capabilities (the targeting and session options it supports) and effective limits. Does not return the proxy password.

  • get_traffic_used

    Returns traffic for one service, in bytes: bytes_out is downloaded and bytes_in is uploaded since the service started, remaining_bytes is traffic remaining and allowance_bytes is the allowance. traffic_batches lists traffic packs; traffic bought now never expires, and only older

  • get_usage_history

    Returns usage history for one service, or for the whole account when service_id is empty: connection success, traffic and connection errors over the last 24h, 7d or 30d. In series, bytes_out is downloaded and bytes_in is uploaded. Can lag recent traffic.

  • list_invoices

    Lists invoices with status (open, paid or cancelled), kind, amount in cents and the service each belongs to. Paginated: pass next_cursor from the previous response as cursor.

  • list_plans

    Lists TrueProxies plans and traffic packs: price in US cents, term, speed, connection limits, traffic allowance and targeting capabilities. Also returns the cities available for city targeting and whether the free trial is open. Traffic packs (residential_ipv4_gb, residential_ipv

  • list_services

    Lists the services on the account with status, product, plan, expiry and connection hosts. Paginated: pass next_cursor from the previous response as cursor.

  • list_trusted_ips

    Lists the IP whitelist of a service: addresses allowed to connect without the proxy password.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月7日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン trueproxies.com で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    560ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    12件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32623件のうち0%よりスターが多い
  • このカテゴリのほかの32623件のうち90%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32623件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

TrueProxiesは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

入力が必要なもの:Authorization

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.5)がレジストリに届いたのは3 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Draugr

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211一昨日更新
インストール

Draugr

作者:draugr-dev

Security scanning for AI agents: SAST, SCA, secrets, IaC, DAST, ranked by real risk.

パソコンで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

TrueProxies MCP server

Connect Claude, Cursor or any MCP client to your TrueProxies account. Ask about plans and prices, your services, traffic used, live traffic, usage history and invoices, generate endpoints and check a connection.

The server cannot buy, pay, change your proxy password or change the IP whitelist. Every tool only reads, except check_connection, which sends one request through your service.

Tools

ToolWhat it returnsAPI key scope
list_plansPlans, traffic packs, prices, cities, free trial availabilitynone
get_accountYour accountservices:read
list_servicesYour servicesservices:read
get_serviceOne service: hosts, ports, capabilities, limitsservices:read
get_traffic_usedTraffic used and remainingservices:read
get_live_trafficLive download and upload speed, traffic used todayservices:read
get_usage_historyConnection success, traffic and connection errors over 24h, 7d or 30dservices:read
list_invoicesYour invoicesbilling:read
get_invoiceOne invoicebilling:read
generate_endpointsProxy connection lines, including the username and passwordproxy:read
check_connectionThe result and exit IP of one request through your service. It uses a little traffic and starts an unused free trial.proxy:read
list_trusted_ipsThe IP whitelist of a serviceproxy:read

API key

Create an API key in the TrueProxies dashboard under API. For read-only use, give it services:read and billing:read. Add proxy:read only if the assistant should generate endpoints, check connections or list whitelisted IPs: endpoints contain your proxy password.

Connect

Hosted (nothing to install):

claude mcp add --transport http trueproxies https://mcp.trueproxies.com/mcp \

--header "Authorization: Bearer $TRUEPROXIES_API_KEY"

Cursor (~/.cursor/mcp.json):

{

"mcpServers": { "trueproxies": { "url": "https://mcp.trueproxies.com/mcp", "headers": { "Authorization": "Bearer ${env:TRUEPROXIES_API_KEY}" } } } }

Local, with Docker. Build the image once:

docker build -t trueproxies-mcp https://github.com/trueproxies-com/trueproxies-mcp.git
{

"mcpServers": { "trueproxies": { "command": "docker", "args": ["run", "-i", "--rm", "-e", "TRUEPROXIES_API_KEY", "trueproxies-mcp"], "env": { "TRUEPROXIES_API_KEY": "tp_api_..." } } } }

Local, with Go: go install github.com/trueproxies-com/trueproxies-mcp@latest, then run trueproxies-mcp stdio with TRUEPROXIES_API_KEY set.

Privacy

The hosted server forwards your API key to api.trueproxies.com for each call and keeps nothing. It logs the tool name, status, request ID and duration, never arguments, results or keys. mcp.trueproxies.com is served through Cloudflare, which decrypts traffic in transit like any Cloudflare-proxied site, so your API key and any endpoints pass through Cloudflare. To avoid that, run the server locally.

Links

License

MIT

PopNxに聞く